Skip to content
maunawai.info

Drinking water in Schlüchtern

12 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Ahlersbach (TB Frohnwiesen)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Ahlersbach (TB Frohnwiesen)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Show 11 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Breitenbach (TB Kressenbach)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Breitenbach (TB Kressenbach)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Drasenberg (TB Wallroth)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Drasenberg (TB Wallroth)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Elm (TB Zementwerk)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · Elm (TB Zementwerk)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Gomfritz (TB Wallroth)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Gomfritz (TB Wallroth)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Gundhelm (Q Gundhelm)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Gundhelm (Q Gundhelm)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Herolz (TB Herolz)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Herolz (TB Herolz)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Hinkelhof (Q Gundhelm)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Hinkelhof (Q Gundhelm)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Hohenzell (TB Frohnwiesen)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Hohenzell (TB Frohnwiesen)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Hutten (TB Hutten)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Hutten (TB Hutten)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Klosterhöfe (TB Wallroth)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Klosterhöfe (TB Wallroth)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Kressenbach (TB Kressenbach)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Kressenbach (TB Kressenbach)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schluechtern.de/fileadmin/user_upload/dokumente/rathaus_verwaltung/formulare/t/2017_Trinkwasserhaerte.pdf · Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016 · 2017 und 2018 · retrieved on 08/07/2026

Postcodes in this zone: 36381

Frequently asked questions about drinking water in Schlüchtern

How hard is the water in Schlüchtern?
Stadtwerke Schlüchtern (Eigenbetrieb, Abt. Wasserversorgung) publishes the hardness range mittel for the supply zone Ahlersbach (TB Frohnwiesen). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Auswertung aus den Untersuchungsberichten vom 12.Dez. 2016, retrieved on 08/07/2026.
Who supplies the drinking water in Schlüchtern?
Stadtwerke Schlüchtern (Eigenbetrieb, Abt. Wasserversorgung). The values shown here come from the supply zone Ahlersbach (TB Frohnwiesen) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.