Skip to content
maunawai.info

Drinking water in Mägenwil

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Mägenwil

Mägenwil

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19 °dH
Hardness range hard
Key values Mägenwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 19 mg/l 40 mg/l
48 %
Mean · Mägenwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Mägenwil
Sulphate 21 mg/l Mean · Mägenwil
Sodium 7.2 mg/l 200 mg/l
4 %
Mean · Mägenwil
Show all recorded parameters (16 — most recent value per parameter)

Microbiology (3)

Microbiology – Mägenwil
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 1 KBE/ml 300 1/ml Mean · Mägenwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Mägenwil
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Mägenwil

Chemical parameters (1)

Chemical parameters – Mägenwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 19 mg/l 40 mg/l
48 %
Mean · Mägenwil

Indicator parameters (6)

Indicator parameters – Mägenwil
Parameter Value Parametric value Share of the parametric value Reference
Chloride 13.5 mg/l Mean · Mägenwil
Conductivity (25 °C) 634 µS/cm Mean · Mägenwil
pH 7.6 Mean · Mägenwil
Sodium 7.2 mg/l 200 mg/l
4 %
Mean · Mägenwil
Sulphate 21 mg/l Mean · Mägenwil
Temperature 8.7 °C Mean · Mägenwil

Further parameters (6)

Further parameters – Mägenwil
Parameter Value Parametric value Share of the parametric value Reference
Calcium 106 mg/l Mean · Mägenwil
Dissolved organic carbon (DOC) 0.4 mg/l Mean · Mägenwil
Hydrogen carbonate 370 mg/l Mean · Mägenwil
Magnesium 17.8 mg/l Mean · Mägenwil
Potassium 1.5 mg/l Mean · Mägenwil
Total hardness 33.9 °fH Mean · Mägenwil

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/846/magenwil/2322/magenwil · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 5506

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.4 °dH
Hardness range hard
Key values Othmarsingen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 26 mg/l 40 mg/l
65 %
Mean · Othmarsingen
Show all recorded parameters (4 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Othmarsingen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 26 mg/l 40 mg/l
65 %
Mean · Othmarsingen

Further parameters (3)

Further parameters – Othmarsingen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 103.5 mg/l Mean · Othmarsingen
Magnesium 16.8 mg/l Mean · Othmarsingen
Total hardness 32.8 °fH Mean · Othmarsingen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 5506

Frequently asked questions about drinking water in Mägenwil

How hard is the water in Mägenwil?
Mägenwil publishes a total hardness of 33.9 °fH for the supply zone Mägenwil — that corresponds to 19 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Mägenwil?
Mägenwil publishes a nitrate value of 19 mg/l for the supply zone Mägenwil. The statutory parametric value is 40 mg/l; the measured value represents 48 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Mägenwil?
Mägenwil. The values shown here come from the supply zone Mägenwil and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.