Skip to content
maunawai.info

Drinking water in Lupsingen

One supply zone, water supplier: Wasserversorgung Lupsingen.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14 °dH
Hardness range hard
Key values Lupsingen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 10.7 mg/l 40 mg/l
27 %
Mean · Lupsingen
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lupsingen
Sulphate 10 mg/l Mean · Lupsingen
Sodium 2.5 mg/l 200 mg/l
1 %
Mean · Lupsingen
Show all recorded parameters (17 — most recent value per parameter)

Microbiology (3)

Microbiology – Lupsingen
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 32 KBE/ml 300 1/ml Mean · Lupsingen
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lupsingen
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lupsingen

Chemical parameters (2)

Chemical parameters – Lupsingen
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.14 mg/l 1.5 mg/l
9 %
Mean · Lupsingen
Nitrate 10.7 mg/l 40 mg/l
27 %
Mean · Lupsingen

Indicator parameters (8)

Indicator parameters – Lupsingen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 2.5 mg/l Mean · Lupsingen
Conductivity (25 °C) 509.5 µS/cm Mean · Lupsingen
Iron 0.013 mg/l 0.2 mg/l
6 %
Mean · Lupsingen
Manganese 0.0002 mg/l 50 µg/l
0.4 %
Mean · Lupsingen
pH 7.46 Mean · Lupsingen
Sodium 2.5 mg/l 200 mg/l
1 %
Mean · Lupsingen
Sulphate 10 mg/l Mean · Lupsingen
Turbidity 0.52 TE/F Mean · Lupsingen

Further parameters (4)

Further parameters – Lupsingen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 104 mg/l Mean · Lupsingen
Magnesium 2.5 mg/l Mean · Lupsingen
Potassium 1.25 mg/l Mean · Lupsingen
Total hardness 25 °fH Mean · Lupsingen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 4419

Frequently asked questions about drinking water in Lupsingen

How hard is the water in Lupsingen?
Wasserversorgung Lupsingen publishes a total hardness of 25 °fH for the supply zone Lupsingen — that corresponds to 14 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Lupsingen?
Wasserversorgung Lupsingen publishes a nitrate value of 10.7 mg/l for the supply zone Lupsingen. The statutory parametric value is 40 mg/l; the measured value represents 27 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Lupsingen?
Wasserversorgung Lupsingen. The values shown here come from the supply zone Lupsingen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.