Skip to content
maunawai.info

Drinking water in Neumarkt in der Steiermark

One supply zone, water supplier: Arbon Energie AG.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.7 °dH
Hardness range medium
Key values Arbon
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.8 mg/l 40 mg/l
10 %
Mean · Arbon
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Arbon
Sulphate 31 mg/l Mean · Arbon
Sodium 5.5 mg/l 200 mg/l
3 %
Mean · Arbon
Show all recorded parameters (12 — most recent value per parameter)

Microbiology (3)

Microbiology – Arbon
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 16 KBE/ml 300 1/ml Mean · Arbon
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Arbon
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Arbon

Chemical parameters (1)

Chemical parameters – Arbon
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.8 mg/l 40 mg/l
10 %
Mean · Arbon

Indicator parameters (4)

Indicator parameters – Arbon
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7.34 mg/l Mean · Arbon
pH 7.93 Mean · Arbon
Sodium 5.5 mg/l 200 mg/l
3 %
Mean · Arbon
Sulphate 31 mg/l Mean · Arbon

Further parameters (4)

Further parameters – Arbon
Parameter Value Parametric value Share of the parametric value Reference
Calcium 49.9 mg/l Mean · Arbon
Magnesium 8.4 mg/l Mean · Arbon
Potassium 1.33 mg/l Mean · Arbon
Total hardness 15.5 °fH Mean · Arbon

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1134/arbon-energie-ag/2309/arbon · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 9323

Frequently asked questions about drinking water in Neumarkt in der Steiermark

How hard is the water in Neumarkt in der Steiermark?
Arbon Energie AG publishes a total hardness of 15.5 °fH for the supply zone Arbon — that corresponds to 8.7 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Neumarkt in der Steiermark?
Arbon Energie AG publishes a nitrate value of 3.8 mg/l for the supply zone Arbon. The statutory parametric value is 40 mg/l; the measured value represents 10 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Neumarkt in der Steiermark?
Arbon Energie AG. The values shown here come from the supply zone Arbon and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.