Skip to content
maunawai.info

Drinking water in Schänis

One supply zone, water supplier: Wasserkorporation Schänis.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Schänis, Dorf-Schänis, Rufi, Maseltrangen

Wasserkorporation Schänis

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
11.5 °dH
Hardness range medium
Key values Schänis, Dorf-Schänis, Rufi, Maseltrangen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3 mg/l 40 mg/l
8 %
Mean · Schänis, Dorf-Schänis, Rufi, Maseltrangen
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Schänis, Dorf-Schänis, Rufi, Maseltrangen
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Schänis, Dorf-Schänis, Rufi, Maseltrangen
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 2.3 KBE/ml 300 1/ml Mean · Schänis, Dorf-Schänis, Rufi, Maseltrangen
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Schänis, Dorf-Schänis, Rufi, Maseltrangen
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Schänis, Dorf-Schänis, Rufi, Maseltrangen

Chemical parameters (1)

Chemical parameters – Schänis, Dorf-Schänis, Rufi, Maseltrangen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3 mg/l 40 mg/l
8 %
Mean · Schänis, Dorf-Schänis, Rufi, Maseltrangen

Further parameters (3)

Further parameters – Schänis, Dorf-Schänis, Rufi, Maseltrangen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 62 mg/l Mean · Schänis, Dorf-Schänis, Rufi, Maseltrangen
Magnesium 12.3 mg/l Mean · Schänis, Dorf-Schänis, Rufi, Maseltrangen
Total hardness 20.5 °fH Mean · Schänis, Dorf-Schänis, Rufi, Maseltrangen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8718

Frequently asked questions about drinking water in Schänis

How hard is the water in Schänis?
Wasserkorporation Schänis publishes a total hardness of 20.5 °fH for the supply zone Schänis, Dorf-Schänis, Rufi, Maseltrangen — that corresponds to 11.5 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Schänis?
Wasserkorporation Schänis publishes a nitrate value of 3 mg/l for the supply zone Schänis, Dorf-Schänis, Rufi, Maseltrangen. The statutory parametric value is 40 mg/l; the measured value represents 8 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Schänis?
Wasserkorporation Schänis. The values shown here come from the supply zone Schänis, Dorf-Schänis, Rufi, Maseltrangen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.