Skip to content
maunawai.info

Drinking water in Schwenden im Diemtigtal

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
6.4 °dH
Hardness range soft
Key values Alpschopf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2.67 mg/l 40 mg/l
7 %
Mean · Alpschopf
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Alpschopf
Sulphate 2.16 mg/l Mean · Alpschopf
Sodium 0.206 mg/l 200 mg/l
0.1 %
Mean · Alpschopf
Show all recorded parameters (18 — most recent value per parameter)

Microbiology (3)

Microbiology – Alpschopf
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria nn
not detectable
Unit not stated in the document
300 1/ml Mean · Alpschopf
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Alpschopf
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Alpschopf

Chemical parameters (2)

Chemical parameters – Alpschopf
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.05 mg/l
below limit of quantification
1.5 mg/l
< 3 % *
Mean · Alpschopf
Nitrate 2.67 mg/l 40 mg/l
7 %
Mean · Alpschopf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Alpschopf
Parameter Value Parametric value Share of the parametric value Reference
Chloride < 2 mg/l
below limit of quantification
Mean · Alpschopf
Conductivity (25 °C) 221 µS/cm Mean · Alpschopf
pH 7.95 Mean · Alpschopf
Sodium 0.206 mg/l 200 mg/l
0.1 %
Mean · Alpschopf
Sulphate 2.16 mg/l Mean · Alpschopf
Temperature 9.1 °C Mean · Alpschopf
Turbidity 0.06 TE/F Mean · Alpschopf

Further parameters (6)

Further parameters – Alpschopf
Parameter Value Parametric value Share of the parametric value Reference
Calcium 32.8 mg/l Mean · Alpschopf
Dissolved organic carbon (DOC) 0.62 mg/l Mean · Alpschopf
Hydrogen carbonate 135.49 mg/l Mean · Alpschopf
Magnesium 2.19 mg/l Mean · Alpschopf
Potassium 0.142 mg/l Mean · Alpschopf
Total hardness 11.46 °fH Mean · Alpschopf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 3757

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
11 °dH
Hardness range medium
Key values Grimmialp
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.63 mg/l 40 mg/l
12 %
Mean · Grimmialp
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Grimmialp
Sulphate 59.52 mg/l Mean · Grimmialp
Sodium 1.1 mg/l 200 mg/l
0.5 %
Mean · Grimmialp
Show all recorded parameters (18 — most recent value per parameter)

Microbiology (3)

Microbiology – Grimmialp
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0.8 KBE/ml 300 1/ml Mean · Grimmialp
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Grimmialp
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Grimmialp

Chemical parameters (2)

Chemical parameters – Grimmialp
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.09 mg/l 1.5 mg/l
6 %
Mean · Grimmialp
Nitrate 4.63 mg/l 40 mg/l
12 %
Mean · Grimmialp

Indicator parameters (7)

Indicator parameters – Grimmialp
Parameter Value Parametric value Share of the parametric value Reference
Chloride < 2 mg/l
below limit of quantification
Mean · Grimmialp
Conductivity (25 °C) 355 µS/cm Mean · Grimmialp
pH 7.82 Mean · Grimmialp
Sodium 1.1 mg/l 200 mg/l
0.5 %
Mean · Grimmialp
Sulphate 59.52 mg/l Mean · Grimmialp
Temperature 8 °C Mean · Grimmialp
Turbidity 0.04 TE/F Mean · Grimmialp

Further parameters (6)

Further parameters – Grimmialp
Parameter Value Parametric value Share of the parametric value Reference
Calcium 47.1 mg/l Mean · Grimmialp
Dissolved organic carbon (DOC) 0.41 mg/l Mean · Grimmialp
Hydrogen carbonate 223.58 mg/l Mean · Grimmialp
Magnesium 7.69 mg/l Mean · Grimmialp
Potassium 0.533 mg/l Mean · Grimmialp
Total hardness 19.58 °fH Mean · Grimmialp

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 3757

Frequently asked questions about drinking water in Schwenden im Diemtigtal

How hard is the water in Schwenden im Diemtigtal?
Wasserversorgung Grimmialp - Schwenden publishes a total hardness of 11.46 °fH for the supply zone Alpschopf — that corresponds to 6.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Schwenden im Diemtigtal?
Wasserversorgung Grimmialp - Schwenden publishes a nitrate value of 2.67 mg/l for the supply zone Alpschopf. The statutory parametric value is 40 mg/l; the measured value represents 7 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Schwenden im Diemtigtal?
Wasserversorgung Grimmialp - Schwenden. The values shown here come from the supply zone Alpschopf and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.