Drinking water in Limbach
2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
VB Rumpfen-Steinbach, HB Rumpfen, TW, (n. INKA)
Stadtwerke Buchen GmbH & Co. KGAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
Hardness range 10,7
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | 0,0000 µg/L | 0.1 µg/l | 0 % | Single value |
| Nitrate | 2,5 mg/L | 50 mg/l | 5 % | Single value |
| Sulphate | 9,6 mg/L | 250 mg/l | 4 % | Single value |
| Sodium | 2,7 mg/L | 200 mg/l | 1 % | Single value |
Show all recorded parameters (69 — most recent value per parameter)
Chemical parameters (43)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < BG µg/L below limit of quantification | 3 µg/l | < 3 % * | Single value |
| 2,6-Dichlorobenzamide (BAM) | < BG µg/L below limit of quantification | — | — | Single value |
| Atrazine | < BG µg/L below limit of quantification | — | — | Single value |
| Benzene | < BG µg/L below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Boron | < BG mg/L below limit of quantification | 1 mg/l | < 2 % * | Single value |
| Bromacil | < BG µg/L below limit of quantification | — | — | Single value |
| Carbetamide | < BG µg/L below limit of quantification | — | — | Single value |
| Chloridazon | < BG µg/L below limit of quantification | — | — | Single value |
| Chlorotoluron | < BG µg/L below limit of quantification | — | — | Single value |
| Chromium | < BG mg/L below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Cyanazine | < BG µg/L below limit of quantification | — | — | Single value |
| Cyanide | < BG mg/L below limit of quantification | 50 µg/l | < 20 % * | Single value |
| Desethylatrazine | < BG µg/L below limit of quantification | — | — | Single value |
| Desethylterbuthylazine | < BG µg/L below limit of quantification | — | — | Single value |
| Diuron | < BG µg/L below limit of quantification | — | — | Single value |
| Fluoride | 0,14 mg/L | 1.5 mg/l | 9 % | Single value |
| Hexazinone | < BG µg/L below limit of quantification | — | — | Single value |
| Isoproturon | < BG µg/L below limit of quantification | — | — | Single value |
| Lenacil | < BG µg/L below limit of quantification | — | — | Single value |
| Mercury | < BG mg/L below limit of quantification | 1 µg/l | < 5 % * | Single value |
| Metalaxyl | < BG µg/L below limit of quantification | — | — | Single value |
| Metamitron | < BG µg/L below limit of quantification | — | — | Single value |
| Metazachlor | < BG µg/L below limit of quantification | — | — | Single value |
| Methabenzthiazuron | < BG µg/L below limit of quantification | — | — | Single value |
| Metobromuron | < BG µg/L below limit of quantification | — | — | Single value |
| Metoxuron | < BG µg/L below limit of quantification | — | — | Single value |
| Metribuzin | < BG µg/L below limit of quantification | — | — | Single value |
| Nitrate | 2,5 mg/L | 50 mg/l | 5 % | Single value |
| Nitrite | < BG mg/L below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Pendimethalin | < BG µg/L below limit of quantification | — | — | Single value |
| Prometryn | < BG µg/L below limit of quantification | — | — | Single value |
| Propazine | < BG µg/L below limit of quantification | — | — | Single value |
| Sebuthylazine | < BG µg/L below limit of quantification | — | — | Single value |
| Selenium | < BG mg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Simazine | < BG µg/L below limit of quantification | — | — | Single value |
| Terbuthylazine | < BG µg/L below limit of quantification | — | — | Single value |
| Terbutryn | < BG µg/L below limit of quantification | — | — | Single value |
| Tetrachloroethene | < BG µg/L below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | 0,000 µg/L | 10 µg/l | 0 % | Single value |
| Tri-allate | < BG µg/L below limit of quantification | — | — | Single value |
| Triadimenol | < BG µg/L below limit of quantification | — | — | Single value |
| Trichloroethene | < BG µg/L below limit of quantification | — | — | Single value |
| Uranium | 0,0026 mg/L | 10 µg/l | 26 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of 4 PFAS | 0,0000 µg/L | — | — | Single value |
| Sum of PFAS | 0,0000 µg/L | 0.1 µg/l | 0 % | Single value |
Indicator parameters (13)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < BG mg/L below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Ammonium | < BG mg/L below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Calcite dissolution capacity | < BG mg/L below limit of quantification | 5 mg/l CaCO3 | — | Single value |
| Chloride | 3,6 mg/L | 250 mg/l | 1 % | Single value |
| Colour | ohne - | 0.5 m⁻¹ | — | Single value |
| Iron | < BG mg/L below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | < BG mg/L below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Odour | ohne - | für den Verbraucher annehmbar | — | Single value |
| pH | 7,95 - | 6,5–9,5 | — | Single value |
| Sodium | 2,7 mg/L | 200 mg/l | 1 % | Single value |
| Sulphate | 9,6 mg/L | 250 mg/l | 4 % | Single value |
| Total organic carbon (TOC) | 0,37 mg/L | ohne anormale Veränderung | — | Single value |
| Turbidity | - FNU not determined | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 3,59 mmol/L | — | — | Single value |
| Base capacity to pH 8.2 | 0,066 mmol/L | — | — | Single value |
| Calcite precipitation capacity | 10 mg/L | — | — | Single value |
| Calcium | 44,5 mg/L | — | — | Single value |
| Hardness range (WRMG) | 10,7 ° dH | — | — | Single value |
| Magnesium | 19,4 mg/L | — | — | Single value |
| Oxygen | 11,0 mg/L | — | — | Single value |
| Phosphate | 0,11 mg/L | — | — | Single value |
| Potassium | 1,4 mg/L | — | — | Single value |
| Saturation index | 0,37 - | — | — | Single value |
| Silicate / silicic acid | 8,3 mg/L | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.stadtwerke-buchen.de/images/Downloads/03_Wasser/Wasserqualit%C3%A4t/Mudau/Trinkwasseranalyse%20Hochbeh%C3%A4lter%20Rumpfen.pdf · Untersuchungsende, Karlsruhe, den 21.04.2026 · Probenahme: 10.03.2026 · retrieved on 11/07/2026
Postcodes in this zone: 74838
Show 1 more supply zone
Wasserwerk Sipplinger Berg
Zweckverband Bodensee-WasserversorgungAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2020. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
Water hardness
Hardness range mittel
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 4,0 mg/L | 50 mg/l | 8 % | Mean |
| Lead | <0,0005 mg/L below limit of quantification | 10 µg/l | < 5 % * | Mean |
| Escherichia coli (E. coli) | n.n. Anzahl/100 mL not detectable | 0/100 ml | — | Mean |
| Sulphate | 34 mg/L | 250 mg/l | 14 % | Mean |
| Sodium | 5,6 mg/L | 200 mg/l | 3 % | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (69 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | n.n. Anzahl/100 mL not detectable | 0/100 ml | — | Mean |
| Intestinal enterococci | n.n. Anzahl/100 mL not detectable | 0/100 ml | — | Mean |
Chemical parameters (34)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < 0,0003 mg/L below limit of quantification | 3 µg/l | < 10 % * | Mean |
| Acrylamide | n.d. mg/L not determined | 0.1 µg/l | — | Mean |
| Antimony | 0,00011 mg/L | 5 µg/l | 2 % | Mean |
| Arsenic | 0,00062 mg/L | 10 µg/l | 6 % | Mean |
| Benzene | < 0,00025 mg/L below limit of quantification | 1 µg/l | < 25 % * | Mean |
| Benzo(a)pyrene | < 0,0000025 mg/L below limit of quantification | 10 ng/l | < 25 % * | Mean |
| Benzo(b)fluoranthene | < 0,00001 mg/L below limit of quantification | — | — | Mean |
| Benzo(ghi)perylene | < 0,00001 mg/L below limit of quantification | — | — | Mean |
| Benzo(k)fluoranthene | < 0,00001 mg/L below limit of quantification | — | — | Mean |
| Boron | 0,011 mg/L | 1 mg/l | 1 % | Mean |
| Bromate | 0,0034 mg/L | 10 µg/l | 34 % | Mean |
| Bromodichloromethane | < 0,001 mg/L below limit of quantification | — | — | Mean |
| Cadmium | < 0,00005 mg/L below limit of quantification | 3 µg/l | < 2 % * | Mean |
| Chromium | 0,00012 mg/L | 25 µg/l | 0.5 % | Mean |
| Copper | 0,00042 mg/L | 2 mg/l | < 0.1 % | Mean |
| Cyanide | < 0,002 mg/L below limit of quantification | 50 µg/l | < 4 % * | Mean |
| Dibromochloromethane | < 0,001 mg/L below limit of quantification | — | — | Mean |
| Epichlorohydrin | n.d. mg/L not determined | 0.1 µg/l | — | Mean |
| Fluoride | 0,10 mg/L | 1.5 mg/l | 7 % | Mean |
| Indeno(1,2,3-cd)pyrene | < 0,00001 mg/L below limit of quantification | — | — | Mean |
| Lead | <0,0005 mg/L below limit of quantification | 10 µg/l | < 5 % * | Mean |
| Mercury | < 0,00005 mg/L below limit of quantification | 1 µg/l | < 5 % * | Mean |
| Nickel | < 0,0005 mg/L below limit of quantification | 20 µg/l | < 3 % * | Mean |
| Nitrate | 4,0 mg/L | 50 mg/l | 8 % | Mean |
| Nitrite | < 0,005 mg/L below limit of quantification | 0.5 mg/l | < 1 % * | Mean |
| Pesticides — Total | n.n. mg/L not detectable | 0.5 µg/l | — | Mean |
| Polycyclic aromatic hydrocarbons | n.n. mg/L not detectable | 0.1 µg/l | — | Mean |
| Selenium | < 0,001 mg/L below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Tetrachloroethene and Trichloroethene (sum) | n.n. mg/L not detectable | 10 µg/l | — | Mean |
| Tribromomethane (bromoform) | < 0,001 mg/L below limit of quantification | — | — | Mean |
| Trichloromethane (chloroform) | < 0,001 mg/L below limit of quantification | — | — | Mean |
| Trihalomethanes — Total | n.n. mg/L not detectable | 50 µg/l | — | Mean |
| Uranium | 0,0010 mg/L | 10 µg/l | 10 % | Mean |
| Vinyl chloride | n.d. mg/L not determined | 0.5 µg/l | — | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (18)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,010 mg/L below limit of quantification | 0.2 mg/l | < 5 % * | Mean |
| Ammonium | < 0,010 mg/L below limit of quantification | 0.5 mg/l | < 2 % * | Mean |
| Calcite dissolution capacity | -3,4 mg/L CaCo₃ | 5 mg/l CaCO3 | — | Mean |
| Chloride | 7,7 mg/L | 250 mg/l | 3 % | Mean |
| Coliform bacteria | n.n. Anzahl/100 mL not detectable | 0/100 ml | — | Mean |
| Colony count 22 °C | n.n. Anzahl/mL not detectable | ohne anormale Veränderung | — | Mean |
| Colony count 36 °C | n.n. Anzahl/mL not detectable | ohne anormale Veränderung | — | Mean |
| Colour | < 0,020 1/m below limit of quantification | 0.5 m⁻¹ | — | Mean |
| Conductivity (25 °C) | 336 µS/cm | 2,790 µS/cm | — | Mean |
| Iron | 0,0056 mg/L | 0.2 mg/l | 3 % | Mean |
| Manganese | < 0,0005 mg/L below limit of quantification | 50 µg/l | < 1 % * | Mean |
| Odour | 1 bei 25°C TON | für den Verbraucher annehmbar | — | Mean |
| pH | 8,01 / 8°C pH-Einheiten | 6,5–9,5 | — | Mean |
| Sodium | 5,6 mg/L | 200 mg/l | 3 % | Mean |
| Sulphate | 34 mg/L | 250 mg/l | 14 % | Mean |
| Taste | neutral | für den Verbraucher annehmbar | — | Mean |
| Total organic carbon (TOC) | 0,93 mg/L | ohne anormale Veränderung | — | Mean |
| Turbidity | < 0,05 NTU below limit of quantification | 1 NTU | — | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Radiology (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Gross alpha activity | 0,040 Bq/L | — | — | Mean |
| Indicative dose | n.d. mSv/Jahr not determined | 0.1 mSv/a | — | Mean |
| Radon-222 | < 0,10 Bq/L below limit of quantification | 100 Bq/l | — | Mean |
| Tritium | n.d. Bq/L not determined | 100 Bq/l | — | Mean |
Further parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Barium | 0,025 mg/L | — | — | Mean |
| Calcium | 50 mg/L | — | — | Mean |
| Carbonate hardness | 7,17 °dH | — | — | Mean |
| Hardness range (WRMG) | mittel | — | — | Mean |
| Lithium | 0,0021 mg/L | — | — | Mean |
| Magnesium | 8,5 mg/L | — | — | Mean |
| Oxygen | 16,8 mg/L | — | — | Mean |
| Phosphate | < 0,003 mg/L below limit of quantification | — | — | Mean |
| Potassium | 1,4 mg/L | — | — | Mean |
| Silicate / silicic acid | 1,7 mg/L | — | — | Mean |
| Strontium | 0,47 mg/L | — | — | Mean |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.bodensee-wasserversorgung.de/fileadmin/user_upload/Jahresmittelwerte_2020_V02.pdf · Jahresmittelwerte 2020 · retrieved on 08/07/2026
Postcodes in this zone: 74838
Frequently asked questions about drinking water in Limbach
- How hard is the water in Limbach?
- Stadtwerke Buchen GmbH & Co. KG publishes the hardness range 10,7 for the supply zone VB Rumpfen-Steinbach, HB Rumpfen, TW, (n. INKA). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Untersuchungsende, Karlsruhe, den 21.04.2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Limbach?
- Stadtwerke Buchen GmbH & Co. KG publishes a nitrate value of 2,5 mg/L for the supply zone VB Rumpfen-Steinbach, HB Rumpfen, TW, (n. INKA). The statutory parametric value is 50 mg/l; the measured value represents 5 % of the parametric value. Basis: Untersuchungsende, Karlsruhe, den 21.04.2026, retrieved on 11/07/2026.
- Are PFAS detectable in the drinking water in Limbach?
- Stadtwerke Buchen GmbH & Co. KG publishes for the supply zone VB Rumpfen-Steinbach, HB Rumpfen, TW, (n. INKA) a sum value PFAS-20 of 0,0000 µg/L. The statutory parametric value is 0.1 µg/l; the measured value represents 0 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Untersuchungsende, Karlsruhe, den 21.04.2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Limbach?
- Stadtwerke Buchen GmbH & Co. KG. The values shown here come from the supply zone VB Rumpfen-Steinbach, HB Rumpfen, TW, (n. INKA) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.