How hard is the water in Riein?

Ilanz/Glion publishes a total hardness of 27 °fH for the supply zone Riein — that corresponds to 15.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2026, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Riein?

Ilanz/Glion publishes a nitrate value of 1.4 mg/l for the supply zone Riein. The statutory parametric value is 40 mg/l; the measured value represents 3 % of the parametric value. Basis: 2026, retrieved on 07/08/2026.

Who supplies the drinking water in Riein?

Ilanz/Glion. The values shown here come from the supply zone Riein and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Riein

One supply zone, water supplier: Ilanz/Glion.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Riein

Ilanz/Glion

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

15.1 °dH

Hardness range hard

Key values Riein
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	1.4 mg/l	40 mg/l	3 %	Mean · Riein
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Riein

Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Riein
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	nn not detectable Unit not stated in the document	300 1/ml	—	Mean · Riein
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Riein
Intestinal enterococci	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Riein

Chemical parameters (1)

Chemical parameters – Riein
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	1.4 mg/l	40 mg/l	3 %	Mean · Riein

Further parameters (3)

Further parameters – Riein
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	96 mg/l	—	—	Mean · Riein
Magnesium	7.85 mg/l	—	—	Mean · Riein
Total hardness	27 °fH	—	—	Mean · Riein

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1064/ilanzglion/3243/riein · 2026 · 2026 · retrieved on 07/08/2026

Postcodes in this zone: 7128

Frequently asked questions about drinking water in Riein

How hard is the water in Riein?: Ilanz/Glion publishes a total hardness of 27 °fH for the supply zone Riein — that corresponds to 15.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2026, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Riein?: Ilanz/Glion publishes a nitrate value of 1.4 mg/l for the supply zone Riein. The statutory parametric value is 40 mg/l; the measured value represents 3 % of the parametric value. Basis: 2026, retrieved on 07/08/2026.
Who supplies the drinking water in Riein?: Ilanz/Glion. The values shown here come from the supply zone Riein and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.