Drinking water in Hunzenschwil
One supply zone, water supplier: Wasserversorgung Hunzenschwil.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Gemeinde Hunzenschwil
Wasserversorgung HunzenschwilAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 17.9 mg/l | 40 mg/l | 45 % | Mean · Gemeinde Hunzenschwil |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Gemeinde Hunzenschwil |
| Sulphate | 16.3 mg/l | — | — | Mean · Gemeinde Hunzenschwil |
| Sodium | 17.1 mg/l | 200 mg/l | 9 % | Mean · Gemeinde Hunzenschwil |
Show all recorded parameters (18 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 4.07 KBE/ml | 300 1/ml | — | Mean · Gemeinde Hunzenschwil |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Gemeinde Hunzenschwil |
| Intestinal enterococci | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Gemeinde Hunzenschwil |
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 17.9 mg/l | 40 mg/l | 45 % | Mean · Gemeinde Hunzenschwil |
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chlorothalonil metabolite R417888 | < 0.02 µg/l below limit of quantification | 0.1 µg/l | < 20 % * | Mean · Gemeinde Hunzenschwil |
| Chlorothalonil metabolite R471811 | 0.135 µg/l | 0.1 µg/l | 135 % Mean above the parametric value | Mean · Gemeinde Hunzenschwil |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.
Indicator parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 23.7 mg/l | — | — | Mean · Gemeinde Hunzenschwil |
| Conductivity (25 °C) | 662 µS/cm | — | — | Mean · Gemeinde Hunzenschwil |
| pH | 7.44 | — | — | Mean · Gemeinde Hunzenschwil |
| Sodium | 17.1 mg/l | 200 mg/l | 9 % | Mean · Gemeinde Hunzenschwil |
| Sulphate | 16.3 mg/l | — | — | Mean · Gemeinde Hunzenschwil |
| Temperature | 12.1 °C | — | — | Mean · Gemeinde Hunzenschwil |
| Turbidity | < 0.1 TE/F below limit of quantification | — | — | Mean · Gemeinde Hunzenschwil |
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 103 mg/l | — | — | Mean · Gemeinde Hunzenschwil |
| Dissolved organic carbon (DOC) | 0.37 mg/l | — | — | Mean · Gemeinde Hunzenschwil |
| Magnesium | 14.3 mg/l | — | — | Mean · Gemeinde Hunzenschwil |
| Potassium | 2.7 mg/l | — | — | Mean · Gemeinde Hunzenschwil |
| Total hardness | 31.7 °fH | — | — | Mean · Gemeinde Hunzenschwil |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 5502
Frequently asked questions about drinking water in Hunzenschwil
- How hard is the water in Hunzenschwil?
- Wasserversorgung Hunzenschwil publishes a total hardness of 31.7 °fH for the supply zone Gemeinde Hunzenschwil — that corresponds to 17.8 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
- How much nitrate is in the drinking water in Hunzenschwil?
- Wasserversorgung Hunzenschwil publishes a nitrate value of 17.9 mg/l for the supply zone Gemeinde Hunzenschwil. The statutory parametric value is 40 mg/l; the measured value represents 45 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
- Who supplies the drinking water in Hunzenschwil?
- Wasserversorgung Hunzenschwil. The values shown here come from the supply zone Gemeinde Hunzenschwil and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.