Skip to content
maunawai.info

Drinking water in Lienz, Rüthi (Rheintal)

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.9 °dH
Hardness range hard
Key values Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.5 mg/l 40 mg/l
14 %
Mean · Altstätten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Altstätten
Sulphate 12.7 mg/l Mean · Altstätten
Sodium 6.8 mg/l 200 mg/l
3 %
Mean · Altstätten
Show all recorded parameters (17 — most recent value per parameter)

Microbiology (3)

Microbiology – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 9.3 KBE/ml 300 1/ml Mean · Altstätten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Altstätten
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Altstätten

Chemical parameters (2)

Chemical parameters – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.2 mg/l 1.5 mg/l
13 %
Mean · Altstätten
Nitrate 5.5 mg/l 40 mg/l
14 %
Mean · Altstätten

Indicator parameters (7)

Indicator parameters – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Chloride 8.1 mg/l Mean · Altstätten
Conductivity (25 °C) 545.8 µS/cm Mean · Altstätten
pH 7.7 Mean · Altstätten
Sodium 6.8 mg/l 200 mg/l
3 %
Mean · Altstätten
Sulphate 12.7 mg/l Mean · Altstätten
Temperature 12.1 °C Mean · Altstätten
Turbidity 0.1 TE/F Mean · Altstätten

Further parameters (5)

Further parameters – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Calcium 76.2 mg/l Mean · Altstätten
Hydrogen carbonate 348.3 mg/l Mean · Altstätten
Magnesium 18.4 mg/l Mean · Altstätten
Potassium 1.5 mg/l Mean · Altstätten
Total hardness 26.6 °fH Mean · Altstätten

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/901/wasserwerk-altstatten/3680/altstatten · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 9464

Show 2 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.9 °dH
Hardness range medium
Key values Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.1 mg/l 40 mg/l
13 %
Mean · Lienz / Plona
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lienz / Plona
Sulphate 3.6 mg/l Mean · Lienz / Plona
Sodium 0.6 mg/l 200 mg/l
0.3 %
Mean · Lienz / Plona
Show all recorded parameters (15 — most recent value per parameter)

Microbiology (3)

Microbiology – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 6.2 KBE/ml 300 1/ml Mean · Lienz / Plona
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lienz / Plona
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lienz / Plona

Chemical parameters (1)

Chemical parameters – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.1 mg/l 40 mg/l
13 %
Mean · Lienz / Plona

Indicator parameters (7)

Indicator parameters – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Chloride 0.8 mg/l Mean · Lienz / Plona
Conductivity (25 °C) 338.2 µS/cm Mean · Lienz / Plona
pH 7.9 Mean · Lienz / Plona
Sodium 0.6 mg/l 200 mg/l
0.3 %
Mean · Lienz / Plona
Sulphate 3.6 mg/l Mean · Lienz / Plona
Temperature 12.9 °C Mean · Lienz / Plona
Turbidity 0.1 TE/F Mean · Lienz / Plona

Further parameters (4)

Further parameters – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Calcium 67.4 mg/l Mean · Lienz / Plona
Magnesium 1.9 mg/l Mean · Lienz / Plona
Potassium 0.5 mg/l Mean · Lienz / Plona
Total hardness 17.6 °fH Mean · Lienz / Plona

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/901/wasserwerk-altstatten/3679/lienz-plona · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 9464

Rüthi

Rüthi

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
11 °dH
Hardness range medium
Key values Rüthi
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2.88 mg/l 40 mg/l
7 %
Mean · Rüthi
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Rüthi
Sulphate 21.89 mg/l Mean · Rüthi
Sodium 5.8 mg/l 200 mg/l
3 %
Mean · Rüthi
Show all recorded parameters (22 — most recent value per parameter)

Microbiology (3)

Microbiology – Rüthi
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3 KBE/ml 300 1/ml Mean · Rüthi
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Rüthi
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Rüthi

Chemical parameters (2)

Chemical parameters – Rüthi
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.3 mg/l 1.5 mg/l
20 %
Mean · Rüthi
Nitrate 2.88 mg/l 40 mg/l
7 %
Mean · Rüthi

Metabolites (2)

Metabolites – Rüthi
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0 µg/l 0.1 µg/l
0 %
Mean · Rüthi
Chlorothalonil metabolite R471811 0 µg/l 0.1 µg/l
0 %
Mean · Rüthi

Indicator parameters (9)

Indicator parameters – Rüthi
Parameter Value Parametric value Share of the parametric value Reference
Chloride 4.6 mg/l Mean · Rüthi
Conductivity (25 °C) 433 µS/cm Mean · Rüthi
Iron 0.001 mg/l 0.2 mg/l
0.5 %
Mean · Rüthi
Manganese 0.0002 mg/l 50 µg/l
0.4 %
Mean · Rüthi
pH 7.68 Mean · Rüthi
Sodium 5.8 mg/l 200 mg/l
3 %
Mean · Rüthi
Sulphate 21.89 mg/l Mean · Rüthi
Temperature 13.62 °C Mean · Rüthi
Turbidity 0.11 TE/F Mean · Rüthi

Further parameters (6)

Further parameters – Rüthi
Parameter Value Parametric value Share of the parametric value Reference
Calcium 72 mg/l Mean · Rüthi
Dissolved organic carbon (DOC) 0.27 mg/l Mean · Rüthi
Hydrogen carbonate 216.3 mg/l Mean · Rüthi
Magnesium 8.4 mg/l Mean · Rüthi
Potassium 0.92 mg/l Mean · Rüthi
Total hardness 19.6 °fH Mean · Rüthi

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/881/ruthi/868/ruthi · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 9464

Frequently asked questions about drinking water in Lienz, Rüthi (Rheintal)

How hard is the water in Lienz, Rüthi (Rheintal)?
Wasserwerk Altstätten publishes a total hardness of 26.6 °fH for the supply zone Altstätten — that corresponds to 14.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Lienz, Rüthi (Rheintal)?
Wasserwerk Altstätten publishes a nitrate value of 5.5 mg/l for the supply zone Altstätten. The statutory parametric value is 40 mg/l; the measured value represents 14 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Lienz, Rüthi (Rheintal)?
Wasserwerk Altstätten. The values shown here come from the supply zone Altstätten and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.