How hard is the water in Oderberg u.a.?

Eberswalde publishes the hardness range 11,1 for the supply zone Eberswalde 1 (Stadtsee). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.

How much nitrate is in the drinking water in Oderberg u.a.?

Eberswalde publishes a nitrate value of 1,1 mg/l for the supply zone Eberswalde 1 (Stadtsee). The statutory parametric value is 50 mg/l; the measured value represents 2 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.

Who supplies the drinking water in Oderberg u.a.?

Eberswalde. The values shown here come from the supply zone Eberswalde 1 (Stadtsee) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Oderberg u.a.

12 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Eberswalde 1 (Stadtsee)

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

Hardness range 11,1

Key values Eberswalde 1 (Stadtsee)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	1,1 mg/l	50 mg/l	2 %	Single value
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Single value
Sulphate	5,8 mg/l	250 mg/l	2 %	Single value
Sodium	14,1 mg/l	200 mg/l	7 %	Single value

Show all recorded parameters (62 — most recent value per parameter)

Microbiology (2)

Microbiology – Eberswalde 1 (Stadtsee)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Single value
Intestinal enterococci	0 KBE /100 ml	0/100 ml	—	Single value

Chemical parameters (35)

Chemical parameters – Eberswalde 1 (Stadtsee)
Parameter	Value	Parametric value	Share of the parametric value	Reference
1,2-dichloroethane	< 0,0003 mg/l below limit of quantification	3 µg/l	< 10 % *	Single value
1,2-Dichloropropane	< 0,0001 mg/l below limit of quantification	—	—	Single value
AMPA	< 0,00005 mg/l below limit of quantification	—	—	Single value
Atrazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Bentazone	< 0,00005 mg/l below limit of quantification	—	—	Single value
Benzene	< 0,0005 mg/l below limit of quantification	1 µg/l	< 50 % *	Single value
Bisphenol A	< 0,0001 mg/l below limit of quantification	2.5 µg/l	< 4 % *	Single value
Boron	0,049 mg/l	1 mg/l	5 %	Single value
Bromacil	< 0,00005 mg/l below limit of quantification	—	—	Single value
Bromate	< 0,003 mg/l below limit of quantification	10 µg/l	< 30 % *	Single value
Chromium	0,0005 mg/l	25 µg/l	2 %	Single value
Copper	< 0,001 mg/l below limit of quantification	2 mg/l	< < 0.1 % *	Single value
Cyanide	< 0,005 mg/l below limit of quantification	50 µg/l	< 10 % *	Single value
Desethylatrazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Desisopropylatrazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Diuron	< 0,00005 mg/l below limit of quantification	—	—	Single value
Ethidimuron	< 0,00005 mg/l below limit of quantification	—	—	Single value
Fluoride	0,30 mg/l	1.5 mg/l	20 %	Single value
Glyphosate	< 0,00005 mg/l below limit of quantification	—	—	Single value
Hexazinone	< 0,00005 mg/l below limit of quantification	—	—	Single value
MCPA	< 0,00005 mg/l below limit of quantification	—	—	Single value
Mecoprop	< 0,00005 mg/l below limit of quantification	—	—	Single value
Mercury	< 0,0001 mg/l below limit of quantification	1 µg/l	< 10 % *	Single value
Metalaxyl	< 0,00005 mg/l below limit of quantification	—	—	Single value
Metazachlor	< 0,00005 mg/l below limit of quantification	—	—	Single value
Metazachlor acid	< 0,00005 mg/l below limit of quantification	—	—	Single value
Metolachlor	< 0,00005 mg/l below limit of quantification	—	—	Single value
Nitrate	1,1 mg/l	50 mg/l	2 %	Single value
Pesticides — Total	< 0,00005 mg/l below limit of quantification	0.5 µg/l	< 10 % *	Single value
Selenium	< 0,001 mg/l below limit of quantification	10 µg/l	< 10 % *	Single value
Simazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Terbuthylazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Tetrachloroethene	< 0,0001 mg/l below limit of quantification	—	—	Single value
Trichloroethene	< 0,0001 mg/l below limit of quantification	—	—	Single value
Uranium	< 0,0002 mg/l below limit of quantification	10 µg/l	< 2 % *	Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (19)

Indicator parameters – Eberswalde 1 (Stadtsee)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aluminium	< 0,005 mg/l below limit of quantification	0.2 mg/l	< 3 % *	Single value
Ammonium	< 0,05 mg/l below limit of quantification	0.5 mg/l	< 10 % *	Single value
Calcite dissolution capacity	-0,7 1119 CaC0 3/i	5 mg/l CaCO3	—	Single value
Chloride	12 mg/l	250 mg/l	5 %	Single value
Coliform bacteria	0 KBE/100ml	0/100 ml	—	Single value
Colony count 22 °C	1 KBE/1 ml	ohne anormale Veränderung	—	Single value
Colony count 36 °C	0 KBE/1 ml	ohne anormale Veränderung	—	Single value
Colour	0,2 1/m	0.5 m⁻¹	—	Single value
Conductivity (25 °C)	440 µS/cm	2,790 µS/cm	—	Single value
Iron	< 0,005 mg/l below limit of quantification	0.2 mg/l	< 3 % *	Single value
Manganese	< 0,002 mg/l below limit of quantification	50 µg/l	< 4 % *	Single value
Odour	1 bei 23°C	für den Verbraucher annehmbar	—	Single value
pH	7,42	6,5–9,5	—	Single value
Sodium	14,1 mg/l	200 mg/l	7 %	Single value
Sulphate	5,8 mg/l	250 mg/l	2 %	Single value
Taste	ohne	für den Verbraucher annehmbar	—	Single value
Temperature	12,5 °C	—	—	Single value
Total organic carbon (TOC)	2,8 mg/l	ohne anormale Veränderung	—	Single value
Turbidity	0,03 NTU	1 NTU	—	Single value

Further parameters (6)

Further parameters – Eberswalde 1 (Stadtsee)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Base capacity to pH 8.2	0,52 mmol/l	—	—	Single value
Carbonate hardness	12,3 0 dH	—	—	Single value
Hardness range (WRMG)	1,98 mmol/l	—	—	Single value
Magnesium	9,51 mg/l	—	—	Single value
Potassium	1,84 mg/l	—	—	Single value
Saturation index	0,011	—	—	Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.zwa-eberswalde.de/images/Daten_der_Wasserwerke/Stadtsee/Parameter_Stadtsee.pdf · Prüfzeitraum 01.09.2025 - 16.09.2025 (Probennahme 01.09.2025) · retrieved on 11/07/2026

Postcodes in this zone: 16248

Show 11 more supply zones

Eberswalde 3 (Finow)

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

Hardness range 12,9

Key values Eberswalde 3 (Finow)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	2,4 mg/l	50 mg/l	5 %	Single value
Escherichia coli (E. coli)	0 KBE/100 ml	0/100 ml	—	Single value
Sulphate	15 mg/l	250 mg/l	6 %	Single value
Sodium	25,6 mg/l	200 mg/l	13 %	Single value

Show all recorded parameters (65 — most recent value per parameter)

Microbiology (2)

Microbiology – Eberswalde 3 (Finow)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 KBE/100 ml	0/100 ml	—	Single value
Intestinal enterococci	0 KBE/100 ml	0/100 ml	—	Single value

Chemical parameters (36)

Chemical parameters – Eberswalde 3 (Finow)
Parameter	Value	Parametric value	Share of the parametric value	Reference
1,2-dichloroethane	<0,0003 mg/l below limit of quantification	3 µg/l	< 10 % *	Single value
1,2-Dichloropropane	<0,0001 mg/l below limit of quantification	—	—	Single value
AMPA	<0,00005 mg/l below limit of quantification	—	—	Single value
Atrazine	<0,00005 mg/l below limit of quantification	—	—	Single value
Bentazone	<0,00005 mg/l below limit of quantification	—	—	Single value
Benzene	<0,0005 mg/l below limit of quantification	1 µg/l	< 50 % *	Single value
Bisphenol A	<0,0001 mg/l below limit of quantification	2.5 µg/l	< 4 % *	Single value
Boron	0,063 mg/l	1 mg/l	6 %	Single value
Bromacil	<0,00005 mg/l below limit of quantification	—	—	Single value
Bromate	<0,003 mg/l below limit of quantification	10 µg/l	< 30 % *	Single value
Chromium	<0,0005 mg/l below limit of quantification	25 µg/l	< 2 % *	Single value
Copper	0,002 mg/l	2 mg/l	0.1 %	Single value
Cyanide	<0,005 mg/l below limit of quantification	50 µg/l	< 10 % *	Single value
Desethylatrazine	<0,00005 mg/l below limit of quantification	—	—	Single value
Desisopropylatrazine	<0,00005 mg/l below limit of quantification	—	—	Single value
Diuron	<0,00005 mg/l below limit of quantification	—	—	Single value
Ethidimuron	<0,00005 mg/l below limit of quantification	—	—	Single value
Fluoride	0,22 mg/l	1.5 mg/l	15 %	Single value
Glyphosate	<0,00005 mg/l below limit of quantification	—	—	Single value
Hexazinone	<0,00005 mg/l below limit of quantification	—	—	Single value
Isoproturon	<0,00005 mg/l below limit of quantification	—	—	Single value
MCPA	<0,00005 mg/l below limit of quantification	—	—	Single value
Mecoprop	<0,00005 mg/l below limit of quantification	—	—	Single value
Mercury	<0,0001 mg/l below limit of quantification	1 µg/l	< 10 % *	Single value
Metalaxyl	<0,00005 mg/l below limit of quantification	—	—	Single value
Metazachlor	<0,00005 mg/l below limit of quantification	—	—	Single value
Metazachlor acid	<0,00005 mg/l below limit of quantification	—	—	Single value
Metolachlor	<0,00005 mg/l below limit of quantification	—	—	Single value
Nitrate	2,4 mg/l	50 mg/l	5 %	Single value
Pesticides — Total	<0,00005 mg/l below limit of quantification	0.5 µg/l	< 10 % *	Single value
Selenium	<0,001 mg/l below limit of quantification	10 µg/l	< 10 % *	Single value
Simazine	<0,00005 mg/l below limit of quantification	—	—	Single value
Terbuthylazine	<0,00005 mg/l below limit of quantification	—	—	Single value
Tetrachloroethene	<0,0001 mg/l below limit of quantification	—	—	Single value
Trichloroethene	<0,0001 mg/l below limit of quantification	—	—	Single value
Uranium	<0,0002 mg/l below limit of quantification	10 µg/l	< 2 % *	Single value

Indicator parameters (19)

Indicator parameters – Eberswalde 3 (Finow)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aluminium	<0,005 mg/l below limit of quantification	0.2 mg/l	< 3 % *	Single value
Ammonium	<0,05 mg/l below limit of quantification	0.5 mg/l	< 10 % *	Single value
Calcite dissolution capacity	-5,7 mg CaCO3/l	5 mg/l CaCO3	—	Single value
Chloride	25 mg/l	250 mg/l	10 %	Single value
Coliform bacteria	0 KBE/100ml	0/100 ml	—	Single value
Colony count 22 °C	1 KBE/1 ml	ohne anormale Veränderung	—	Single value
Colony count 36 °C	1 KBE/1 ml	ohne anormale Veränderung	—	Single value
Colour	0,3 1/m	0.5 m⁻¹	—	Single value
Conductivity (25 °C)	517 µS/cm	2,790 µS/cm	—	Single value
Iron	<0,033 mg/l below limit of quantification	0.2 mg/l	< 17 % *	Single value
Manganese	0,003 mg/l	50 µg/l	6 %	Single value
Odour	1 bei 23°C	für den Verbraucher annehmbar	—	Single value
pH	7,43	6,5–9,5	—	Single value
Sodium	25,6 mg/l	200 mg/l	13 %	Single value
Sulphate	15 mg/l	250 mg/l	6 %	Single value
Taste	ohne	für den Verbraucher annehmbar	—	Single value
Temperature	11,8 °C	—	—	Single value
Total organic carbon (TOC)	3,4 mg/l	ohne anormale Veränderung	—	Single value
Turbidity	0,05 NTU	1 NTU	—	Single value

Further parameters (8)

Further parameters – Eberswalde 3 (Finow)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Acid capacity to pH 4.3	4,82 mmol/l	—	—	Single value
Base capacity to pH 8.2	0,50 mmol/l	—	—	Single value
Carbonate hardness	13,5 °dH	—	—	Single value
Hardness range (WRMG)	2,30 mmol/l	—	—	Single value
Magnesium	12,1 mg/l	—	—	Single value
Phosphate	<0,1 mg/l below limit of quantification	—	—	Single value
Potassium	2,39 mg/l	—	—	Single value
Saturation index	0,082	—	—	Single value

Source: https://www.zwa-eberswalde.de/images/Daten_der_Wasserwerke/Finow/Parameter_Finow.pdf · Prüfzeitraum 03.11.2025 - 13.11.2025 · retrieved on 11/07/2026

Postcodes in this zone: 16248

Joachimsthal

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

Hardness range 5,2

Key values Joachimsthal
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	0,58 mg/l	50 mg/l	1 %	Single value
Escherichia coli (E. coli)	0 KBE/ 100 ml	0/100 ml	—	Single value
Sulphate	25 mg/1	250 mg/l	—	Single value
Sodium	5,65 mg/l	200 mg/l	3 %	Single value

Show all recorded parameters (65 — most recent value per parameter)

Microbiology (2)

Microbiology – Joachimsthal
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 KBE/ 100 ml	0/100 ml	—	Single value
Intestinal enterococci	0 KBE/100 ml	0/100 ml	—	Single value

Chemical parameters (36)

Chemical parameters – Joachimsthal
Parameter	Value	Parametric value	Share of the parametric value	Reference
1,2-dichloroethane	< 0,0003 mg/l below limit of quantification	3 µg/l	< 10 % *	Single value
1,2-Dichloropropane	< 0,0001 mg/l below limit of quantification	—	—	Single value
AMPA	< 0,00005 mg/l below limit of quantification	—	—	Single value
Atrazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Bentazone	< 0,00005 mg/l below limit of quantification	—	—	Single value
Benzene	< 0,0005 mg/l below limit of quantification	1 µg/l	< 50 % *	Single value
Bisphenol A	< 0,0001 mg/l below limit of quantification	2.5 µg/l	< 4 % *	Single value
Boron	0,011 mg/l	1 mg/l	1 %	Single value
Bromacil	< 0,00005 mg/l below limit of quantification	—	—	Single value
Bromate	< 0,003 mg/l below limit of quantification	10 µg/l	< 30 % *	Single value
Chromium	< 0,0005 mgtl below limit of quantification	25 µg/l	—	Single value
Copper	< 0,002 mg/l below limit of quantification	2 mg/l	< 0.1 % *	Single value
Cyanide	< 0,005 mg/l below limit of quantification	50 µg/l	< 10 % *	Single value
Desethylatrazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Desisopropylatrazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Diuron	< 0,00005 mg/l below limit of quantification	—	—	Single value
Ethidimuron	< 0,00005 mg/l below limit of quantification	—	—	Single value
Fluoride	0,11 mg/1	1.5 mg/l	—	Single value
Glyphosate	< 0,00005 mg/l below limit of quantification	—	—	Single value
Hexazinone	< 0,00005 mg/l below limit of quantification	—	—	Single value
Isoproturon	< 0,00005 mg/l below limit of quantification	—	—	Single value
MCPA	< 0,00005 mg/l below limit of quantification	—	—	Single value
Mecoprop	< 0,00005 mg/l below limit of quantification	—	—	Single value
Mercury	< 0,0001 mg/l below limit of quantification	1 µg/l	< 10 % *	Single value
Metalaxyl	< 0,00005 mg/l below limit of quantification	—	—	Single value
Metazachlor	< 0,00005 mg/1 below limit of quantification	—	—	Single value
Metazachlor acid	< 0,00005 mg/l below limit of quantification	—	—	Single value
Metolachlor	< 0,00005 mg/l below limit of quantification	—	—	Single value
Nitrate	0,58 mg/l	50 mg/l	1 %	Single value
Pesticides — Total	< 0,00005 mg/l below limit of quantification	0.5 µg/l	< 10 % *	Single value
Selenium	< 0,001 mg/l below limit of quantification	10 µg/l	< 10 % *	Single value
Simazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Terbuthylazine	< 0,00005 mg/l below limit of quantification	—	—	Single value
Tetrachloroethene	< 0,0001 mg/l below limit of quantification	—	—	Single value
Trichloroethene	< 0,0001 mg/l below limit of quantification	—	—	Single value
Uranium	< 0,0002 mg/l below limit of quantification	10 µg/l	< 2 % *	Single value

Indicator parameters (19)

Indicator parameters – Joachimsthal
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aluminium	< 0,005 mg/l below limit of quantification	0.2 mg/l	< 3 % *	Single value
Ammonium	< 0,05 mg/l below limit of quantification	0.5 mg/l	< 10 % *	Single value
Calcite dissolution capacity	1,7 mg CaCO3/l	5 mg/l CaCO3	—	Single value
Chloride	6,5 mg/1	250 mg/l	—	Single value
Coliform bacteria	0 KBE/100 ml	0/100 ml	—	Single value
Colony count 22 °C	1 KBEt1 ml	ohne anormale Veränderung	—	Single value
Colony count 36 °C	0 KBEt1 ml	ohne anormale Veränderung	—	Single value
Colour	0,1 1/m	0.5 m⁻¹	—	Single value
Conductivity (25 °C)	220 µStern	2,790 µS/cm	—	Single value
Iron	0,009 mg/1	0.2 mg/l	—	Single value
Manganese	< 0,002 mg/1 below limit of quantification	50 µg/l	—	Single value
Odour	1 bei 23°C	für den Verbraucher annehmbar	—	Single value
pH	8,0	6,5–9,5	—	Single value
Sodium	5,65 mg/l	200 mg/l	3 %	Single value
Sulphate	25 mg/1	250 mg/l	—	Single value
Taste	ohne	für den Verbraucher annehmbar	—	Single value
Temperature	10,1 oc	—	—	Single value
Total organic carbon (TOC)	1,9 mgtl	ohne anormale Veränderung	—	Single value
Turbidity	0,04 NTU	1 NTU	—	Single value

Further parameters (8)

Further parameters – Joachimsthal
Parameter	Value	Parametric value	Share of the parametric value	Reference
Acid capacity to pH 4.3	1,49 mmol/l	—	—	Single value
Base capacity to pH 8.2	0,05 mmol/l	—	—	Single value
Carbonate hardness	4,17 ° dH	—	—	Single value
Hardness range (WRMG)	0,927 mmol/1	—	—	Single value
Magnesium	3,40 mg/l	—	—	Single value
Phosphate	0,28 mg/l	—	—	Single value
Potassium	0,73 mgtl	—	—	Single value
Saturation index	-0,191	—	—	Single value

Source: https://www.zwa-eberswalde.de/images/Daten_der_Wasserwerke/Joachimsthal/Parameter_Joachimsthal.pdf · Probenahme: 03.11.2025, Uhrzeit: 13:45; Probeneingang: 03.11.2025; Prüfzeitraum: 0.11.2025 - 13.11.2025 · retrieved on 13/07/2026

Postcodes in this zone: 16248

Oderberg

Anlage Oderberg (AKS GmbH Ffo.)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

Hardness range 20,3

Key values Oderberg
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	8,3 mg/I	50 mg/l	—	Single value
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Single value
Sulphate	73 mg/I	250 mg/l	—	Single value
Sodium	12,3 mg/I	200 mg/l	—	Single value

Show all recorded parameters (60 — most recent value per parameter)

Microbiology (2)

Microbiology – Oderberg
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Single value
Intestinal enterococci	0 KBE/100 ml	0/100 ml	—	Single value

Chemical parameters (34)

Chemical parameters – Oderberg
Parameter	Value	Parametric value	Share of the parametric value	Reference
1,2-dichloroethane	< 0,0003 mg/I below limit of quantification	3 µg/l	—	Single value
AMPA	< 0,00005 mg/1 below limit of quantification	—	—	Single value
Atrazine	< 0,00005 mg/I below limit of quantification	—	—	Single value
Bentazone	< 0,00005 mg/I below limit of quantification	—	—	Single value
Benzene	< 0,0005 mg/I below limit of quantification	1 µg/l	—	Single value
Bisphenol A	< 0,0001 mg/I below limit of quantification	2.5 µg/l	—	Single value
Boron	0,032 mg/I	1 mg/l	—	Single value
Bromacil	< 0,0 0005 mg/I below limit of quantification	—	—	Single value
Bromate	< 0,003 mg/I below limit of quantification	10 µg/l	—	Single value
Chromium	< 0,0005 mg/I below limit of quantification	25 µg/l	—	Single value
Copper	< 0,001 mg/I below limit of quantification	2 mg/l	—	Single value
Cyanide	< 0,005 mg/I below limit of quantification	50 µg/l	—	Single value
Desethylatrazine	< 0,00005 mg/I below limit of quantification	—	—	Single value
Desisopropylatrazine	< 0,00005 mg/I below limit of quantification	—	—	Single value
Diuron	< 0,00005 mg/I below limit of quantification	—	—	Single value
Ethidimuron	< 0,00005 mg/I below limit of quantification	—	—	Single value
Fluoride	0,24 mg/I	1.5 mg/l	—	Single value
Glyphosate	< 0,00005 mg/I below limit of quantification	—	—	Single value
Hexazinone	< 0,00005 mg/I below limit of quantification	—	—	Single value
MCPA	< 0,00005 mg/I below limit of quantification	—	—	Single value
Mecoprop	< 0,00005 mg/I below limit of quantification	—	—	Single value
Mercury	< 0,0001 mg/I below limit of quantification	1 µg/l	—	Single value
Metalaxyl	< 0,00005 mg/I below limit of quantification	—	—	Single value
Metazachlor	< 0,00005 mg/I below limit of quantification	—	—	Single value
Metazachlor acid	< 0,00005 mg/I below limit of quantification	—	—	Single value
Metolachlor	< 0,00005 mg/I below limit of quantification	—	—	Single value
Nitrate	8,3 mg/I	50 mg/l	—	Single value
Pesticides — Total	< 0,00005 mg/I below limit of quantification	0.5 µg/l	—	Single value
Selenium	< 0,001 mg/I below limit of quantification	10 µg/l	—	Single value
Simazine	< 0,00005 mg/I below limit of quantification	—	—	Single value
Terbuthylazine	< 0,00005 mg/I below limit of quantification	—	—	Single value
Tetrachloroethene	< 0,0001 mg/I below limit of quantification	—	—	Single value
Trichloroethene	< 0,0001 mg/I below limit of quantification	—	—	Single value
Uranium	0,0023 mg/I	10 µg/l	—	Single value

Indicator parameters (16)

Indicator parameters – Oderberg
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aluminium	< 0,005 mg/I below limit of quantification	0.2 mg/l	—	Single value
Ammonium	< 0,05 mg/I below limit of quantification	0.5 mg/l	—	Single value
Calcite dissolution capacity	-4,5 mg CaC0 3/I	5 mg/l CaCO3	—	Single value
Chloride	20 mg/I	250 mg/l	—	Single value
Coliform bacteria	0 KBE/100ml	0/100 ml	—	Single value
Colour	< 0,1 1/m below limit of quantification	0.5 m⁻¹	—	Single value
Iron	0,002 mg/I	0.2 mg/l	—	Single value
Manganese	< 0,002 mg/I below limit of quantification	50 µg/l	—	Single value
Odour	1	für den Verbraucher annehmbar	—	Single value
pH	7,17	6,5–9,5	—	Single value
Sodium	12,3 mg/I	200 mg/l	—	Single value
Sulphate	73 mg/I	250 mg/l	—	Single value
Taste	ohne	für den Verbraucher annehmbar	—	Single value
Temperature	11,1 'C	—	—	Single value
Total organic carbon (TOC)	2,1 mg/I	ohne anormale Veränderung	—	Single value
Turbidity	0,0 NTU	1 NTU	—	Single value

Further parameters (8)

Further parameters – Oderberg
Parameter	Value	Parametric value	Share of the parametric value	Reference
Acid capacity to pH 4.3	6,00 mmol/I	—	—	Single value
Base capacity to pH 8.2	1,00 mmol/I	—	—	Single value
Carbonate hardness	16,8 0 dH	—	—	Single value
Hardness range (WRMG)	3,62 mmol/I	—	—	Single value
Magnesium	21,3 mg/I	—	—	Single value
Phosphate	0,05 mg/I	—	—	Single value
Potassium	3,08 mg/I	—	—	Single value
Saturation index	0,037	—	—	Single value

Source: https://www.zwa-eberswalde.de/images/Daten_der_Wasserwerke/Oderberg/Parameter_Oderberg.pdf · 17.11.2025 - 17.12.2025 · retrieved on 13/07/2026

Postcodes in this zone: 16248

Eberswalde-Finow

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Postcodes in this zone: 16248

Eberswalde-Stadtsee

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Postcodes in this zone: 16248

Eberswalde-Tornow

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Postcodes in this zone: 16248

WW Brodowin

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – WW Brodowin
Parameter	Value	Parametric value	Share of the parametric value	Reference
pH	7,15	6,5–9,5	—	Single value · WW Brodowin

Source: https://zwa-eberswalde.de/?catid=90&id=50%3Adaten-der-wasserwerke&view=article · retrieved on 25/07/2026

Postcodes in this zone: 16248

WW Eichhorst

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – WW Eichhorst
Parameter	Value	Parametric value	Share of the parametric value	Reference
pH	7,31	6,5–9,5	—	Single value · WW Eichhorst

Source: https://zwa-eberswalde.de/?catid=90&id=50%3Adaten-der-wasserwerke&view=article · retrieved on 25/07/2026

Postcodes in this zone: 16248

WW Finow

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – WW Finow
Parameter	Value	Parametric value	Share of the parametric value	Reference
pH	7,44	6,5–9,5	—	Single value · WW Finow

Source: https://zwa-eberswalde.de/?catid=90&id=50%3Adaten-der-wasserwerke&view=article · retrieved on 25/07/2026

Postcodes in this zone: 16248

WW Joachimsthal

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – WW Joachimsthal
Parameter	Value	Parametric value	Share of the parametric value	Reference
pH	8,01	6,5–9,5	—	Single value · WW Joachimsthal

Source: https://zwa-eberswalde.de/?catid=90&id=50%3Adaten-der-wasserwerke&view=article · retrieved on 25/07/2026

Postcodes in this zone: 16248

WW Oderberg

Eberswalde

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – WW Oderberg
Parameter	Value	Parametric value	Share of the parametric value	Reference
pH	7,23	6,5–9,5	—	Single value · WW Oderberg

Source: https://zwa-eberswalde.de/?catid=90&id=50%3Adaten-der-wasserwerke&view=article · retrieved on 25/07/2026

Postcodes in this zone: 16248

Frequently asked questions about drinking water in Oderberg u.a.

How hard is the water in Oderberg u.a.?: Eberswalde publishes the hardness range 11,1 for the supply zone Eberswalde 1 (Stadtsee). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Oderberg u.a.?: Eberswalde publishes a nitrate value of 1,1 mg/l for the supply zone Eberswalde 1 (Stadtsee). The statutory parametric value is 50 mg/l; the measured value represents 2 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Oderberg u.a.?: Eberswalde. The values shown here come from the supply zone Eberswalde 1 (Stadtsee) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.