Drinking water in Hüttschlag
2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen)
DintikonAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 18.5 mg/l | 40 mg/l | 46 % | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
Show all recorded parameters (9 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 1.67 KBE/ml | 300 1/ml | — | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
| Intestinal enterococci | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 18.5 mg/l | 40 mg/l | 46 % | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chlorothalonil metabolite R417888 | 0.16 µg/l | 0.1 µg/l | 160 % Mean above the parametric value | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
| Chlorothalonil metabolite R471811 | 0.6 µg/l | 0.1 µg/l | 600 % Mean above the parametric value | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.
Further parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 113 mg/l | — | — | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
| Magnesium | 22 mg/l | — | — | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
| Total hardness | 36.4 °fH | — | — | Mean · Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 5612
Show 1 more supply zone
Villmergen / Hilfikon
Gemeindewerke VillmergenAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 17.53 mg/l | 40 mg/l | 44 % | Mean · Villmergen / Hilfikon |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Villmergen / Hilfikon |
| Sulphate | 18.61 mg/l | — | — | Mean · Villmergen / Hilfikon |
| Sodium | 8.19 mg/l | 200 mg/l | 4 % | Mean · Villmergen / Hilfikon |
Show all recorded parameters (18 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 2.72 KBE/ml | 300 1/ml | — | Mean · Villmergen / Hilfikon |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Villmergen / Hilfikon |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Villmergen / Hilfikon |
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 17.53 mg/l | 40 mg/l | 44 % | Mean · Villmergen / Hilfikon |
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chlorothalonil metabolite R417888 | 0.24 µg/l | 0.1 µg/l | 240 % Mean above the parametric value | Mean · Villmergen / Hilfikon |
| Chlorothalonil metabolite R471811 | 0.999 µg/l | 0.1 µg/l | 999 % Mean above the parametric value | Mean · Villmergen / Hilfikon |
Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.
Indicator parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 8.45 mg/l | — | — | Mean · Villmergen / Hilfikon |
| Conductivity (25 °C) | 656.06 µS/cm | — | — | Mean · Villmergen / Hilfikon |
| pH | 7.55 | — | — | Mean · Villmergen / Hilfikon |
| Sodium | 8.19 mg/l | 200 mg/l | 4 % | Mean · Villmergen / Hilfikon |
| Sulphate | 18.61 mg/l | — | — | Mean · Villmergen / Hilfikon |
| Temperature | 12.21 °C | — | — | Mean · Villmergen / Hilfikon |
| Turbidity | < 0.1 TE/F below limit of quantification | — | — | Mean · Villmergen / Hilfikon |
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 114.19 mg/l | — | — | Mean · Villmergen / Hilfikon |
| Dissolved organic carbon (DOC) | 0.39 mg/l | — | — | Mean · Villmergen / Hilfikon |
| Magnesium | 18.99 mg/l | — | — | Mean · Villmergen / Hilfikon |
| Potassium | 1.34 mg/l | — | — | Mean · Villmergen / Hilfikon |
| Total hardness | 32.28 °fH | — | — | Mean · Villmergen / Hilfikon |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 5612
Frequently asked questions about drinking water in Hüttschlag
- How hard is the water in Hüttschlag?
- Dintikon publishes a total hardness of 36.4 °fH for the supply zone Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) — that corresponds to 20.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
- How much nitrate is in the drinking water in Hüttschlag?
- Dintikon publishes a nitrate value of 18.5 mg/l for the supply zone Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen). The statutory parametric value is 40 mg/l; the measured value represents 46 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
- Who supplies the drinking water in Hüttschlag?
- Dintikon. The values shown here come from the supply zone Gemeinde Dintikon und Ballygebiet (Gemeinde Villmergen) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.