How hard is the water in Mürren?

Wasserversorgungsgenossenschaft Mürren publishes a total hardness of 12.3 °fH for the supply zone Mürren — that corresponds to 6.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Mürren?

Wasserversorgungsgenossenschaft Mürren publishes a nitrate value of 1 mg/l for the supply zone Mürren. The statutory parametric value is 40 mg/l; the measured value represents 3 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.

Who supplies the drinking water in Mürren?

Wasserversorgungsgenossenschaft Mürren. The values shown here come from the supply zone Mürren and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Mürren

One supply zone, water supplier: Wasserversorgungsgenossenschaft Mürren.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Mürren

Wasserversorgungsgenossenschaft Mürren

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness

6.9 °dH

Hardness range soft

Key values Mürren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	1 mg/l	40 mg/l	3 %	Mean · Mürren
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Mürren
Sulphate	12 mg/l	—	—	Mean · Mürren
Sodium	0.5 mg/l	200 mg/l	0.3 %	Mean · Mürren

Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Mürren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	0.75 KBE/ml	300 1/ml	—	Mean · Mürren
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Mürren
Intestinal enterococci	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Mürren

Chemical parameters (1)

Chemical parameters – Mürren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	1 mg/l	40 mg/l	3 %	Mean · Mürren

Indicator parameters (5)

Indicator parameters – Mürren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Chloride	0.1 mg/l	—	—	Mean · Mürren
Sodium	0.5 mg/l	200 mg/l	0.3 %	Mean · Mürren
Sulphate	12 mg/l	—	—	Mean · Mürren
Temperature	4.4 °C	—	—	Mean · Mürren
Turbidity	0.3 TE/F	—	—	Mean · Mürren

Further parameters (4)

Further parameters – Mürren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	46 mg/l	—	—	Mean · Mürren
Magnesium	2 mg/l	—	—	Mean · Mürren
Potassium	0.2 mg/l	—	—	Mean · Mürren
Total hardness	12.3 °fH	—	—	Mean · Mürren

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1352/wasserversorgungsgenossenschaft-murren/1974/murren · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 3825

Frequently asked questions about drinking water in Mürren

How hard is the water in Mürren?: Wasserversorgungsgenossenschaft Mürren publishes a total hardness of 12.3 °fH for the supply zone Mürren — that corresponds to 6.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Mürren?: Wasserversorgungsgenossenschaft Mürren publishes a nitrate value of 1 mg/l for the supply zone Mürren. The statutory parametric value is 40 mg/l; the measured value represents 3 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Mürren?: Wasserversorgungsgenossenschaft Mürren. The values shown here come from the supply zone Mürren and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.