Skip to content
maunawai.info

Drinking water in Lauf an der Pegnitz

One supply zone, water supplier: StWL Städtische Werke Lauf a.d. Pegnitz GmbH.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Wasserwerk Spitalwald (größerer Teil) und Wasserwerk Rudolfshof (kleinerer Teil) - Mischwasser Lauf a.d. Pegnitz

StWL Städtische Werke Lauf a.d. Pegnitz GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12.8 °dH
Hardness range medium
Key values Wasserwerk Spitalwald (größerer Teil) und Wasserwerk Rudolfshof (kleinerer Teil) - Mischwasser Lauf a.d. Pegnitz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2 - 3 mg/l 50 mg/l Single value
Lead < 0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Sulphate 17 – 59 mg/l 250 mg/l Single value
Sodium 23 - 82 mg/l 200 mg/l Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (29 — most recent value per parameter)

Chemical parameters (15)

Chemical parameters – Wasserwerk Spitalwald (größerer Teil) und Wasserwerk Rudolfshof (kleinerer Teil) - Mischwasser Lauf a.d. Pegnitz
Parameter Value Parametric value Share of the parametric value Reference
Antimony <0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic 0,003 - 0,004 mg/l 10 µg/l Single value
Benzo(a)pyrene < 0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Single value
Cadmium < 0,0009 mg/l
below limit of quantification
3 µg/l
< 30 % *
Single value
Chromium 0,0007 mg/l 25 µg/l
3 %
Single value
Copper <0,02 mg/l
below limit of quantification
2 mg/l
< 1 % *
Single value
Cyanide < 0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
Fluoride 0,2 - 0,6 mg/l 1.5 mg/l Single value
Lead < 0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Mercury < 0,0003 mg/l
below limit of quantification
1 µg/l
< 30 % *
Single value
Nickel < 0,005 mg/l
below limit of quantification
20 µg/l
< 25 % *
Single value
Nitrate 2 - 3 mg/l 50 mg/l Single value
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Trihalomethanes — Total nicht nachweisbar µg/l
not detectable
50 µg/l Single value
Uranium 2,1 – 4,2 µg/l 10 µg/l Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (10)

Indicator parameters – Wasserwerk Spitalwald (größerer Teil) und Wasserwerk Rudolfshof (kleinerer Teil) - Mischwasser Lauf a.d. Pegnitz
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,030 mg/l
below limit of quantification
0.2 mg/l
< 15 % *
Single value
Ammonium <0,10 mg/l
below limit of quantification
0.5 mg/l
< 20 % *
Single value
Chloride 47 – 126 mg/l 250 mg/l Single value
Conductivity (25 °C) 538 - 875 (bei 25°C) µS/cm bei 25 °C 2,790 µS/cm Single value
Iron 0,06 mg/l 0.2 mg/l
30 %
Single value
Manganese <0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
pH 7,5 - 7,71 6,5–9,5 Single value
Sodium 23 - 82 mg/l 200 mg/l Single value
Sulphate 17 – 59 mg/l 250 mg/l Single value
Temperature 6,7 – 15,4 °C Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Wasserwerk Spitalwald (größerer Teil) und Wasserwerk Rudolfshof (kleinerer Teil) - Mischwasser Lauf a.d. Pegnitz
Parameter Value Parametric value Share of the parametric value Reference
Calcium 50 - 61 mg/l Single value
Magnesium 19 - 22 mg/l Single value
Potassium 8,2 - 15,0 mg/l Single value
Total hardness 12,8 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 91207

Frequently asked questions about drinking water in Lauf an der Pegnitz

How hard is the water in Lauf an der Pegnitz?
StWL Städtische Werke Lauf a.d. Pegnitz GmbH publishes a total hardness of 12.8 °dH for the supply zone Wasserwerk Spitalwald (größerer Teil) und Wasserwerk Rudolfshof (kleinerer Teil) - Mischwasser Lauf a.d. Pegnitz (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 01/2026, retrieved on 11/07/2026.
Who supplies the drinking water in Lauf an der Pegnitz?
StWL Städtische Werke Lauf a.d. Pegnitz GmbH. The values shown here come from the supply zone Wasserwerk Spitalwald (größerer Teil) und Wasserwerk Rudolfshof (kleinerer Teil) - Mischwasser Lauf a.d. Pegnitz and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.