Skip to content
maunawai.info

Drinking water in Maria Schmolln, St. Johann am Walde

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Birr und Birrhard

IKA Werkhof Birrfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19.7 °dH
Hardness range hard
Key values Birr und Birrhard
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 27.25 mg/l 40 mg/l
68 %
Mean · Birr und Birrhard
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Birr und Birrhard
Sulphate 18.8 mg/l Mean · Birr und Birrhard
Sodium 10.4 mg/l 200 mg/l
5 %
Mean · Birr und Birrhard
Show all recorded parameters (16 — most recent value per parameter)

Microbiology (3)

Microbiology – Birr und Birrhard
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3.8 KBE/ml 300 1/ml Mean · Birr und Birrhard
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Birr und Birrhard
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Birr und Birrhard

Chemical parameters (2)

Chemical parameters – Birr und Birrhard
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Birr und Birrhard
Nitrate 27.25 mg/l 40 mg/l
68 %
Mean · Birr und Birrhard

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Birr und Birrhard
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0.024 µg/l 0.1 µg/l
24 %
Mean · Birr und Birrhard
Chlorothalonil metabolite R471811 0.16 µg/l 0.1 µg/l
160 % Mean above the parametric value
Mean · Birr und Birrhard

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

Indicator parameters (4)

Indicator parameters – Birr und Birrhard
Parameter Value Parametric value Share of the parametric value Reference
Chloride 23.5 mg/l Mean · Birr und Birrhard
pH 7.16 Mean · Birr und Birrhard
Sodium 10.4 mg/l 200 mg/l
5 %
Mean · Birr und Birrhard
Sulphate 18.8 mg/l Mean · Birr und Birrhard

Further parameters (5)

Further parameters – Birr und Birrhard
Parameter Value Parametric value Share of the parametric value Reference
Calcium 129 mg/l Mean · Birr und Birrhard
Dissolved organic carbon (DOC) 0.3 mg/l Mean · Birr und Birrhard
Magnesium 6.7 mg/l Mean · Birr und Birrhard
Potassium 1.6 mg/l Mean · Birr und Birrhard
Total hardness 35.1 °fH Mean · Birr und Birrhard

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 5242

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
18.5 °dH
Hardness range hard
Key values Lupfig
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 16.2 mg/l 40 mg/l
41 %
Mean · Lupfig
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Lupfig
Sulphate 27 mg/l Mean · Lupfig
Sodium 7.7 mg/l 200 mg/l
4 %
Mean · Lupfig
Show all recorded parameters (14 — most recent value per parameter)

Microbiology (3)

Microbiology – Lupfig
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 46.4 KBE/ml 300 1/ml Mean · Lupfig
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Lupfig
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Lupfig

Chemical parameters (1)

Chemical parameters – Lupfig
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 16.2 mg/l 40 mg/l
41 %
Mean · Lupfig

Indicator parameters (5)

Indicator parameters – Lupfig
Parameter Value Parametric value Share of the parametric value Reference
Chloride 12.8 mg/l Mean · Lupfig
pH 7.6 Mean · Lupfig
Sodium 7.7 mg/l 200 mg/l
4 %
Mean · Lupfig
Sulphate 27 mg/l Mean · Lupfig
Temperature 9.9 °C Mean · Lupfig

Further parameters (5)

Further parameters – Lupfig
Parameter Value Parametric value Share of the parametric value Reference
Calcium 117 mg/l Mean · Lupfig
Dissolved organic carbon (DOC) 0.45 mg/l Mean · Lupfig
Magnesium 9.1 mg/l Mean · Lupfig
Potassium 2 mg/l Mean · Lupfig
Total hardness 33.1 °fH Mean · Lupfig

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/854/ika-werkhof-birrfeld/3772/lupfig · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 5242

Frequently asked questions about drinking water in Maria Schmolln, St. Johann am Walde

How hard is the water in Maria Schmolln, St. Johann am Walde?
IKA Werkhof Birrfeld publishes a total hardness of 35.1 °fH for the supply zone Birr und Birrhard — that corresponds to 19.7 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Maria Schmolln, St. Johann am Walde?
IKA Werkhof Birrfeld publishes a nitrate value of 27.25 mg/l for the supply zone Birr und Birrhard. The statutory parametric value is 40 mg/l; the measured value represents 68 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Maria Schmolln, St. Johann am Walde?
IKA Werkhof Birrfeld. The values shown here come from the supply zone Birr und Birrhard and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.