Skip to content
maunawai.info

Drinking water in Marisfeld, Rohr u.a.

12 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 7,70

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Adelhausen
Parameter Value Parametric value Share of the parametric value Reference
pH 8,35 6,5–9,5 Single value · Adelhausen

Further parameters (1)

Further parameters – Adelhausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 7,70 °dH Single value · Adelhausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 98530

Show 11 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
4.2 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Ahlstädt
Parameter Value Parametric value Share of the parametric value Reference
pH 8,4 6,5–9,5 Single value · Ahlstädt

Further parameters (2)

Further parameters – Ahlstädt
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Ahlstädt
Total hardness 4,2 °dH Single value · Ahlstädt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.zwas.de/assets/pdf/wasserwerte.pdf · retrieved on 25/07/2026

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 8,40

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Albingshausen
Parameter Value Parametric value Share of the parametric value Reference
pH 8,66 6,5–9,5 Single value · Albingshausen

Further parameters (1)

Further parameters – Albingshausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 8,40 °dH Single value · Albingshausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
4.4 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Albrechts
Parameter Value Parametric value Share of the parametric value Reference
pH 8,0 6,5–9,5 Single value · Albrechts

Further parameters (2)

Further parameters – Albrechts
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Albrechts
Total hardness 4,4 °dH Single value · Albrechts

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.zwas.de/assets/pdf/wasserwerte.pdf · retrieved on 25/07/2026

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
4.2 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Altendambach
Parameter Value Parametric value Share of the parametric value Reference
pH 8,0 6,5–9,5 Single value · Altendambach

Further parameters (2)

Further parameters – Altendambach
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Altendambach
Total hardness 4,2 °dH Single value · Altendambach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.zwas.de/assets/pdf/wasserwerte.pdf · retrieved on 25/07/2026

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 8,20

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Bad Colberg
Parameter Value Parametric value Share of the parametric value Reference
pH 7,92 6,5–9,5 Single value · Bad Colberg

Further parameters (1)

Further parameters – Bad Colberg
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 8,20 °dH Single value · Bad Colberg

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 7,60

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Bedheim
Parameter Value Parametric value Share of the parametric value Reference
pH 8,06 6,5–9,5 Single value · Bedheim

Further parameters (1)

Further parameters – Bedheim
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 7,60 °dH Single value · Bedheim

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 4,20

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Beinerstadt
Parameter Value Parametric value Share of the parametric value Reference
pH 7,83 6,5–9,5 Single value · Beinerstadt

Further parameters (1)

Further parameters – Beinerstadt
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 4,20 °dH Single value · Beinerstadt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
4.1 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Benshausen Mischwasser
Parameter Value Parametric value Share of the parametric value Reference
pH 8,1 6,5–9,5 Single value · Benshausen - Mischwasser

Further parameters (2)

Further parameters – Benshausen Mischwasser
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Benshausen - Mischwasser
Total hardness 4,1 °dH Single value · Benshausen - Mischwasser

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.zwas.de/assets/pdf/wasserwerte.pdf · retrieved on 25/07/2026

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 4,00

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Biberschlag
Parameter Value Parametric value Share of the parametric value Reference
pH 7,93 6,5–9,5 Single value · Biberschlag

Further parameters (1)

Further parameters – Biberschlag
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 4,00 °dH Single value · Biberschlag

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
4.2 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Bischofrod
Parameter Value Parametric value Share of the parametric value Reference
pH 8,3 6,5–9,5 Single value · Bischofrod

Further parameters (2)

Further parameters – Bischofrod
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Bischofrod
Total hardness 4,2 °dH Single value · Bischofrod

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.zwas.de/assets/pdf/wasserwerte.pdf · retrieved on 25/07/2026

Postcodes in this zone: 98530

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 9,30

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Bockstadt
Parameter Value Parametric value Share of the parametric value Reference
pH 6,92 6,5–9,5 Single value · Bockstadt

Further parameters (1)

Further parameters – Bockstadt
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 9,30 °dH Single value · Bockstadt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 98530

Frequently asked questions about drinking water in Marisfeld, Rohr u.a.

How hard is the water in Marisfeld, Rohr u.a.?
Wasser- und Abwasserverband Hildburghausen (WAVH) publishes the hardness range 7,70 for the supply zone Adelhausen. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Marisfeld, Rohr u.a.?
Wasser- und Abwasserverband Hildburghausen (WAVH). The values shown here come from the supply zone Adelhausen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.