Skip to content
maunawai.info

Drinking water in Sala Consilina

One supply zone, water supplier: Stadtwerke Landshut.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Brunnen Siebensee, Schloßberg sowie Versorgungsnetz

Stadtwerke Landshut

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Brunnen Siebensee, Schloßberg sowie Versorgungsnetz
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS n. n. mg/l
not detectable
0.1 µg/l Single value
Nitrate 9,7 mg/l 50 mg/l
19 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Sulphate 39 mg/l 250 mg/l
16 %
Single value
Sodium 13,7 mg/l 200 mg/l
7 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Chemical parameters (14)

Chemical parameters – Brunnen Siebensee, Schloßberg sowie Versorgungsnetz
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Bisphenol A < 0,00005 mg/l
below limit of quantification
2.5 µg/l
< 2 % *
Single value
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper 0,011 mg/l 2 mg/l
0.5 %
Single value
Cyanide < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Fluoride 0,16 mg/l 1.5 mg/l
11 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate 9,7 mg/l 50 mg/l
19 %
Single value
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Tetrachloroethene and Trichloroethene (sum) n. n. mg/l
not detectable
10 µg/l Single value
Trihalomethanes — Total n. n. mg/l
not detectable
50 µg/l Single value
Uranium 0,0040 mg/l 10 µg/l
40 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Brunnen Siebensee, Schloßberg sowie Versorgungsnetz
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS n. n. mg/l
not detectable
0.1 µg/l Single value

Indicator parameters (8)

Indicator parameters – Brunnen Siebensee, Schloßberg sowie Versorgungsnetz
Parameter Value Parametric value Share of the parametric value Reference
Chloride 22,9 mg/l 250 mg/l
9 %
Single value
Colour farblos
Unit not stated in the document
0.5 m⁻¹ Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,4 6,5–9,5 Maximum
Sodium 13,7 mg/l 200 mg/l
7 %
Single value
Sulphate 39 mg/l 250 mg/l
16 %
Single value
Temperature 14,7 °C Maximum
Turbidity klar
Unit not stated in the document
1 NTU Single value

Further parameters (7)

Further parameters – Brunnen Siebensee, Schloßberg sowie Versorgungsnetz
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,37 mmol/l Single value
Base capacity to pH 8.2 0,61 mmol/l Single value
Calcium 99,8 mg/l Single value
Carbonate hardness 17,7 °dH Single value
Magnesium 27,1 mg/l Single value
Potassium 2,8 mg/l Single value
Sum of alkaline earth metals 3,60 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-landshut.de/wp-content/uploads/Trinkwasser-Pruefbericht-Landshut.pdf · Februar 2026 · Februar 2026 · retrieved on 11/07/2026

Postcodes in this zone: 84036

Frequently asked questions about drinking water in Sala Consilina

How much nitrate is in the drinking water in Sala Consilina?
Stadtwerke Landshut publishes a nitrate value of 9,7 mg/l for the supply zone Brunnen Siebensee, Schloßberg sowie Versorgungsnetz. The statutory parametric value is 50 mg/l; the measured value represents 19 % of the parametric value. Basis: Februar 2026, retrieved on 11/07/2026.
Are PFAS detectable in the drinking water in Sala Consilina?
Stadtwerke Landshut states for the supply zone Brunnen Siebensee, Schloßberg sowie Versorgungsnetz that the sum PFAS-20 was not detectable (entry in the report: "n. n."). This is not to be read as "PFAS-free": below the limit of quantification, the measurement cannot make any statement. The statutory parametric value is 0.1 µg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Februar 2026, retrieved on 11/07/2026.
Who supplies the drinking water in Sala Consilina?
Stadtwerke Landshut. The values shown here come from the supply zone Brunnen Siebensee, Schloßberg sowie Versorgungsnetz and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.