Drinking water in Röllbach
One supply zone, water supplier: Gemeinde Röllbach.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
MS ON Röllbach Kindergarten, Heizung vor Wasseruhr
Gemeinde RöllbachAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 07/04/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | n.n. mg/l not detectable | — | — | Single value |
| Nitrate | 38,3 mg/l | 50 mg/l | 77 % | Single value |
| Lead | 0,001 mg/l | 10 µg/l | 10 % | Single value |
| Sulphate | 36,5 mg/l | 250 mg/l | 15 % | Single value |
| Sodium | 5,7 mg/l | 200 mg/l | 3 % | Single value |
Show all recorded parameters (75 — most recent value per parameter)
Chemical parameters (38)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Acrylamide | n.u. mg/l not determined | 0.1 µg/l | — | Single value |
| Antimony | <0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | 0,0009 mg/l | 10 µg/l | 9 % | Single value |
| Benzene | <0,0002 mg/l below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Benzo(a)pyrene | <0,000003 mg/l below limit of quantification | 10 ng/l | < 30 % * | Single value |
| Bisphenol A | <0,0001 mg/l below limit of quantification | 2.5 µg/l | < 4 % * | Single value |
| Boron | 0,01 mg/l | 1 mg/l | 1 % | Single value |
| Bromate | <0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Bromodichloromethane | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| Chlorate | n.u. mg/l not determined | 70 µg/l | — | Single value |
| Chlorite | n.u. mg/l not determined | 0.2 mg/l | — | Single value |
| Chromium | 0,0002 mg/l | 25 µg/l | 0.8 % | Single value |
| Copper | 0,005 mg/l | 2 mg/l | 0.3 % | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Dibromoacetic acid | n.u. mg/l not determined | — | — | Single value |
| Dibromochloromethane | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Dichloroacetic acid | n.u. mg/l not determined | — | — | Single value |
| Epichlorohydrin | n.u. mg/l not determined | 0.1 µg/l | — | Single value |
| Fluoride | 0,15 mg/l | 1.5 mg/l | 10 % | Single value |
| Haloacetic acids (HAA) | n.u. mg/l not determined | — | — | Single value |
| Lead | 0,001 mg/l | 10 µg/l | 10 % | Single value |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Microcystin-LR | n.u. mg/l not determined | — | — | Single value |
| Monobromoacetic acid | n.u. mg/l not determined | — | — | Single value |
| Monochloroacetic acid | n.u. mg/l not determined | — | — | Single value |
| Nickel | <0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 38,3 mg/l | 50 mg/l | 77 % | Single value |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Polycyclic aromatic hydrocarbons | <0,00002 mg/l below limit of quantification | 0.1 µg/l | < 20 % * | Single value |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Tribromomethane (bromoform) | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Trichloroacetic acid | n.u. mg/l not determined | — | — | Single value |
| Trichloromethane (chloroform) | <0,001 mg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | <0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Uranium | 0,001 mg/l | 10 µg/l | 10 % | Single value |
| Vinyl chloride | n.u. mg/l not determined | 0.5 µg/l | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (18)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorododecane sulfonic acid (PFDoDS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Sum of 4 PFAS | n.n. mg/l not detectable | — | — | Single value |
| Sum of PFAS | n.n. mg/l not detectable | — | — | Single value |
Indicator parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Ammonium | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Calcite dissolution capacity | -19,4 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 23,0 mg/l | 250 mg/l | 9 % | Single value |
| Colour | <0,02 1/m below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Iron | 0,003 mg/l | 0.2 mg/l | 2 % | Single value |
| Manganese | <0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Sodium | 5,7 mg/l | 200 mg/l | 3 % | Single value |
| Sulphate | 36,5 mg/l | 250 mg/l | 15 % | Single value |
| Taste | typisch | für den Verbraucher annehmbar | — | Single value |
| Total organic carbon (TOC) | 0,4 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | 0,05 NTU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,26 mmol/l | — | — | Single value |
| Calcium | 102 mg/l | — | — | Single value |
| Hardness range (WRMG) | hart | — | — | Single value |
| Magnesium | 19,1 mg/l | — | — | Single value |
| Potassium | 1,1 mg/l | — | — | Single value |
| Sum of alkaline earth metals | 3,33 mmol/l | — | — | Single value |
| Total hardness | 18,6 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 63934
Frequently asked questions about drinking water in Röllbach
- How hard is the water in Röllbach?
- Gemeinde Röllbach publishes a total hardness of 18.6 °dH for the supply zone MS ON Röllbach Kindergarten, Heizung vor Wasseruhr (hardness range hart). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 12.05.2025, retrieved on 14/07/2026.
- How much nitrate is in the drinking water in Röllbach?
- Gemeinde Röllbach publishes a nitrate value of 38,3 mg/l for the supply zone MS ON Röllbach Kindergarten, Heizung vor Wasseruhr. The statutory parametric value is 50 mg/l; the measured value represents 77 % of the parametric value. Basis: 12.05.2025, retrieved on 14/07/2026.
- Who supplies the drinking water in Röllbach?
- Gemeinde Röllbach. The values shown here come from the supply zone MS ON Röllbach Kindergarten, Heizung vor Wasseruhr and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.