Skip to content
maunawai.info

Drinking water in Königstein im Taunus

One supply zone, water supplier: Stadtwerke Königstein im Taunus.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 25/06/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
5 °dH
Hardness range weich
Key values HZ Königstein
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 10,5 mg/l 50 mg/l
21 %
Single value
Lead 0,0018 mg/l 10 µg/l
18 %
Single value
Escherichia coli (E. coli) 0 MPN/100ml 0/100 ml Single value
Sulphate 9,3 mg/l 250 mg/l
4 %
Single value
Sodium 8,20 mg/l 200 mg/l
4 %
Single value
Show all recorded parameters (82 — most recent value per parameter)

Microbiology (2)

Microbiology – HZ Königstein
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (55)

Chemical parameters – HZ Königstein
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,10 µg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Antimony <0,000050 mg/l
below limit of quantification
5 µg/l
< 1 % *
Single value
Arsenic 0,00013 mg/l 10 µg/l
1 %
Single value
Atrazine <0,020 µg/l
below limit of quantification
Single value
Bentazone <0,02 µg/l
below limit of quantification
Single value
Benzene <0,10 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Benzo(a)pyrene <0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Single value
Benzo(b)fluoranthene <0,002 µg/l
below limit of quantification
Single value
Benzo(ghi)perylene <0,002 µg/l
below limit of quantification
Single value
Benzo(k)fluoranthene <0,002 µg/l
below limit of quantification
Single value
Bisphenol A <0,05 µg/l
below limit of quantification
2.5 µg/l
< 2 % *
Single value
Boron <0,010 mg/l
below limit of quantification
1 mg/l
< 1 % *
Single value
Bromacil <0,02 µg/l
below limit of quantification
Single value
Bromate <0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Bromodichloromethane <0,10 µg/l
below limit of quantification
Single value
Cadmium <0,000050 mg/l
below limit of quantification
3 µg/l
< 2 % *
Single value
Carbofuran <0,020 µg/l
below limit of quantification
Single value
Chlorotoluron <0,020 µg/l
below limit of quantification
Single value
Chromium 0,00022 mg/l 25 µg/l
0.9 %
Single value
Copper <0,0050 mg/l
below limit of quantification
2 mg/l
< 0.3 % *
Single value
Cyanide <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Desethylatrazine <0,020 µg/l
below limit of quantification
Single value
Desisopropylatrazine <0,020 µg/l
below limit of quantification
Single value
Dibromochloromethane <0,10 µg/l
below limit of quantification
Single value
Dichlorprop <0,03 µg/l
below limit of quantification
Single value
Diuron <0,020 µg/l
below limit of quantification
Single value
Epichlorohydrin <0,050 µg/l
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Fluoride <0,10 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value
Hexazinone <0,020 µg/l
below limit of quantification
Single value
Indeno(1,2,3-cd)pyrene <0,003 µg/l
below limit of quantification
Single value
Isoproturon <0,020 µg/l
below limit of quantification
Single value
Lead 0,0018 mg/l 10 µg/l
18 %
Single value
MCPA <0,02 µg/l
below limit of quantification
Single value
Mecoprop <0,02 µg/l
below limit of quantification
Single value
Mercury 0,000003 mg/l 1 µg/l
0.3 %
Single value
Metazachlor <0,020 µg/l
below limit of quantification
Single value
Methabenzthiazuron <0,020 µg/l
below limit of quantification
Single value
Metobromuron <0,020 µg/l
below limit of quantification
Single value
Monuron <0,020 µg/l
below limit of quantification
Single value
Nickel 0,00049 mg/l 20 µg/l
2 %
Single value
Nitrate 10,5 mg/l 50 mg/l
21 %
Single value
Nitrite <0,030 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value
Propazine <0,020 µg/l
below limit of quantification
Single value
Sebuthylazine <0,020 µg/l
below limit of quantification
Single value
Selenium 0,000071 mg/l 10 µg/l
0.7 %
Single value
Simazine <0,020 µg/l
below limit of quantification
Single value
Terbuthylazine <0,020 µg/l
below limit of quantification
Single value
Tetrachloroethene 0,12 µg/l Single value
Tetrachloroethene and Trichloroethene (sum) 0,12 µg/l 10 µg/l
1 %
Single value
Tribromomethane (bromoform) <0,10 µg/l
below limit of quantification
Single value
Trichloroethene <0,10 µg/l
below limit of quantification
Single value
Trichloromethane (chloroform) <0,10 µg/l
below limit of quantification
Single value
Trihalomethanes — Total n.b. µg/l
not determined
50 µg/l Single value
Uranium 0,00023 mg/l 10 µg/l
2 %
Single value
Vinyl chloride <0,20 µg/l
below limit of quantification
0.5 µg/l
< 40 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (17)

Indicator parameters – HZ Königstein
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,019 mg/l 0.2 mg/l
10 %
Single value
Ammonium <0,026 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value
Calcite dissolution capacity -5,2 mg/l 5 mg/l CaCO3 Single value
Chloride 20,6 mg/l 250 mg/l
8 %
Single value
Coliform bacteria 0 MPN/100ml 0/100 ml Single value
Colour <0,1 1/m
below limit of quantification
0.5 m⁻¹ Single value
Conductivity (25 °C) 231 µS/cm 2,790 µS/cm Single value
Iron <0,0050 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese <0,0010 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 8,88 6,5–9,5 Single value
Sodium 8,20 mg/l 200 mg/l
4 %
Single value
Sulphate 9,3 mg/l 250 mg/l
4 %
Single value
Taste neutral für den Verbraucher annehmbar Single value
Temperature 12,7 °C Single value
Total organic carbon (TOC) 0,26 mg/l ohne anormale Veränderung Single value
Turbidity <0,3 FNU
below limit of quantification
1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – HZ Königstein
Parameter Value Parametric value Share of the parametric value Reference
Calcium 26,1 mg/l Single value
Carbonate hardness 3,6 °dH Single value
Hardness range (WRMG) weich Single value
Hydrogen carbonate 77,4 mg/l Single value
Magnesium 6,01 mg/l Single value
Potassium 0,93 mg/l Single value
Silicate / silicic acid 9,99 mg/l Single value
Total hardness 5,04 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.koenigstein.de/dokumente/formulare/stadtwerke/wasseranalysen/2025/analyse-1-koenigstein-hz-mz-mammolshain-logostw.pdf · 27.06.2025 · Prüfzeitraum: 07.05.2025 bis 25.06.2025 · retrieved on 11/07/2026

Postcodes in this zone: 61462

Frequently asked questions about drinking water in Königstein im Taunus

How hard is the water in Königstein im Taunus?
Stadtwerke Königstein im Taunus publishes a total hardness of 5 °dH for the supply zone HZ Königstein (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 27.06.2025, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Königstein im Taunus?
Stadtwerke Königstein im Taunus publishes a nitrate value of 10,5 mg/l for the supply zone HZ Königstein. The statutory parametric value is 50 mg/l; the measured value represents 21 % of the parametric value. Basis: 27.06.2025, retrieved on 11/07/2026.
Who supplies the drinking water in Königstein im Taunus?
Stadtwerke Königstein im Taunus. The values shown here come from the supply zone HZ Königstein and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.