Skip to content
maunawai.info

Drinking water in Riex

One supply zone, water supplier: Commune de Bourg-en-Lavaux.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.4 °dH
Hardness range hard
Key values Riex
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 18 mg/l 40 mg/l
45 %
Mean · Riex
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Riex
Sulphate 7 mg/l Mean · Riex
Sodium 10.1 mg/l 200 mg/l
5 %
Mean · Riex
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – Riex
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Riex
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Riex
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Riex

Chemical parameters (2)

Chemical parameters – Riex
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Riex
Nitrate 18 mg/l 40 mg/l
45 %
Mean · Riex

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Riex
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0.009 µg/l 0.1 µg/l
9 %
Mean · Riex
Chlorothalonil metabolite R471811 0.038 µg/l 0.1 µg/l
38 %
Mean · Riex

Indicator parameters (7)

Indicator parameters – Riex
Parameter Value Parametric value Share of the parametric value Reference
Chloride 20.1 mg/l Mean · Riex
Conductivity (25 °C) 620 µS/cm Mean · Riex
pH 7.7 Mean · Riex
Sodium 10.1 mg/l 200 mg/l
5 %
Mean · Riex
Sulphate 7 mg/l Mean · Riex
Temperature 15 °C Mean · Riex
Turbidity 0.4 TE/F Mean · Riex

Further parameters (6)

Further parameters – Riex
Parameter Value Parametric value Share of the parametric value Reference
Calcium 90 mg/l Mean · Riex
Dissolved organic carbon (DOC) 0.5 mg/l Mean · Riex
Hydrogen carbonate 372 mg/l Mean · Riex
Magnesium 25.8 mg/l Mean · Riex
Potassium 1.7 mg/l Mean · Riex
Total hardness 32.9 °fH Mean · Riex

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/958/commune-de-bourg-en-lavaux/2557/riex · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 1097

Frequently asked questions about drinking water in Riex

How hard is the water in Riex?
Commune de Bourg-en-Lavaux publishes a total hardness of 32.9 °fH for the supply zone Riex — that corresponds to 18.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Riex?
Commune de Bourg-en-Lavaux publishes a nitrate value of 18 mg/l for the supply zone Riex. The statutory parametric value is 40 mg/l; the measured value represents 45 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Riex?
Commune de Bourg-en-Lavaux. The values shown here come from the supply zone Riex and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.