Drinking water in Lavin
3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Lavin
Cumün da ZernezAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 1.3 mg/l | 40 mg/l | 3 % | Mean · Lavin |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Lavin |
Show all recorded parameters (7 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 1.25 KBE/ml | 300 1/ml | — | Mean · Lavin |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Lavin |
| Intestinal enterococci | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Lavin |
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 1.3 mg/l | 40 mg/l | 3 % | Mean · Lavin |
Further parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 9.3 mg/l | — | — | Mean · Lavin |
| Magnesium | 0.9 mg/l | — | — | Mean · Lavin |
| Total hardness | 2.7 °fH | — | — | Mean · Lavin |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 7543
Show 2 more supply zones
Ortsteil Eisenhüttl (P250409.01)
WVA Kukmirn (Marktgemeinde Kukmirn)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 20/05/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
Show all recorded parameters (18 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Intestinal enterococci | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
Indicator parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Colony count 22 °C | 3 in 1 ml | 100 1/ml | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Colony count 36 °C | 3 in 1 ml | 20 1/ml | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Conductivity (25 °C) | 432 µS/cm | 2,500 µS/cm | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Iron | 0,01 mg/l | 0.2 mg/l | 5 % | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Manganese | < 0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Odour | ohne Besonderheiten | — | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| pH | 7,7 | 6,5–9,5 | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Taste | ohne Besonderheiten | — | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Temperature | 11,7 °C | — | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Turbidity | keine | — | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 36 mg/l | 400 mg/l | 9 % | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Carbonate hardness | 8,0 °dH | — | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Hydrogen carbonate | 0 mg/l | — | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Magnesium | 13 mg/l | 150 mg/l | 9 % | Single value · Ortsteil Eisenhüttl (P250409.01) |
| Total hardness | 8,0 °dH | — | — | Single value · Ortsteil Eisenhüttl (P250409.01) |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 7543
Ortsteil Limbach (P250409.02)
WVA Kukmirn (Marktgemeinde Kukmirn)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 20/05/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Limbach (P250409.02) |
Show all recorded parameters (18 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Limbach (P250409.02) |
| Intestinal enterococci | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Limbach (P250409.02) |
Indicator parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 in 100 ml | 0/100 ml | — | Single value · Ortsteil Limbach (P250409.02) |
| Colony count 22 °C | 3 in 1 ml | 100 1/ml | — | Single value · Ortsteil Limbach (P250409.02) |
| Colony count 36 °C | 2 in 1 ml | 20 1/ml | — | Single value · Ortsteil Limbach (P250409.02) |
| Conductivity (25 °C) | 431 µS/cm | 2,500 µS/cm | — | Single value · Ortsteil Limbach (P250409.02) |
| Iron | < 0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value · Ortsteil Limbach (P250409.02) |
| Manganese | < 0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value · Ortsteil Limbach (P250409.02) |
| Odour | ohne Besonderheiten | — | — | Single value · Ortsteil Limbach (P250409.02) |
| pH | 7,7 | 6,5–9,5 | — | Single value · Ortsteil Limbach (P250409.02) |
| Taste | ohne Besonderheiten | — | — | Single value · Ortsteil Limbach (P250409.02) |
| Temperature | 16,5 °C | — | — | Single value · Ortsteil Limbach (P250409.02) |
| Turbidity | keine | — | — | Single value · Ortsteil Limbach (P250409.02) |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 36 mg/l | 400 mg/l | 9 % | Single value · Ortsteil Limbach (P250409.02) |
| Carbonate hardness | 8,0 °dH | — | — | Single value · Ortsteil Limbach (P250409.02) |
| Hydrogen carbonate | 0 mg/l | — | — | Single value · Ortsteil Limbach (P250409.02) |
| Magnesium | 13 mg/l | 150 mg/l | 9 % | Single value · Ortsteil Limbach (P250409.02) |
| Total hardness | 8,0 °dH | — | — | Single value · Ortsteil Limbach (P250409.02) |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 7543
Frequently asked questions about drinking water in Lavin
- How hard is the water in Lavin?
- Cumün da Zernez publishes a total hardness of 2.7 °fH for the supply zone Lavin — that corresponds to 1.5 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
- How much nitrate is in the drinking water in Lavin?
- Cumün da Zernez publishes a nitrate value of 1.3 mg/l for the supply zone Lavin. The statutory parametric value is 40 mg/l; the measured value represents 3 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
- Who supplies the drinking water in Lavin?
- Cumün da Zernez. The values shown here come from the supply zone Lavin and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.