Skip to content
maunawai.info

Drinking water in Neuenegg

One supply zone, water supplier: Wasserversorgung Neuenegg.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13.4 °dH
Hardness range medium
Key values Neuenegg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7.6 mg/l 40 mg/l
19 %
Mean · Neuenegg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Neuenegg
Sulphate 42.2 mg/l Mean · Neuenegg
Sodium 6.7 mg/l 200 mg/l
3 %
Mean · Neuenegg
Show all recorded parameters (17 — most recent value per parameter)

Microbiology (3)

Microbiology – Neuenegg
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 8.9 KBE/ml 300 1/ml Mean · Neuenegg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Neuenegg
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Neuenegg

Chemical parameters (2)

Chemical parameters – Neuenegg
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.09 mg/l 1.5 mg/l
6 %
Mean · Neuenegg
Nitrate 7.6 mg/l 40 mg/l
19 %
Mean · Neuenegg

Indicator parameters (7)

Indicator parameters – Neuenegg
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7.2 mg/l Mean · Neuenegg
Conductivity (25 °C) 479 µS/cm Mean · Neuenegg
pH 7.85 Mean · Neuenegg
Sodium 6.7 mg/l 200 mg/l
3 %
Mean · Neuenegg
Sulphate 42.2 mg/l Mean · Neuenegg
Temperature 8.9 °C Mean · Neuenegg
Turbidity 0.18 TE/F Mean · Neuenegg

Further parameters (5)

Further parameters – Neuenegg
Parameter Value Parametric value Share of the parametric value Reference
Calcium 81.1 mg/l Mean · Neuenegg
Hydrogen carbonate 19.45 mg/l Mean · Neuenegg
Magnesium 8.8 mg/l Mean · Neuenegg
Potassium 1.8 mg/l Mean · Neuenegg
Total hardness 23.9 °fH Mean · Neuenegg

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/639/wasserversorgung-neuenegg/3709/neuenegg · 2026 · 2026 · retrieved on 07/08/2026

Postcodes in this zone: 3176

Frequently asked questions about drinking water in Neuenegg

How hard is the water in Neuenegg?
Wasserversorgung Neuenegg publishes a total hardness of 23.9 °fH for the supply zone Neuenegg — that corresponds to 13.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2026, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Neuenegg?
Wasserversorgung Neuenegg publishes a nitrate value of 7.6 mg/l for the supply zone Neuenegg. The statutory parametric value is 40 mg/l; the measured value represents 19 % of the parametric value. Basis: 2026, retrieved on 07/08/2026.
Who supplies the drinking water in Neuenegg?
Wasserversorgung Neuenegg. The values shown here come from the supply zone Neuenegg and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.