Skip to content
maunawai.info

Drinking water in Lengdorf

One supply zone, water supplier: Gemeinde Lengdorf.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 12/09/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
16 °dH
Hardness range hart
Key values Brunnen I
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 21 mg/l 50 mg/l
42 %
Single value · Brunnen I
Sulphate 18 mg/l 250 mg/l
7 %
Single value · Brunnen I
Sodium 5,3 mg/l 200 mg/l
3 %
Single value · Brunnen I
Show all recorded parameters (24 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Brunnen I
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 21 mg/l 50 mg/l
42 %
Single value · Brunnen I

Indicator parameters (11)

Indicator parameters – Brunnen I
Parameter Value Parametric value Share of the parametric value Reference
Calcite dissolution capacity -12 mg/l 5 mg/l CaCO3 Single value · Brunnen I
Chloride 12,8 mg/l 250 mg/l
5 %
Single value · Brunnen I
Colour farblos
Unit not stated in the document
0.5 m⁻¹ Single value · Brunnen I
Conductivity (25 °C) 532 µS/cm 2,790 µS/cm Single value · Brunnen I
Odour ohne für den Verbraucher annehmbar Single value · Brunnen I
pH 7,52 6,5–9,5 Single value · Brunnen I
Sodium 5,3 mg/l 200 mg/l
3 %
Single value · Brunnen I
Sulphate 18 mg/l 250 mg/l
7 %
Single value · Brunnen I
Taste ohne für den Verbraucher annehmbar Single value · Brunnen I
Temperature 11,8 °C Single value · Brunnen I
Turbidity klar
Unit not stated in the document
1 NTU Single value · Brunnen I

Further parameters (12)

Further parameters – Brunnen I
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 4,98 mmol/l Single value · Brunnen I
Base capacity to pH 8.2 0,26 mmol/l Single value · Brunnen I
Calcium 75,9 mg/l Single value · Brunnen I
Carbonate hardness 13,8 °dH Single value · Brunnen I
Dissolved organic carbon (DOC) <0,5 mg/l
below limit of quantification
Single value · Brunnen I
Free carbon dioxide 16 mg/l Single value · Brunnen I
Hardness range (WRMG) hart Single value · Brunnen I
Magnesium 23,2 mg/l Single value · Brunnen I
Oxygen 5,6 mg/l Single value · Brunnen I
Phosphate <0,05 mg/l
below limit of quantification
Single value · Brunnen I
Potassium 0,9 mg/l Single value · Brunnen I
Total hardness 2,85 mmol/l Single value · Brunnen I

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.lengdorf.de/fileadmin/Gemeinde/Weitere/2024_Pr%C3%BCfberichte_Brunnen.pdf · 18.09.2024 · Probenahme 12.09.2024 · retrieved on 08/08/2026

Postcodes in this zone: 84435

Frequently asked questions about drinking water in Lengdorf

How hard is the water in Lengdorf?
Gemeinde Lengdorf publishes a total hardness of 2,85 mmol/l for the supply zone Brunnen I — that corresponds to 16 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 18.09.2024, retrieved on 08/08/2026.
How much nitrate is in the drinking water in Lengdorf?
Gemeinde Lengdorf publishes a nitrate value of 21 mg/l for the supply zone Brunnen I. The statutory parametric value is 50 mg/l; the measured value represents 42 % of the parametric value. Basis: 18.09.2024, retrieved on 08/08/2026.
Who supplies the drinking water in Lengdorf?
Gemeinde Lengdorf. The values shown here come from the supply zone Brunnen I and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.