Skip to content
maunawai.info

Drinking water in Niederkrüchten

One supply zone, water supplier: Gemeindewerke Niederkrüchten GmbH.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.8 °dH
Hardness range mittel
Key values Dam
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 23,5 [mg/l] 50 mg/l Single value · Dam
Lead < 0,0002 [mg/l]
below limit of quantification
10 µg/l Single value · Dam
Escherichia coli (E. coli) 0 [100 ml-1] 0/100 ml Single value · Dam
Sulphate 37,15 [mg/l] 250 mg/l Single value · Dam
Sodium 10,4 [mg/l] 200 mg/l Single value · Dam
Show all recorded parameters (39 — most recent value per parameter)

Microbiology (2)

Microbiology – Dam
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 [100 ml-1] 0/100 ml Single value · Dam
Intestinal enterococci 0 [100 ml-1] 0/100 ml Single value · Dam

Chemical parameters (13)

Chemical parameters – Dam
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,0003 [mg/l]
below limit of quantification
10 µg/l Single value · Dam
Cadmium < 0,0001 [mg/l]
below limit of quantification
3 µg/l Single value · Dam
Chromium < 0,0005 [mg/l]
below limit of quantification
25 µg/l Single value · Dam
Copper 0,004 [mg/I] 2 mg/l Single value · Dam
Cyanide < 0,01 [mg/l]
below limit of quantification
50 µg/l Single value · Dam
Fluoride 0,056 [mg/l] 1.5 mg/l Single value · Dam
Lead < 0,0002 [mg/l]
below limit of quantification
10 µg/l Single value · Dam
Mercury < 0,0001 [mg/l]
below limit of quantification
1 µg/l Single value · Dam
Nickel 0,0043 [mg/l] 20 µg/l Single value · Dam
Nitrate 23,5 [mg/l] 50 mg/l Single value · Dam
Nitrite < 0,01 [mg/l]
below limit of quantification
0.5 mg/l Single value · Dam
Selenium < 0,001 [mg/l]
below limit of quantification
10 µg/l Single value · Dam
Uranium < 0,0005 [mg/l]
below limit of quantification
10 µg/l Single value · Dam

Indicator parameters (16)

Indicator parameters – Dam
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,01 [mg/l]
below limit of quantification
0.2 mg/l Single value · Dam
Ammonium < 0,05 [mg/I]
below limit of quantification
0.5 mg/l Single value · Dam
Chloride 16,5 [mg/l] 250 mg/l Single value · Dam
Coliform bacteria 0 [100 ml-1] 0/100 ml Single value · Dam
Colony count 22 °C 0 - ohne anormale Veränderung Single value · Dam
Colony count 36 °C 0 - ohne anormale Veränderung Single value · Dam
Colour < 0,1 [m-1]
below limit of quantification
0.5 m⁻¹ Single value · Dam
Iron < 0,01 [mg/l]
below limit of quantification
0.2 mg/l Single value · Dam
Manganese < 0,005 [mg/l]
below limit of quantification
50 µg/l Single value · Dam
Odour 1 [TON bei 23°C] für den Verbraucher annehmbar Single value · Dam
pH 7,72 - 6,5–9,5 Single value · Dam
Sodium 10,4 [mg/l] 200 mg/l Single value · Dam
Sulphate 37,15 [mg/l] 250 mg/l Single value · Dam
Taste ohne - für den Verbraucher annehmbar Single value · Dam
Temperature 13,1 [°C] Single value · Dam
Turbidity < 0,1 [NTU]
below limit of quantification
1 NTU Single value · Dam

Further parameters (8)

Further parameters – Dam
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,23 [mmol/l] Single value · Dam
Acid capacity to pH 8.2 6,32 (mmol/l) Single value · Dam
Calcium 51,8 [mg/l] Single value · Dam
Carbonate hardness 6,32 [°dH] Single value · Dam
Hardness range (WRMG) mittel - Single value · Dam
Magnesium 6,4 [mg/l] Single value · Dam
Potassium 2,85 [mg/l] Single value · Dam
Total hardness 8,8 [°dH] Single value · Dam

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gw-n.de/wp-content/uploads/2025/01/trrinkwasseranalyse_2024.pdf · Jahresdurchschnittsanalysedaten 2024 · retrieved on 11/07/2026

Postcodes in this zone: 41372

Frequently asked questions about drinking water in Niederkrüchten

How hard is the water in Niederkrüchten?
Gemeindewerke Niederkrüchten GmbH publishes a total hardness of 8.8 °dH for the supply zone Dam (hardness range mittel). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Niederkrüchten?
Gemeindewerke Niederkrüchten GmbH. The values shown here come from the supply zone Dam and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.