Skip to content
maunawai.info

Drinking water in Luckau

6 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
2
Hardness range 8,50
Key values Bornsdorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 0,50 mg/l 50 mg/l
1 %
Mean · Bornsdorf
Show all recorded parameters (7 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Bornsdorf
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,14 mg/l 1.5 mg/l
9 %
Mean · Bornsdorf
Nitrate 0,50 mg/l 50 mg/l
1 %
Mean · Bornsdorf

Indicator parameters (3)

Indicator parameters – Bornsdorf
Parameter Value Parametric value Share of the parametric value Reference
Iron 0,060 mg/l 0.2 mg/l
30 %
Mean · Bornsdorf
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Mean · Bornsdorf
pH 7,41 6,5–9,5 Mean · Bornsdorf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (2)

Further parameters – Bornsdorf
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 8,50 ° dH Mean · Bornsdorf
Total hardness 2 Mean · Bornsdorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.tazv-luckau.de/wp-content/uploads/2020/04/Kundeninformation_Trinkwasser_2020_Homepage.pdf · 2018/2019 (Durchschnittswerte) · retrieved on 11/07/2026

Postcodes in this zone: 29487

Show 5 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
2
Hardness range 9,40
Key values Dahme
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 0,50 mg/l
below limit of quantification
50 mg/l
< 1 % *
Mean · Dahme

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (7 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Dahme
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,27 mg/l 1.5 mg/l
18 %
Mean · Dahme
Nitrate < 0,50 mg/l
below limit of quantification
50 mg/l
< 1 % *
Mean · Dahme

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (3)

Indicator parameters – Dahme
Parameter Value Parametric value Share of the parametric value Reference
Iron 0,030 mg/l 0.2 mg/l
15 %
Mean · Dahme
Manganese 0,010 mg/l 50 µg/l
20 %
Mean · Dahme
pH 7,73 6,5–9,5 Mean · Dahme

Further parameters (2)

Further parameters – Dahme
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 9,40 ° dH Mean · Dahme
Total hardness 2 Mean · Dahme

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.tazv-luckau.de/wp-content/uploads/2020/04/Kundeninformation_Trinkwasser_2020_Homepage.pdf · 2018/2019 (Durchschnittswerte) · retrieved on 11/07/2026

Postcodes in this zone: 29487

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
2
Hardness range 10,32
Key values Groß Ziescht
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 0,50 mg/l
below limit of quantification
50 mg/l
< 1 % *
Mean · Groß Ziescht

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (7 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Groß Ziescht
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0,10 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Groß Ziescht
Nitrate < 0,50 mg/l
below limit of quantification
50 mg/l
< 1 % *
Mean · Groß Ziescht

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (3)

Indicator parameters – Groß Ziescht
Parameter Value Parametric value Share of the parametric value Reference
Iron 0,032 mg/l 0.2 mg/l
16 %
Mean · Groß Ziescht
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Mean · Groß Ziescht
pH 7,64 6,5–9,5 Mean · Groß Ziescht

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (2)

Further parameters – Groß Ziescht
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 10,32 ° dH Mean · Groß Ziescht
Total hardness 2 Mean · Groß Ziescht

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.tazv-luckau.de/wp-content/uploads/2020/04/Kundeninformation_Trinkwasser_2020_Homepage.pdf · 2018/2019 (Durchschnittswerte) · retrieved on 11/07/2026

Postcodes in this zone: 29487

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
2
Hardness range 9,55
Key values Schollen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 0,80 mg/l 50 mg/l
2 %
Mean · Schollen
Show all recorded parameters (7 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Schollen
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,31 mg/l 1.5 mg/l
21 %
Mean · Schollen
Nitrate 0,80 mg/l 50 mg/l
2 %
Mean · Schollen

Indicator parameters (3)

Indicator parameters – Schollen
Parameter Value Parametric value Share of the parametric value Reference
Iron 0,050 mg/l 0.2 mg/l
25 %
Mean · Schollen
Manganese 0,039 mg/l 50 µg/l
78 %
Mean · Schollen
pH 7,73 6,5–9,5 Mean · Schollen

Further parameters (2)

Further parameters – Schollen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 9,55 ° dH Mean · Schollen
Total hardness 2 Mean · Schollen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.tazv-luckau.de/wp-content/uploads/2020/04/Kundeninformation_Trinkwasser_2020_Homepage.pdf · 2018/2019 (Durchschnittswerte) · retrieved on 11/07/2026

Postcodes in this zone: 29487

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
1
Hardness range 7,84
Key values Schrakau
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 1,00 mg/l
below limit of quantification
50 mg/l
< 2 % *
Mean · Schrakau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (7 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Schrakau
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0,05 mg/l
below limit of quantification
1.5 mg/l
< 3 % *
Mean · Schrakau
Nitrate < 1,00 mg/l
below limit of quantification
50 mg/l
< 2 % *
Mean · Schrakau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (3)

Indicator parameters – Schrakau
Parameter Value Parametric value Share of the parametric value Reference
Iron 0,020 mg/l 0.2 mg/l
10 %
Mean · Schrakau
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Mean · Schrakau
pH 7,70 6,5–9,5 Mean · Schrakau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (2)

Further parameters – Schrakau
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 7,84 ° dH Mean · Schrakau
Total hardness 1 Mean · Schrakau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.tazv-luckau.de/wp-content/uploads/2020/04/Kundeninformation_Trinkwasser_2020_Homepage.pdf · 2018/2019 (Durchschnittswerte) · retrieved on 11/07/2026

Postcodes in this zone: 29487

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
3
Hardness range 17,10
Key values Sellendorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 0,40 mg/l 50 mg/l
0.8 %
Mean · Sellendorf
Show all recorded parameters (7 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Sellendorf
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,10 mg/l 1.5 mg/l
7 %
Mean · Sellendorf
Nitrate 0,40 mg/l 50 mg/l
0.8 %
Mean · Sellendorf

Indicator parameters (3)

Indicator parameters – Sellendorf
Parameter Value Parametric value Share of the parametric value Reference
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean · Sellendorf
Manganese 0,010 mg/l 50 µg/l
20 %
Mean · Sellendorf
pH 7,56 6,5–9,5 Mean · Sellendorf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (2)

Further parameters – Sellendorf
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 17,10 ° dH Mean · Sellendorf
Total hardness 3 Mean · Sellendorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.tazv-luckau.de/wp-content/uploads/2020/04/Kundeninformation_Trinkwasser_2020_Homepage.pdf · 2018/2019 (Durchschnittswerte) · retrieved on 11/07/2026

Postcodes in this zone: 29487

Frequently asked questions about drinking water in Luckau

How hard is the water in Luckau?
Trink- und Abwasserzweckverband (TAZV) Luckau publishes the hardness range 8,50 for the supply zone Bornsdorf. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Luckau?
Trink- und Abwasserzweckverband (TAZV) Luckau publishes a nitrate value of 0,50 mg/l for the supply zone Bornsdorf. The statutory parametric value is 50 mg/l; the measured value represents 1 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Luckau?
Trink- und Abwasserzweckverband (TAZV) Luckau. The values shown here come from the supply zone Bornsdorf and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.