Skip to content
maunawai.info

Drinking water in Rorschach

One supply zone, water supplier: Technische Betriebe Rorschach.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
9.2 °dH
Hardness range medium
Key values Stadt Rorschach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Stadt Rorschach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Stadt Rorschach
Sulphate 33.5 mg/l Mean · Stadt Rorschach
Sodium 6.09 mg/l 200 mg/l
3 %
Mean · Stadt Rorschach
Show all recorded parameters (18 — most recent value per parameter)

Microbiology (3)

Microbiology – Stadt Rorschach
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 4 KBE/ml 300 1/ml Mean · Stadt Rorschach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Stadt Rorschach
Intestinal enterococci 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Stadt Rorschach

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Chemical parameters (2)

Chemical parameters – Stadt Rorschach
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Mean · Stadt Rorschach
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Stadt Rorschach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Stadt Rorschach
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7.75 mg/l Mean · Stadt Rorschach
Conductivity (25 °C) 304 µS/cm Mean · Stadt Rorschach
Iron 0.005 mg/l 0.2 mg/l
3 %
Mean · Stadt Rorschach
Manganese 0.0003 mg/l 50 µg/l
0.6 %
Mean · Stadt Rorschach
pH 8 Mean · Stadt Rorschach
Sodium 6.09 mg/l 200 mg/l
3 %
Mean · Stadt Rorschach
Sulphate 33.5 mg/l Mean · Stadt Rorschach
Temperature 10 °C Mean · Stadt Rorschach

Further parameters (5)

Further parameters – Stadt Rorschach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 53 mg/l Mean · Stadt Rorschach
Dissolved organic carbon (DOC) 0.83 mg/l Mean · Stadt Rorschach
Magnesium 9 mg/l Mean · Stadt Rorschach
Potassium 1.4 mg/l Mean · Stadt Rorschach
Total hardness 16.5 °fH Mean · Stadt Rorschach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 9400

Frequently asked questions about drinking water in Rorschach

How hard is the water in Rorschach?
Technische Betriebe Rorschach publishes a total hardness of 16.5 °fH for the supply zone Stadt Rorschach — that corresponds to 9.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2022, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Rorschach?
Technische Betriebe Rorschach publishes a nitrate value of 4 mg/l for the supply zone Stadt Rorschach. The statutory parametric value is 40 mg/l; the measured value represents 10 % of the parametric value. Basis: 2022, retrieved on 07/08/2026.
Who supplies the drinking water in Rorschach?
Technische Betriebe Rorschach. The values shown here come from the supply zone Stadt Rorschach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.