How hard is the water in Les Prés-d'Orvin, Orvin?

Commune municipale d'Orvin publishes a total hardness of 2.86 °fH for the supply zone Orvin — that corresponds to 1.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2026, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Les Prés-d'Orvin, Orvin?

Commune municipale d'Orvin publishes a nitrate value of 7.6 mg/l for the supply zone Orvin. The statutory parametric value is 40 mg/l; the measured value represents 19 % of the parametric value. Basis: 2026, retrieved on 07/08/2026.

Who supplies the drinking water in Les Prés-d'Orvin, Orvin?

Commune municipale d'Orvin. The values shown here come from the supply zone Orvin and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Les Prés-d'Orvin, Orvin

One supply zone, water supplier: Commune municipale d'Orvin.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Orvin

Commune municipale d'Orvin

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

1.6 °dH

Hardness range soft

Key values Orvin
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	7.6 mg/l	40 mg/l	19 %	Mean · Orvin
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Maximum · Median 0 · Orvin
Sulphate	1.7 mg/l	—	—	Mean · Orvin
Sodium	4.9 mg/l	200 mg/l	2 %	Mean · Orvin

Show all recorded parameters (14 — most recent value per parameter)

Microbiology (3)

Microbiology – Orvin
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	0 KBE/ml	300 1/ml	—	Mean · Orvin
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Maximum · Median 0 · Orvin
Intestinal enterococci	0 KBE/100ml	0/100 ml	—	Maximum · Median 0 · Orvin

Chemical parameters (2)

Chemical parameters – Orvin
Parameter	Value	Parametric value	Share of the parametric value	Reference
Fluoride	< 0.08 mg/l below limit of quantification	1.5 mg/l	< 5 % *	Mean · Orvin
Nitrate	7.6 mg/l	40 mg/l	19 %	Mean · Orvin

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – Orvin
Parameter	Value	Parametric value	Share of the parametric value	Reference
Chloride	6.8 mg/l	—	—	Mean · Orvin
Sodium	4.9 mg/l	200 mg/l	2 %	Mean · Orvin
Sulphate	1.7 mg/l	—	—	Mean · Orvin
Temperature	10.7 °C	—	—	Mean · Orvin
Turbidity	1.2 TE/F	—	—	Mean · Orvin

Further parameters (4)

Further parameters – Orvin
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	107.8 mg/l	—	—	Mean · Orvin
Magnesium	4.1 mg/l	—	—	Mean · Orvin
Potassium	0.9 mg/l	—	—	Mean · Orvin
Total hardness	2.86 °fH	—	—	Mean · Orvin

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1141/commune-municipale-dorvin/3444/orvin · 2026 · 2026 · retrieved on 07/08/2026

Postcodes in this zone: 2534

Frequently asked questions about drinking water in Les Prés-d'Orvin, Orvin

How hard is the water in Les Prés-d'Orvin, Orvin?: Commune municipale d'Orvin publishes a total hardness of 2.86 °fH for the supply zone Orvin — that corresponds to 1.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2026, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Les Prés-d'Orvin, Orvin?: Commune municipale d'Orvin publishes a nitrate value of 7.6 mg/l for the supply zone Orvin. The statutory parametric value is 40 mg/l; the measured value represents 19 % of the parametric value. Basis: 2026, retrieved on 07/08/2026.
Who supplies the drinking water in Les Prés-d'Orvin, Orvin?: Commune municipale d'Orvin. The values shown here come from the supply zone Orvin and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.