Drinking water in Rebstein
One supply zone, water supplier: Wasserversorgung Rebstein.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Rebstein
Wasserversorgung RebsteinAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 6.5 mg/l | 40 mg/l | 16 % | Mean · Rebstein |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Rebstein |
| Sulphate | 15 mg/l | — | — | Mean · Rebstein |
Show all recorded parameters (13 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 6 KBE/ml | 300 1/ml | — | Mean · Rebstein |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Rebstein |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Rebstein |
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 6.5 mg/l | 40 mg/l | 16 % | Mean · Rebstein |
Indicator parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 9.25 mg/l | — | — | Mean · Rebstein |
| Conductivity (25 °C) | 521 µS/cm | — | — | Mean · Rebstein |
| pH | 7.28 | — | — | Mean · Rebstein |
| Sulphate | 15 mg/l | — | — | Mean · Rebstein |
| Temperature | 11.7 °C | — | — | Mean · Rebstein |
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 84.7 mg/l | — | — | Mean · Rebstein |
| Dissolved organic carbon (DOC) | 0.99 mg/l | — | — | Mean · Rebstein |
| Magnesium | 20.5 mg/l | — | — | Mean · Rebstein |
| Total hardness | 29.7 °fH | — | — | Mean · Rebstein |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 9445
Frequently asked questions about drinking water in Rebstein
- How hard is the water in Rebstein?
- Wasserversorgung Rebstein publishes a total hardness of 29.7 °fH for the supply zone Rebstein — that corresponds to 16.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
- How much nitrate is in the drinking water in Rebstein?
- Wasserversorgung Rebstein publishes a nitrate value of 6.5 mg/l for the supply zone Rebstein. The statutory parametric value is 40 mg/l; the measured value represents 16 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
- Who supplies the drinking water in Rebstein?
- Wasserversorgung Rebstein. The values shown here come from the supply zone Rebstein and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.