Skip to content
maunawai.info

Drinking water in Rheinberg

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12,6
Hardness range mittel
Key values rheinberg gesamt
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,000 Single value
Nitrate 9,6
Unit not stated in the document
50 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Lead <0,002
below limit of quantification
Unit not stated in the document
10 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Escherichia coli (E. coli) 0
Unit not stated in the document
0/100 ml Maximum · Median 0 · Rohrleitungsnetz KWW GmbH, 2025
Sulphate 52,5
Unit not stated in the document
250 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Sodium 29,1
Unit not stated in the document
200 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Show all recorded parameters (50 — most recent value per parameter)

Microbiology (1)

Microbiology – rheinberg gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0
Unit not stated in the document
0/100 ml Maximum · Median 0 · Rohrleitungsnetz KWW GmbH, 2025

Chemical parameters (24)

Chemical parameters – rheinberg gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1
below limit of quantification
Unit not stated in the document
3 µg/l Single value
Acrylamide <0,03
below limit of quantification
Unit not stated in the document
0.1 µg/l Single value
Antimony <0,0010
below limit of quantification
Unit not stated in the document
5 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Arsenic 0,0013
Unit not stated in the document
10 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Benzene <0,05
below limit of quantification
Unit not stated in the document
1 µg/l Single value
Benzo(a)pyrene <0,002
below limit of quantification
Unit not stated in the document
10 ng/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Bisphenol A <0,010
below limit of quantification
Unit not stated in the document
2.5 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Boron 0,064
Unit not stated in the document
1 mg/l Single value
Bromate <0,002
below limit of quantification
Unit not stated in the document
10 µg/l Single value
Cadmium <0,0002
below limit of quantification
Unit not stated in the document
3 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Chromium <0,00050
below limit of quantification
Unit not stated in the document
25 µg/l Single value
Copper 0,057
Unit not stated in the document
2 mg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Cyanide <0,0050
below limit of quantification
Unit not stated in the document
50 µg/l Single value
Epichlorohydrin <0,003
below limit of quantification
Unit not stated in the document
0.1 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Fluoride 0,08
Unit not stated in the document
1.5 mg/l Single value
Lead <0,002
below limit of quantification
Unit not stated in the document
10 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Mercury <0,00010
below limit of quantification
Unit not stated in the document
1 µg/l Single value
Nickel <0,0020
below limit of quantification
Unit not stated in the document
20 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Nitrate 9,6
Unit not stated in the document
50 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Nitrite <0,020
below limit of quantification
Unit not stated in the document
0.5 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Polycyclic aromatic hydrocarbons 0
Unit not stated in the document
0.1 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025
Selenium <0,0010
below limit of quantification
Unit not stated in the document
10 µg/l Single value
Uranium 0,00073
Unit not stated in the document
10 µg/l Single value
Vinyl chloride <0,05
below limit of quantification
Unit not stated in the document
0.5 µg/l Maximum · Rohrleitungsnetz KWW GmbH, 2025

PFAS (2)

PFAS – rheinberg gesamt
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,000 Single value
Sum of PFAS 0,000 Single value

Indicator parameters (15)

Indicator parameters – rheinberg gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,010
below limit of quantification
Unit not stated in the document
0.2 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Ammonium <0,020
below limit of quantification
Unit not stated in the document
0.5 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Calcite dissolution capacity -2,6
Unit not stated in the document
5 mg/l CaCO3 Single value
Chloride 49,5
Unit not stated in the document
250 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Colour <0,10
below limit of quantification
Unit not stated in the document
0.5 m⁻¹ Mean · Binsheimer Feld, Mittelwerte 2025
Conductivity (25 °C) 589
Unit not stated in the document
2,790 µS/cm Mean · Binsheimer Feld, Mittelwerte 2025
Iron <0,0005
below limit of quantification
Unit not stated in the document
0.2 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Manganese <0,0005
below limit of quantification
Unit not stated in the document
50 µg/l Mean · Binsheimer Feld, Mittelwerte 2025
Sodium 29,1
Unit not stated in the document
200 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Sulphate 52,5
Unit not stated in the document
250 mg/l Mean · Binsheimer Feld, Mittelwerte 2025
Taste unauffällig für den Verbraucher annehmbar Single value · Rohrleitungsnetz KWW GmbH, 2025
Temperature 14,1 Mean · Binsheimer Feld, Mittelwerte 2025
Threshold odour number (TON) -
not determined
Single value
Total organic carbon (TOC) 1,1 ohne anormale Veränderung Single value
Turbidity <0,10
below limit of quantification
Unit not stated in the document
1 NTU Mean · Binsheimer Feld, Mittelwerte 2025

Further parameters (8)

Further parameters – rheinberg gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3,24 Mean · Binsheimer Feld, Mittelwerte 2025
Base capacity to pH 8.2 0,23 Mean · Binsheimer Feld, Mittelwerte 2025
Calcium 71,2 Mean · Binsheimer Feld, Mittelwerte 2025
Hardness range (WRMG) mittel Mean · Binsheimer Feld, Mittelwerte 2025
Magnesium 10,5 Mean · Binsheimer Feld, Mittelwerte 2025
Potassium 3,68 Mean · Binsheimer Feld, Mittelwerte 2025
Sum of alkaline earth metals 2,14 Mean · Binsheimer Feld, Mittelwerte 2025
Total hardness 12,6 Mean · Binsheimer Feld, Mittelwerte 2025

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.kww.nrw/media/trinkwasseranalyse_2025_1.pdf · 2025 · retrieved on 11/07/2026

Postcodes in this zone: 47495

Show 2 more supply zones

Wasserversorger (offizieller Durchschnittsmesswert)

Stadtwerke Wesel (Wasserwerk Flüren)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.2 °dH
Hardness range medium
Key values Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22.1 mg/l 50 mg/l
44 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Lead < 0.001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Sodium 16.1 mg/l 200 mg/l
8 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Copper < 0.05 mg/l
below limit of quantification
2 mg/l
< 3 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Lead < 0.001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Nickel < 0.002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Nitrate 22.1 mg/l 50 mg/l
44 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Sodium 16.1 mg/l 200 mg/l
8 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)

Further parameters (1)

Further parameters – Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 13.2 °dH Mean · Wasserversorger (offizieller Durchschnittsmesswert)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://xn--wasserqualitt-mfb.ivario.com/wesel.php · retrieved on 13/07/2026

Postcodes in this zone: 47495

Werksausgang - Trinkwasser nach Desinfektion

Wasserverbund Niederrhein GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12.7 °dH
Hardness range mittel
Key values Werksausgang - Trinkwasser nach Desinfektion
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,5 mg/l 50 mg/l
19 %
Mean
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Sulphate 52,9 mg/l 250 mg/l
21 %
Mean
Sodium 29,2 mg/l 200 mg/l
15 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (42 — most recent value per parameter)

Chemical parameters (23)

Chemical parameters – Werksausgang - Trinkwasser nach Desinfektion
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/l
below limit of quantification
3 µg/l
< 3 % *
Mean
Acrylamide < 0,03 µg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Antimony < 0,0010 mg/l
below limit of quantification
5 µg/l
< 20 % *
Mean
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Benzene < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Benzo(a)pyrene < 0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Mean
Boron 0,037 mg/l 1 mg/l
4 %
Mean
Bromate < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Mean
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Mean
Chromium < 0,001 mg/l
below limit of quantification
25 µg/l
< 4 % *
Mean
Copper < 0,0020 mg/l
below limit of quantification
2 mg/l
< 0.1 % *
Mean
Cyanide < 0,0050 mg/l
below limit of quantification
50 µg/l
< 10 % *
Mean
Epichlorohydrin < 0,03 µg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Fluoride 0,12 mg/l 1.5 mg/l
8 %
Mean
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Mean
Nitrate 9,5 mg/l 50 mg/l
19 %
Mean
Nitrite < 0,002 mg/l
below limit of quantification
0.5 mg/l
< 0.4 % *
Mean
Polycyclic aromatic hydrocarbons < 0,005 µg/l
below limit of quantification
0.1 µg/l
< 5 % *
Mean
Selenium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Uranium 0,725 µg/l 10 µg/l
7 %
Mean
Vinyl chloride < 0,05 µg/l
below limit of quantification
0.5 µg/l
< 10 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (12)

Indicator parameters – Werksausgang - Trinkwasser nach Desinfektion
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean
Ammonium < 0,2 mg/l
below limit of quantification
0.5 mg/l
< 40 % *
Mean
Chloride 50,4 mg/l 250 mg/l
20 %
Mean
Colour - 1/m
not determined
0.5 m⁻¹ Mean
Conductivity (25 °C) 592 µS/cm 2,790 µS/cm Mean
Iron < 0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean
Manganese < 0,010 mg/l
below limit of quantification
50 µg/l
< 20 % *
Mean
Sodium 29,2 mg/l 200 mg/l
15 %
Mean
Sulphate 52,9 mg/l 250 mg/l
21 %
Mean
Temperature 13,9 °C Mean
Total organic carbon (TOC) 0,64 mg/l ohne anormale Veränderung Mean
Turbidity < 0,10 NTU
below limit of quantification
1 NTU Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – Werksausgang - Trinkwasser nach Desinfektion
Parameter Value Parametric value Share of the parametric value Reference
Calcium 72,3 mg/l Mean
Hardness range (WRMG) mittel Single value
Magnesium 10,5 mg/l Mean
Oxygen 4,9 mg/l Mean
Phosphate 0,11 mg/l Mean
Potassium 3,6 mg/l Mean
Total hardness 12,7 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 47495

Frequently asked questions about drinking water in Rheinberg

How hard is the water in Rheinberg?
KWW GmbH - Kommunales Wasserwerk publishes the hardness range mittel for the supply zone rheinberg gesamt. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Rheinberg?
KWW GmbH - Kommunales Wasserwerk. The values shown here come from the supply zone rheinberg gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.