How hard is the water in Remigen?

Wasserversorgung Remigen publishes a total hardness of 29 °fH for the supply zone Wasserversorgung Remigen — that corresponds to 16.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Remigen?

Wasserversorgung Remigen publishes a nitrate value of 28 mg/l for the supply zone Wasserversorgung Remigen. The statutory parametric value is 40 mg/l; the measured value represents 70 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.

Who supplies the drinking water in Remigen?

Wasserversorgung Remigen. The values shown here come from the supply zone Wasserversorgung Remigen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Remigen

One supply zone, water supplier: Wasserversorgung Remigen.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Wasserversorgung Remigen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

16.2 °dH

Hardness range hard

Key values Wasserversorgung Remigen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	28 mg/l	40 mg/l	70 %	Mean · Wasserversorgung Remigen
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Wasserversorgung Remigen

Show all recorded parameters (8 — most recent value per parameter)

Microbiology (3)

Microbiology – Wasserversorgung Remigen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	nn not detectable Unit not stated in the document	300 1/ml	—	Mean · Wasserversorgung Remigen
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Wasserversorgung Remigen
Intestinal enterococci	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Wasserversorgung Remigen

Chemical parameters (1)

Chemical parameters – Wasserversorgung Remigen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	28 mg/l	40 mg/l	70 %	Mean · Wasserversorgung Remigen

Metabolites (2)

Metabolites – Wasserversorgung Remigen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Chlorothalonil metabolite R417888	< 0.02 µg/l below limit of quantification	0.1 µg/l	< 20 % *	Mean · Wasserversorgung Remigen
Chlorothalonil metabolite R471811	< 0.034 µg/l below limit of quantification	0.1 µg/l	< 34 % *	Mean · Wasserversorgung Remigen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Wasserversorgung Remigen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Temperature	17 °C	—	—	Mean · Wasserversorgung Remigen

Further parameters (1)

Further parameters – Wasserversorgung Remigen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Total hardness	29 °fH	—	—	Mean · Wasserversorgung Remigen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1542/wasserversorgung-remigen/3487/wasserversorgung-remigen · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 5236

Frequently asked questions about drinking water in Remigen

How hard is the water in Remigen?: Wasserversorgung Remigen publishes a total hardness of 29 °fH for the supply zone Wasserversorgung Remigen — that corresponds to 16.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Remigen?: Wasserversorgung Remigen publishes a nitrate value of 28 mg/l for the supply zone Wasserversorgung Remigen. The statutory parametric value is 40 mg/l; the measured value represents 70 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Remigen?: Wasserversorgung Remigen. The values shown here come from the supply zone Wasserversorgung Remigen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.