Skip to content
maunawai.info

Drinking water in Saland

6 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
20.4 °dH
Hardness range hard
Key values Au
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9.05 mg/l 40 mg/l
23 %
Mean · Au
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Au
Sulphate 5.75 mg/l Mean · Au
Sodium 6.15 mg/l 200 mg/l
3 %
Mean · Au
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Au
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Au
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Au
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Au

Chemical parameters (2)

Chemical parameters – Au
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Au
Nitrate 9.05 mg/l 40 mg/l
23 %
Mean · Au

Indicator parameters (4)

Indicator parameters – Au
Parameter Value Parametric value Share of the parametric value Reference
Chloride 10.25 mg/l Mean · Au
pH 7.2 Mean · Au
Sodium 6.15 mg/l 200 mg/l
3 %
Mean · Au
Sulphate 5.75 mg/l Mean · Au

Further parameters (4)

Further parameters – Au
Parameter Value Parametric value Share of the parametric value Reference
Calcium 98.05 mg/l Mean · Au
Magnesium 28.95 mg/l Mean · Au
Potassium 1.7 mg/l Mean · Au
Total hardness 36.4 °fH Mean · Au

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3406/au · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8493

Show 5 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
17.9 °dH
Hardness range hard
Key values Gemeinde Bauma
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7.9 mg/l 40 mg/l
20 %
Mean · Gemeinde Bauma
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Gemeinde Bauma
Sodium 7.6 mg/l 200 mg/l
4 %
Mean · Gemeinde Bauma
Show all recorded parameters (8 — most recent value per parameter)

Microbiology (3)

Microbiology – Gemeinde Bauma
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 9 KBE/ml 300 1/ml Mean · Gemeinde Bauma
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Gemeinde Bauma
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Gemeinde Bauma

Chemical parameters (1)

Chemical parameters – Gemeinde Bauma
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7.9 mg/l 40 mg/l
20 %
Mean · Gemeinde Bauma

Indicator parameters (1)

Indicator parameters – Gemeinde Bauma
Parameter Value Parametric value Share of the parametric value Reference
Sodium 7.6 mg/l 200 mg/l
4 %
Mean · Gemeinde Bauma

Further parameters (3)

Further parameters – Gemeinde Bauma
Parameter Value Parametric value Share of the parametric value Reference
Calcium 85 mg/l Mean · Gemeinde Bauma
Magnesium 20 mg/l Mean · Gemeinde Bauma
Total hardness 32 °fH Mean · Gemeinde Bauma

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8493

Huben

WV Wila

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.5 °dH
Hardness range hard
Key values Huben
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.375 mg/l 40 mg/l
11 %
Mean · Huben
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Huben
Sulphate 2.75 mg/l Mean · Huben
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Huben
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Huben
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3.25 KBE/ml 300 1/ml Mean · Huben
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Huben
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Huben

Chemical parameters (2)

Chemical parameters – Huben
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Huben
Nitrate 4.375 mg/l 40 mg/l
11 %
Mean · Huben

Indicator parameters (4)

Indicator parameters – Huben
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.375 mg/l Mean · Huben
pH 7.75 Mean · Huben
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Huben
Sulphate 2.75 mg/l Mean · Huben

Further parameters (4)

Further parameters – Huben
Parameter Value Parametric value Share of the parametric value Reference
Calcium 74.7 mg/l Mean · Huben
Magnesium 17.65 mg/l Mean · Huben
Potassium 1.375 mg/l Mean · Huben
Total hardness 25.9 °fH Mean · Huben

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3404/huben · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8493

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.3 °dH
Hardness range hard
Key values Loch
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.35 mg/l 40 mg/l
11 %
Mean · Loch
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Loch
Sulphate 2.35 mg/l Mean · Loch
Sodium 4.85 mg/l 200 mg/l
2 %
Mean · Loch
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Loch
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 26.5 KBE/ml 300 1/ml Mean · Loch
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Loch
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Loch

Chemical parameters (2)

Chemical parameters – Loch
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Loch
Nitrate 4.35 mg/l 40 mg/l
11 %
Mean · Loch

Indicator parameters (4)

Indicator parameters – Loch
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.35 mg/l Mean · Loch
pH 7.55 Mean · Loch
Sodium 4.85 mg/l 200 mg/l
2 %
Mean · Loch
Sulphate 2.35 mg/l Mean · Loch

Further parameters (4)

Further parameters – Loch
Parameter Value Parametric value Share of the parametric value Reference
Calcium 72.95 mg/l Mean · Loch
Magnesium 17.7 mg/l Mean · Loch
Potassium 1.3 mg/l Mean · Loch
Total hardness 25.45 °fH Mean · Loch

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3408/loch · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8493

Steinenbachtal

WV Wila

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.3 °dH
Hardness range hard
Key values Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.266 mg/l 40 mg/l
11 %
Mean · Steinenbachtal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal
Sulphate 2.266 mg/l Mean · Steinenbachtal
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Steinenbachtal
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 20.67 KBE/ml 300 1/ml Mean · Steinenbachtal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal

Chemical parameters (2)

Chemical parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Steinenbachtal
Nitrate 4.266 mg/l 40 mg/l
11 %
Mean · Steinenbachtal

Indicator parameters (4)

Indicator parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.533 mg/l Mean · Steinenbachtal
pH 7.466 Mean · Steinenbachtal
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Steinenbachtal
Sulphate 2.266 mg/l Mean · Steinenbachtal

Further parameters (4)

Further parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 72.933 mg/l Mean · Steinenbachtal
Magnesium 17.833 mg/l Mean · Steinenbachtal
Potassium 1.333 mg/l Mean · Steinenbachtal
Total hardness 25.533 °fH Mean · Steinenbachtal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3405/steinenbachtal · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8493

Wila Dorf

WV Wila

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
16.3 °dH
Hardness range hard
Key values Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7.1 mg/l 40 mg/l
18 %
Mean · Wila Dorf
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wila Dorf
Sulphate 3 mg/l Mean · Wila Dorf
Sodium 3.6 mg/l 200 mg/l
2 %
Mean · Wila Dorf
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3.67 KBE/ml 300 1/ml Mean · Wila Dorf
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wila Dorf
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wila Dorf

Chemical parameters (2)

Chemical parameters – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Wila Dorf
Nitrate 7.1 mg/l 40 mg/l
18 %
Mean · Wila Dorf

Indicator parameters (4)

Indicator parameters – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Chloride 4.67 mg/l Mean · Wila Dorf
pH 7.4 Mean · Wila Dorf
Sodium 3.6 mg/l 200 mg/l
2 %
Mean · Wila Dorf
Sulphate 3 mg/l Mean · Wila Dorf

Further parameters (4)

Further parameters – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Calcium 82.1 mg/l Mean · Wila Dorf
Magnesium 20.8 mg/l Mean · Wila Dorf
Potassium 1 mg/l Mean · Wila Dorf
Total hardness 29.1 °fH Mean · Wila Dorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3402/wila-dorf · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8493

Frequently asked questions about drinking water in Saland

How hard is the water in Saland?
WV Wila publishes a total hardness of 36.4 °fH for the supply zone Au — that corresponds to 20.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Saland?
WV Wila publishes a nitrate value of 9.05 mg/l for the supply zone Au. The statutory parametric value is 40 mg/l; the measured value represents 23 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Saland?
WV Wila. The values shown here come from the supply zone Au and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.