Skip to content
maunawai.info

Drinking water in Mehring

There are 2 places with this name — listed below by area. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Mehring (54346)

Pumpwerk Kenn

SWT Wasser GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.3 °dH
Hardness range medium
Key values Pumpwerk Kenn
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,4 mg/l 50 mg/l
15 %
Single value
Lead <0,3 µg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Escherichia coli (E. coli) 0 1/100ml 0/100 ml Single value
Sulphate 19 mg/l 250 mg/l
8 %
Single value
Sodium 14,2 mg/l 200 mg/l
7 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (101 — most recent value per parameter)

Microbiology (2)

Microbiology – Pumpwerk Kenn
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 1/100ml 0/100 ml Single value
Intestinal enterococci 0 1/100ml 0/100 ml Single value

Chemical parameters (70)

Chemical parameters – Pumpwerk Kenn
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,20 µg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Acrylamide <0,02 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Single value
AMPA <0,020 µg/l
below limit of quantification
Single value
Antimony <0,3 µg/l
below limit of quantification
5 µg/l
< 6 % *
Single value
Arsenic <0,6 µg/l
below limit of quantification
10 µg/l
< 6 % *
Single value
Atrazine <0,020 µg/l
below limit of quantification
Single value
Bentazone <0,02 µg/l
below limit of quantification
Single value
Benzene <0,20 µg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Benzo(a)pyrene <0,001 µg/l
below limit of quantification
10 ng/l
< 10 % *
Single value
Benzo(b)fluoranthene <0,001 µg/l
below limit of quantification
Single value
Benzo(ghi)perylene <0,001 µg/l
below limit of quantification
Single value
Benzo(k)fluoranthene <0,001 µg/l
below limit of quantification
Single value
Bisphenol A <0,10 µg/l
below limit of quantification
2.5 µg/l
< 4 % *
Single value
Boron <0,05 mg/l
below limit of quantification
1 mg/l
< 5 % *
Single value
Boscalid <0,020 µg/l
below limit of quantification
Single value
Bromacil <0,020 µg/l
below limit of quantification
Single value
Bromate <0,0030 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,2 µg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Chlorate <0,020 mg/l
below limit of quantification
70 µg/l
< 29 % *
Single value
Chloridazon <0,020 µg/l
below limit of quantification
Single value
Chlorite <0,020 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Chlorotoluron <0,020 µg/l
below limit of quantification
Single value
Chromium <0,3 µg/l
below limit of quantification
25 µg/l
< 1 % *
Single value
Copper 0,003 mg/l 2 mg/l
0.2 %
Single value
Cyanide <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Desethylatrazine <0,020 µg/l
below limit of quantification
Single value
Desisopropylatrazine <0,020 µg/l
below limit of quantification
Single value
Dibromochloromethane <0,20 µg/l
below limit of quantification
Single value
Dichlorprop <0,02 µg/l
below limit of quantification
Single value
Diflufenican <0,020 µg/l
below limit of quantification
Single value
Dimethachlor <0,020 µg/l
below limit of quantification
Single value
Dimethachlor sulfonic acid <0,020 µg/l
below limit of quantification
Single value
Dimethenamid <0,020 µg/l
below limit of quantification
Single value
Diuron <0,020 µg/l
below limit of quantification
Single value
Epichlorohydrin <0,025 µg/l
below limit of quantification
0.1 µg/l
< 25 % *
Single value
Flufenacet <0,020 µg/l
below limit of quantification
Single value
Fluoranthene <0,001 µg/l
below limit of quantification
Single value
Fluoride 0,17 mg/l 1.5 mg/l
11 %
Single value
Glyphosate <0,020 µg/l
below limit of quantification
Single value
Haloacetic acids (HAA) 0 µg/l Single value
Imidacloprid <0,020 µg/l
below limit of quantification
Single value
Indeno(1,2,3-cd)pyrene <0,001 µg/l
below limit of quantification
Single value
Isoproturon <0,020 µg/l
below limit of quantification
Single value
Lead <0,3 µg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Lenacil <0,020 µg/l
below limit of quantification
Single value
MCPA <0,02 µg/l
below limit of quantification
Single value
Mecoprop <0,02 µg/l
below limit of quantification
Single value
Mercury <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Metalaxyl <0,020 µg/l
below limit of quantification
Single value
Metazachlor <0,020 µg/l
below limit of quantification
Single value
Metazachlor sulfonic acid <0,020 µg/l
below limit of quantification
Single value
Metolachlor <0,020 µg/l
below limit of quantification
Single value
Metolachlor sulfonic acid <0,020 µg/l
below limit of quantification
Single value
Nickel <0,5 µg/l
below limit of quantification
20 µg/l
< 3 % *
Single value
Nitrate 7,4 mg/l 50 mg/l
15 %
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total 0,0 µg/l 0.5 µg/l
0 %
Single value
Propazine <0,020 µg/l
below limit of quantification
Single value
Propiconazole <0,020 µg/l
below limit of quantification
Single value
Selenium <0,6 µg/l
below limit of quantification
10 µg/l
< 6 % *
Single value
Simazine <0,020 µg/l
below limit of quantification
Single value
Tebuconazole <0,020 µg/l
below limit of quantification
Single value
Terbuthylazine <0,020 µg/l
below limit of quantification
Single value
Tetrachloroethene <0,20 µg/l
below limit of quantification
Single value
Tribromomethane (bromoform) <0,20 µg/l
below limit of quantification
Single value
Trichloroethene <0,20 µg/l
below limit of quantification
Single value
Trichloromethane (chloroform) <0,20 µg/l
below limit of quantification
Single value
Trihalomethanes — Total 0,0 µg/l 50 µg/l
0 %
Single value
Uranium 0,8 µg/l 10 µg/l
8 %
Single value
Vinyl chloride <0,10 µg/l
below limit of quantification
0.5 µg/l
< 20 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Pumpwerk Kenn
Parameter Value Parametric value Share of the parametric value Reference
Trifluoroacetic acid (TFA) 0,47 µg/l 60 µg/l
UBA guide value
0.8 %
Single value

For trifluoroacetic acid (TFA), the German Drinking Water Ordinance does not specify a parametric value. The comparison is therefore made with the guide value of 60 µg/l issued by the Umweltbundesamt, which has replaced the earlier health-related guidance value of 3 µg/l. A guide value is not a legal maximum but a health-related classification.

Metabolites (1)

Metabolites – Pumpwerk Kenn
Parameter Value Parametric value Share of the parametric value Reference
Desphenyl-chloridazon <0,020 µg/l
below limit of quantification
Single value

Indicator parameters (19)

Indicator parameters – Pumpwerk Kenn
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Ammonium <0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Calcite dissolution capacity 3,8 mg/l 5 mg/l CaCO3 Single value
Chloride 20 mg/l 250 mg/l
8 %
Single value
Clostridium perfringens (including spores) 0 1/100ml 0/100 ml Single value
Coliform bacteria 0 1/100ml 0/100 ml Single value
Colony count 22 °C 0 1/ml ohne anormale Veränderung Single value
Colony count 36 °C 3 1/ml ohne anormale Veränderung Single value
Colour 0,2 m-1 0.5 m⁻¹ Single value
Conductivity (25 °C) 385,0 µS/cm 2,790 µS/cm Single value
Iron <0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Odour Nein für den Verbraucher annehmbar Single value
pH 7,68 6,5–9,5 Single value
Sodium 14,2 mg/l 200 mg/l
7 %
Single value
Sulphate 19 mg/l 250 mg/l
8 %
Single value
Taste Nein für den Verbraucher annehmbar Single value
Temperature 11,1 °C Single value
Turbidity 0,31 FNU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Pumpwerk Kenn
Parameter Value Parametric value Share of the parametric value Reference
Barium 0,07 mg/l Single value
Calcium 38,0 mg/l Single value
Carbonate hardness 1,49 mmol/l Single value
Hydrogen carbonate 181,2 mg/l Single value
Magnesium 17,1 mg/l Single value
Potassium 3,2 mg/l Single value
Total hardness 1,66 mmol/l Single value
Zinc <0,002 mg/l
below limit of quantification
Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wasser-schweich.de/wasserversorgung/trinkwasseruntersuchung/pw-kenn-25-1.pdf?cid=75zp · 15.12.2025 · Probenahme 02.12.2025/09:13, Prüfzeitraum 02.12.2025-12.12.2025 · retrieved on 11/07/2026

Postcodes in this zone: 54346

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
8.7 °dH
Hardness range medium
Key values PW Kenn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0.004 µg/L 0.1 µg/l
4 %
Mean · PW Kenn (WW), TW
Nitrate 7.5 mg/L 50 mg/l
15 %
Mean · PW Kenn (WW), TW
Lead < 0.3 µg/L
below limit of quantification
10 µg/l
< 3 % *
Mean · PW Kenn (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · PW Kenn (WW), TW
Sulphate 17 mg/L 250 mg/l
7 %
Mean · PW Kenn (WW), TW
Sodium 11.4 mg/L 200 mg/l
6 %
Mean · PW Kenn (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (31 — most recent value per parameter)

Microbiology (1)

Microbiology – PW Kenn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · PW Kenn (WW), TW

Chemical parameters (14)

Chemical parameters – PW Kenn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.3 µg/L
below limit of quantification
5 µg/l
< 6 % *
Mean · PW Kenn (WW), TW
Arsenic < 0.6 µg/L
below limit of quantification
10 µg/l
< 6 % *
Mean · PW Kenn (WW), TW
Boron < 0.05 mg/L
below limit of quantification
1 mg/l
< 5 % *
Mean · PW Kenn (WW), TW
Cadmium < 0.2 µg/L
below limit of quantification
3 µg/l
< 7 % *
Mean · PW Kenn (WW), TW
Copper 0.004 mg/L 2 mg/l
0.2 %
Mean · PW Kenn (WW), TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · PW Kenn (WW), TW
Fluoride 0.13 mg/L 1.5 mg/l
9 %
Mean · PW Kenn (WW), TW
Lead < 0.3 µg/L
below limit of quantification
10 µg/l
< 3 % *
Mean · PW Kenn (WW), TW
Mercury < 0.05 µg/L
below limit of quantification
1 µg/l
< 5 % *
Mean · PW Kenn (WW), TW
Nickel < 0.5 µg/L
below limit of quantification
20 µg/l
< 3 % *
Mean · PW Kenn (WW), TW
Nitrate 7.5 mg/L 50 mg/l
15 %
Mean · PW Kenn (WW), TW
Nitrite < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · PW Kenn (WW), TW
Selenium < 0.6 µg/L
below limit of quantification
10 µg/l
< 6 % *
Mean · PW Kenn (WW), TW
Uranium 0.8 µg/L 10 µg/l
8 %
Mean · PW Kenn (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – PW Kenn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0.004 µg/L 0.1 µg/l
4 %
Mean · PW Kenn (WW), TW

Indicator parameters (10)

Indicator parameters – PW Kenn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.01 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Mean · PW Kenn (WW), TW
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · PW Kenn (WW), TW
Chloride 17 mg/L 250 mg/l
7 %
Mean · PW Kenn (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · PW Kenn (WW), TW
Iron < 0.005 mg/L
below limit of quantification
0.2 mg/l
< 3 % *
Mean · PW Kenn (WW), TW
Manganese < 0.002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Mean · PW Kenn (WW), TW
pH 7.75 - 6,5–9,5 Mean · PW Kenn (WW), TW
Sodium 11.4 mg/L 200 mg/l
6 %
Mean · PW Kenn (WW), TW
Sulphate 17 mg/L 250 mg/l
7 %
Mean · PW Kenn (WW), TW
Temperature 12.2 °C Mean · PW Kenn (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – PW Kenn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 36.3 mg/L Mean · PW Kenn (WW), TW
Magnesium 17.5 mg/L Mean · PW Kenn (WW), TW
Potassium 3 mg/L Mean · PW Kenn (WW), TW
Total hardness 1.56 mmol/l Mean · PW Kenn (WW), TW
Zinc 0.003 mg/L Mean · PW Kenn (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2671695005/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 54346

Frequently asked questions about drinking water in Mehring

How hard is the water in Mehring?
SWT Wasser GmbH publishes a total hardness of 1,66 mmol/l for the supply zone Pumpwerk Kenn — that corresponds to 9.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 15.12.2025, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Mehring?
SWT Wasser GmbH publishes a nitrate value of 7,4 mg/l for the supply zone Pumpwerk Kenn. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: 15.12.2025, retrieved on 11/07/2026.
Who supplies the drinking water in Mehring?
SWT Wasser GmbH. The values shown here come from the supply zone Pumpwerk Kenn and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.

No data yet

For postcode 84561 there is no verified assignment yet.