Drinking water in Miesbach
One supply zone, water supplier: Stadt Miesbach.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
HB Harzberg, Zapfhahn 1230/0182/00089
Stadt MiesbachAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 12/10/2020. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 6,4 mg/l | 50 mg/l | 13 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 39 mg/l | 250 mg/l | 16 % | Single value |
| Sodium | 5 mg/l | 200 mg/l | 3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (56 — most recent value per parameter)
Microbiology (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Chemical parameters (28)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,2 µg/l below limit of quantification | 3 µg/l | < 7 % * | Single value |
| Antimony | <0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Benzene | <0,2 µg/l below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Benzo(b)fluoranthene | <0,01 µg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,01 µg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,01 µg/l below limit of quantification | — | — | Single value |
| Boron | <0,1 mg/l below limit of quantification | 1 mg/l | < 10 % * | Single value |
| Bromate | <0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Cadmium | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chromium | <0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | <0,005 mg/l below limit of quantification | 2 mg/l | < 0.3 % * | Single value |
| Cyanide | <0,002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Single value |
| Dibromochloromethane | <0,5 µg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,14 mg/l | 1.5 mg/l | 9 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Nickel | <0,002 mg/l below limit of quantification | 20 µg/l | < 10 % * | Single value |
| Nitrate | 6,4 mg/l | 50 mg/l | 13 % | Single value |
| Nitrite | <0,005 mg/l below limit of quantification | 0.5 mg/l | < 1 % * | Single value |
| Polycyclic aromatic hydrocarbons | n.n. µg/l not detectable | 0.1 µg/l | — | Single value |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Tetrachloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Tribromomethane (bromoform) | <0,5 µg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0,5 µg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | n.n. µg/l not detectable | 50 µg/l | — | Single value |
| Uranium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (17)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,02 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Ammonium | <0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Chloride | 7,4 mg/l | 250 mg/l | 3 % | Single value |
| Coliform bacteria | 0 1/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 1/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 1 1/ml | ohne anormale Veränderung | — | Single value |
| Colour | farblos Unit not stated in the document | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 560 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| pH | 7,46 | 6,5–9,5 | — | Single value |
| Sodium | 5 mg/l | 200 mg/l | 3 % | Single value |
| Sulphate | 39 mg/l | 250 mg/l | 16 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 10,4 °C | — | — | Single value |
| Total organic carbon (TOC) | 0,6 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | <0,1 FNU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Treatment substances (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Free chlorine | <0,05 mg/l below limit of quantification | — | — | Single value |
Further parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Base capacity to pH 8.2 | 0,4 mmol/l | — | — | Single value |
| Calcium | 88 mg/l | — | — | Single value |
| Dissolved organic carbon (DOC) | 0,7 mg/l | — | — | Single value |
| Hardness range (WRMG) | hart | — | — | Single value |
| Magnesium | 24 mg/l | — | — | Single value |
| Phosphate | <0,1 mg/l below limit of quantification | — | — | Single value |
| Potassium | <1 mg/l below limit of quantification | — | — | Single value |
| Silicate / silicic acid | 1,9 mg/l | — | — | Single value |
| Total hardness | 3,2 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 83714
Frequently asked questions about drinking water in Miesbach
- How hard is the water in Miesbach?
- Stadt Miesbach publishes a total hardness of 3,2 mmol/l for the supply zone HB Harzberg, Zapfhahn 1230/0182/00089 — that corresponds to 17.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 12.10.2020, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Miesbach?
- Stadt Miesbach publishes a nitrate value of 6,4 mg/l for the supply zone HB Harzberg, Zapfhahn 1230/0182/00089. The statutory parametric value is 50 mg/l; the measured value represents 13 % of the parametric value. Basis: 12.10.2020, retrieved on 11/07/2026.
- Who supplies the drinking water in Miesbach?
- Stadt Miesbach. The values shown here come from the supply zone HB Harzberg, Zapfhahn 1230/0182/00089 and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.