Drinking water in Perl
2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Gemeindewasserwerk Perl - Probenahmestelle: Sehndorf, Vereinhaus / Toilette, Z WB
Gemeindewasserwerk PerlAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 16/05/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
Water hardness
33 °dH
Hardness range hard
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 21,5 mg/l | 50 mg/l | 43 % | Single value |
| Lead | <0,30 µg/l below limit of quantification | 10 µg/l | < 3 % * | Single value |
| Sulphate | 252,8 mg/l | 250 mg/l | 101 % above the parametric value | Single value |
| Sodium | 9,8 mg/l | 200 mg/l | 5 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.
Show all recorded parameters (112 — most recent value per parameter)
Chemical parameters (88)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,2 µg/l below limit of quantification | 3 µg/l | < 7 % * | Single value |
| Alachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ametryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Antimony | <0,3 µg/l below limit of quantification | 5 µg/l | < 6 % * | Single value |
| Arsenic | <0,6 µg/l below limit of quantification | 10 µg/l | < 6 % * | Single value |
| Atrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Benzene | <0,2 µg/l below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Benzo(a)pyrene | <0,001 µg/l below limit of quantification | 10 ng/l | < 10 % * | Single value |
| Benzo(b)fluoranthene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Bifenox | <0,03 µg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0,10 µg/l below limit of quantification | 2.5 µg/l | < 4 % * | Single value |
| Boron | <0,05 mg/l below limit of quantification | 1 mg/l | < 5 % * | Single value |
| Boscalid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromate | <0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Bromodichloromethane | <0,2 µg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,20 µg/l below limit of quantification | 3 µg/l | < 7 % * | Single value |
| Carbetamide | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chlorfenvinphos | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chloridazon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chlorotoluron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chromium | <0,3 µg/l below limit of quantification | 25 µg/l | < 1 % * | Single value |
| Clopyralid | <0,04 µg/l below limit of quantification | — | — | Single value |
| Copper | <0,002 mg/l below limit of quantification | 2 mg/l | < 0.1 % * | Single value |
| Cyanazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Desethylatrazine | <0,01 µg/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | <0,01 µg/l below limit of quantification | — | — | Single value |
| Desmetryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dibromochloromethane | <0,2 µg/l below limit of quantification | — | — | Single value |
| Diflufenican | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimefuron | <0,03 µg/l below limit of quantification | — | — | Single value |
| Dimethachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethenamid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Epoxiconazole | <0,025 µg/l below limit of quantification | — | — | Single value |
| Fenuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Flufenacet | <0,02 µg/l below limit of quantification | — | — | Single value |
| Fluoranthene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,19 mg/l | 1.5 mg/l | 13 % | Single value |
| Flurtamone | <0,02 µg/l below limit of quantification | — | — | Single value |
| Fluxapyroxad | <0,02 µg/l below limit of quantification | — | — | Single value |
| Hexazinone | <0,02 µg/l below limit of quantification | — | — | Single value |
| Imidacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Indeno(1,2,3-cd)pyrene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Isoproturon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Lead | <0,30 µg/l below limit of quantification | 10 µg/l | < 3 % * | Single value |
| Linuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mercury | <0,10 µg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metalaxyl | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metamitron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor acid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor sulfonic acid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Methabenzthiazuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metobromuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metolachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metoxuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metribuzin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Monolinuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Monuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Napropamide | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nickel | 1,0 µg/l | 20 µg/l | 5 % | Single value |
| Nicosulfuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nitrate | 21,5 mg/l | 50 mg/l | 43 % | Single value |
| Nitrite | <0,005 mg/l below limit of quantification | 0.5 mg/l | < 1 % * | Single value |
| Pendimethalin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Prometryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Propazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Propiconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Prosulfocarb | <0,02 µg/l below limit of quantification | — | — | Single value |
| Quinmerac | <0,04 µg/l below limit of quantification | — | — | Single value |
| Sebuthylazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Selenium | <0,60 µg/l below limit of quantification | 10 µg/l | < 6 % * | Single value |
| Simazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tebuconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Terbutryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Thiacloprid | <0,05 µg/l below limit of quantification | — | — | Single value |
| Triadimenol | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tribromomethane (bromoform) | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | 0,0 µg/l | 50 µg/l | 0 % | Single value |
| Uranium | 1,90 µg/l | 10 µg/l | 19 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Desphenyl-chloridazon | 0,12 µg/l | — | — | Single value |
| Dimethylsulfamide (DMS) | <0,02 µg/l below limit of quantification | — | — | Single value |
Indicator parameters (15)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | <0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Chloride | 22,9 mg/l | 250 mg/l | 9 % | Single value |
| Colony count 22 °C | 0 /ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 /ml | ohne anormale Veränderung | — | Single value |
| Colour | <0,10 1/m below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 913 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | <0,002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Single value |
| Odour | nein | für den Verbraucher annehmbar | — | Single value |
| Oxidisability | <0,50 mg/l O2 below limit of quantification | 5 mg/l O2 | — | Single value |
| Sodium | 9,8 mg/l | 200 mg/l | 5 % | Single value |
| Sulphate | 252,8 mg/l | 250 mg/l | 101 % above the parametric value | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Turbidity | 0,36 FNU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 6,08 mmol/l | — | — | Single value |
| Calcium | 161,7 mg/l | — | — | Single value |
| Magnesium | 44,8 mg/l | — | — | Single value |
| Potassium | 2,9 mg/l | — | — | Single value |
| Sum of anion equivalents | 12,28 mmol/l | — | — | Single value |
| Sum of cation equivalents | 12,26 mmol/l | — | — | Single value |
| Total hardness | 33 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://perl.saarland/wasserversorgung.html?file=files/Rathaus/wasserversorgung/Analyse_Bohrung_5_2024.pdf&cid=6370 · 2. Ausfertigung vom 10.06.2024, Vorgängerversion 1 · Probenahme 16.05.2024 · retrieved on 18/08/2026
Postcodes in this zone: 66706
Show 1 more supply zone
Kesslingen, Friedhof / Zapfhahn
Gemeindewasserwerk PerlAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 16/05/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
Water hardness
28 °dH
Hardness range hard
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 29,3 mg/l | 50 mg/l | 59 % | Single value |
| Lead | <0,30 µg/l below limit of quantification | 10 µg/l | < 3 % * | Single value |
| Sulphate | 172,9 mg/l | 250 mg/l | 69 % | Single value |
| Sodium | 6,6 mg/l | 200 mg/l | 3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (113 — most recent value per parameter)
Chemical parameters (88)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,2 µg/l below limit of quantification | 3 µg/l | < 7 % * | Single value |
| Alachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ametryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Antimony | <0,3 µg/l below limit of quantification | 5 µg/l | < 6 % * | Single value |
| Arsenic | <0,6 µg/l below limit of quantification | 10 µg/l | < 6 % * | Single value |
| Atrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Benzene | <0,2 µg/l below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Benzo(a)pyrene | <0,001 µg/l below limit of quantification | 10 ng/l | < 10 % * | Single value |
| Benzo(b)fluoranthene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Bifenox | <0,03 µg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0,10 µg/l below limit of quantification | 2.5 µg/l | < 4 % * | Single value |
| Boron | <0,05 mg/l below limit of quantification | 1 mg/l | < 5 % * | Single value |
| Boscalid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromate | <0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Bromodichloromethane | <0,2 µg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,20 µg/l below limit of quantification | 3 µg/l | < 7 % * | Single value |
| Carbetamide | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chlorfenvinphos | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chloridazon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chlorotoluron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chromium | <0,3 µg/l below limit of quantification | 25 µg/l | < 1 % * | Single value |
| Clopyralid | <0,04 µg/l below limit of quantification | — | — | Single value |
| Copper | 0,005 mg/l | 2 mg/l | 0.3 % | Single value |
| Cyanazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Desethylatrazine | <0,01 µg/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | <0,01 µg/l below limit of quantification | — | — | Single value |
| Desmetryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dibromochloromethane | <0,2 µg/l below limit of quantification | — | — | Single value |
| Diflufenican | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimefuron | <0,03 µg/l below limit of quantification | — | — | Single value |
| Dimethachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethenamid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Epoxiconazole | <0,025 µg/l below limit of quantification | — | — | Single value |
| Fenuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Flufenacet | <0,02 µg/l below limit of quantification | — | — | Single value |
| Fluoranthene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,16 mg/l | 1.5 mg/l | 11 % | Single value |
| Flurtamone | <0,02 µg/l below limit of quantification | — | — | Single value |
| Fluxapyroxad | <0,02 µg/l below limit of quantification | — | — | Single value |
| Hexazinone | <0,02 µg/l below limit of quantification | — | — | Single value |
| Imidacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Indeno(1,2,3-cd)pyrene | <0,001 µg/l below limit of quantification | — | — | Single value |
| Isoproturon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Lead | <0,30 µg/l below limit of quantification | 10 µg/l | < 3 % * | Single value |
| Linuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mercury | <0,10 µg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metalaxyl | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metamitron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor acid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor sulfonic acid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Methabenzthiazuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metobromuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metolachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metoxuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metribuzin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Monolinuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Monuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Napropamide | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nickel | 0,8 µg/l | 20 µg/l | 4 % | Single value |
| Nicosulfuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nitrate | 29,3 mg/l | 50 mg/l | 59 % | Single value |
| Nitrite | <0,005 mg/l below limit of quantification | 0.5 mg/l | < 1 % * | Single value |
| Pendimethalin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Prometryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Propazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Propiconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Prosulfocarb | <0,02 µg/l below limit of quantification | — | — | Single value |
| Quinmerac | <0,04 µg/l below limit of quantification | — | — | Single value |
| Sebuthylazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Selenium | <0,60 µg/l below limit of quantification | 10 µg/l | < 6 % * | Single value |
| Simazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tebuconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Terbutryn | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Thiacloprid | <0,05 µg/l below limit of quantification | — | — | Single value |
| Triadimenol | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tribromomethane (bromoform) | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | 0,0 µg/l | 50 µg/l | 0 % | Single value |
| Uranium | 1,80 µg/l | 10 µg/l | 18 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Desphenyl-chloridazon | 0,17 µg/l | — | — | Single value |
| Dimethylsulfamide (DMS) | <0,02 µg/l below limit of quantification | — | — | Single value |
Indicator parameters (15)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | <0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Chloride | 20,7 mg/l | 250 mg/l | 8 % | Single value |
| Colony count 22 °C | 0 /ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 /ml | ohne anormale Veränderung | — | Single value |
| Colour | <0,10 1/m below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 767 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | <0,002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Single value |
| Odour | nein | für den Verbraucher annehmbar | — | Single value |
| Oxidisability | <0,50 mg/l O2 below limit of quantification | 5 mg/l O2 | — | Single value |
| Sodium | 6,6 mg/l | 200 mg/l | 3 % | Single value |
| Sulphate | 172,9 mg/l | 250 mg/l | 69 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Turbidity | 0,36 FNU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,90 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | 0,42 mmol/l | — | — | Single value |
| Calcium | 116,5 mg/l | — | — | Single value |
| Magnesium | 51,1 mg/l | — | — | Single value |
| Potassium | 3,2 mg/l | — | — | Single value |
| Sum of anion equivalents | 10,50 mmol/l | — | — | Single value |
| Sum of cation equivalents | 10,39 mmol/l | — | — | Single value |
| Total hardness | 28 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://perl.saarland/wasserversorgung.html?file=files/Rathaus/wasserversorgung/Analyse_Bohrung_3_2024.pdf&cid=6368 · 2. Ausfertigung vom 10.06.2024, Vorgängerversion 1 · Probenahme 16.05.2024 · retrieved on 18/08/2026
Postcodes in this zone: 66706
Frequently asked questions about drinking water in Perl
- How hard is the water in Perl?
- Gemeindewasserwerk Perl publishes a total hardness of 33 °dH for the supply zone Gemeindewasserwerk Perl - Probenahmestelle: Sehndorf, Vereinhaus / Toilette, Z WB (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2. Ausfertigung vom 10.06.2024, Vorgängerversion 1, retrieved on 18/08/2026.
- How much nitrate is in the drinking water in Perl?
- Gemeindewasserwerk Perl publishes a nitrate value of 21,5 mg/l for the supply zone Gemeindewasserwerk Perl - Probenahmestelle: Sehndorf, Vereinhaus / Toilette, Z WB. The statutory parametric value is 50 mg/l; the measured value represents 43 % of the parametric value. Basis: 2. Ausfertigung vom 10.06.2024, Vorgängerversion 1, retrieved on 18/08/2026.
- Who supplies the drinking water in Perl?
- Gemeindewasserwerk Perl. The values shown here come from the supply zone Gemeindewasserwerk Perl - Probenahmestelle: Sehndorf, Vereinhaus / Toilette, Z WB and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.