Drinking water in Ilmmünster
One supply zone, water supplier: Wasserzweckverband Paunzhausen.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Gemeinde Ilmmünster
Wasserzweckverband PaunzhausenAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | < 1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Single value |
| Sulphate | 18,0 mg/l | 250 mg/l | 7 % | Single value |
| Sodium | 6,5 mg/l | 200 mg/l | 3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (15 — most recent value per parameter)
Chemical parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Fluoride | 0,15 mg/l | 1.5 mg/l | 10 % | Single value |
| Nitrate | < 1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Single value |
| Nitrite | < 0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Uranium | 0,0002 mg/l | 10 µg/l | 2 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 1,2 mg/l | 250 mg/l | 0.5 % | Single value |
| Iron | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | < 0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| pH | 7,78 | 6,5–9,5 | — | Single value |
| Sodium | 6,5 mg/l | 200 mg/l | 3 % | Single value |
| Sulphate | 18,0 mg/l | 250 mg/l | 7 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 55,2 mg/l | — | — | Single value |
| Magnesium | 25,2 mg/l | — | — | Single value |
| Oxygen | 10,0 mg/l | — | — | Single value |
| Potassium | 1,1 mg/l | — | — | Single value |
| Total hardness | 13,5 (2,41 mmol/l) °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 85304
Frequently asked questions about drinking water in Ilmmünster
- How much nitrate is in the drinking water in Ilmmünster?
- Wasserzweckverband Paunzhausen publishes a nitrate value of < 1,0 mg/l for the supply zone Gemeinde Ilmmünster. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: 25.02.2026, retrieved on 08/08/2026.
- Who supplies the drinking water in Ilmmünster?
- Wasserzweckverband Paunzhausen. The values shown here come from the supply zone Gemeinde Ilmmünster and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.