Drinking water in Lobbach
One supply zone, water supplier: Gemeinde Lobbach.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Lobenfeld (Entnahmestelle Rathaus, Keller, Hauseintritt Kaltwasser), Trinkwasser Netz Gemeinde Lobbach
Gemeinde LobbachAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 23/05/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 5,9 mg/l | 50 mg/l | 12 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 2,1 mg/l | 250 mg/l | 0.8 % | Single value |
| Sodium | 1,9 mg/l | 200 mg/l | 1 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (50 — most recent value per parameter)
Chemical parameters (30)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| 2,6-Dichlorobenzamide (BAM) | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Antimony | <0,0010 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | 0,0020 mg/l | 10 µg/l | 20 % | Single value |
| Atrazine | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Benzene | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Benzo(a)pyrene | <0,0000025 mg/l below limit of quantification | 10 ng/l | < 25 % * | Single value |
| Bromate | <0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Cadmium | <0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| Chromium | <0,00050 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | 0,006 mg/l | 2 mg/l | 0.3 % | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Desethylatrazine | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,096 mg/l | 1.5 mg/l | 6 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | <0,00010 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metazachlor | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Metolachlor | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Nickel | <0,002 mg/l below limit of quantification | 20 µg/l | < 10 % * | Single value |
| Nitrate | 5,9 mg/l | 50 mg/l | 12 % | Single value |
| Nitrite | <0,010 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Selenium | <0,0010 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Simazine | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,000025 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | <0,0001 mg/l below limit of quantification | 10 µg/l | < 1 % * | Single value |
| Trichloroethene | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | <0,0001 mg/l below limit of quantification | 50 µg/l | < 0.2 % * | Single value |
| Uranium | <0,00020 mg/l below limit of quantification | 10 µg/l | < 2 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | <0,050 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value |
| Calcite dissolution capacity | 1,6 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 3,2 mg/l | 250 mg/l | 1 % | Single value |
| Iron | <0,020 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Oxidisability | - mg/l O2 not determined | 5 mg/l O2 | — | Single value |
| pH | 7,7 | 6,5–9,5 | — | Single value |
| Sodium | 1,9 mg/l | 200 mg/l | 1 % | Single value |
| Sulphate | 2,1 mg/l | 250 mg/l | 0.8 % | Single value |
| Temperature | 11,3 °C | — | — | Single value |
| Total organic carbon (TOC) | <0,20 mg/l C below limit of quantification | ohne anormale Veränderung | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,32 mmol/l | — | — | Single value |
| Calcium | 40 mg/l | — | — | Single value |
| Carbonate hardness | 6,50 °dH | — | — | Single value |
| Hardness range (WRMG) | weich | — | — | Single value |
| Magnesium | 4,8 mg/l | — | — | Single value |
| Potassium | 1,3 mg/l | — | — | Single value |
| Sum of alkaline earth metals | 1,19 mmol/l | — | — | Single value |
| Total hardness | 6,66 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 74931
Frequently asked questions about drinking water in Lobbach
- How hard is the water in Lobbach?
- Gemeinde Lobbach publishes a total hardness of 6.7 °dH for the supply zone Lobenfeld (Entnahmestelle Rathaus, Keller, Hauseintritt Kaltwasser), Trinkwasser Netz Gemeinde Lobbach (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 23.05.2023, retrieved on 27/07/2026.
- How much nitrate is in the drinking water in Lobbach?
- Gemeinde Lobbach publishes a nitrate value of 5,9 mg/l for the supply zone Lobenfeld (Entnahmestelle Rathaus, Keller, Hauseintritt Kaltwasser), Trinkwasser Netz Gemeinde Lobbach. The statutory parametric value is 50 mg/l; the measured value represents 12 % of the parametric value. Basis: 23.05.2023, retrieved on 27/07/2026.
- Who supplies the drinking water in Lobbach?
- Gemeinde Lobbach. The values shown here come from the supply zone Lobenfeld (Entnahmestelle Rathaus, Keller, Hauseintritt Kaltwasser), Trinkwasser Netz Gemeinde Lobbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.