Skip to content
maunawai.info

Drinking water in Horgenzell

One supply zone, water supplier: Bürgermeisteramt Horgenzell.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Ortsnetz Kappel, Hochbehälter (Sattelbach)

Bürgermeisteramt Horgenzell

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 28/05/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
21.6 °dH
Hardness range hard
Key values Ortsnetz Kappel, Hochbehälter (Sattelbach)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15.2 mg/l 50 mg/l
30 %
Single value
Lead <0.0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Sulphate 8.3 mg/l 250 mg/l
3 %
Single value
Sodium 5.7 mg/l 200 mg/l
3 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (72 — most recent value per parameter)

Microbiology (2)

Microbiology – Ortsnetz Kappel, Hochbehälter (Sattelbach)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (44)

Chemical parameters – Ortsnetz Kappel, Hochbehälter (Sattelbach)
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0.3 µg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
2,6-Dichlorobenzamide (BAM) <0.02 µg/l
below limit of quantification
Single value
Antimony <0.001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0.0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Atrazine <0.02 µg/l
below limit of quantification
Single value
Benzene <0.25 µg/l
below limit of quantification
1 µg/l
< 25 % *
Single value
Benzo(a)pyrene <0.0025 µg/l
below limit of quantification
10 ng/l
< 25 % *
Single value
Benzo(b)fluoranthene <0.010 µg/l
below limit of quantification
Single value
Benzo(ghi)perylene <0.020 µg/l
below limit of quantification
Single value
Benzo(k)fluoranthene <0.010 µg/l
below limit of quantification
Single value
Bisphenol A <0.01 µg/l
below limit of quantification
2.5 µg/l
< 0.4 % *
Single value
Boron 0.02 mg/l 1 mg/l
2 %
Single value
Bromate - mg/l
not determined
10 µg/l Single value
Bromodichloromethane <0.1 µg/l
below limit of quantification
Single value
Cadmium <0.0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Chromium 0.0008 mg/l 25 µg/l
3 %
Single value
Copper <0.001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Single value
Cyanide <0.002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Desethylatrazine <0.02 µg/l
below limit of quantification
Single value
Desethylterbuthylazine <0.02 µg/l
below limit of quantification
Single value
Desisopropylatrazine <0.02 µg/l
below limit of quantification
Single value
Dibromochloromethane <0.1 µg/l
below limit of quantification
Single value
Hexazinone <0.02 µg/l
below limit of quantification
Single value
Indeno(1,2,3-cd)pyrene <0.010 µg/l
below limit of quantification
Single value
Lead <0.0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Mercury <0.0002 mg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Metazachlor <0.02 µg/l
below limit of quantification
Single value
Metolachlor <0.02 µg/l
below limit of quantification
Single value
Nickel <0.001 mg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Nitrate 15.2 mg/l 50 mg/l
30 %
Single value
Nitrite <0.01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Polycyclic aromatic hydrocarbons n.n. µg/l
not detectable
0.1 µg/l Single value
Propazine <0.02 µg/l
below limit of quantification
Single value
Selenium <0.001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine <0.02 µg/l
below limit of quantification
Single value
Terbuthylazine <0.02 µg/l
below limit of quantification
Single value
Tetrachloroethene <0.1 µg/l
below limit of quantification
Single value
Tetrachloroethene and Trichloroethene (sum) n.n. µg/l
not detectable
10 µg/l Single value
Tribromomethane (bromoform) <0.1 µg/l
below limit of quantification
Single value
Trichloroethene <0.1 µg/l
below limit of quantification
Single value
Trichloromethane (chloroform) <0.1 µg/l
below limit of quantification
Single value
Trihalomethanes — Total n.n. µg/l
not detectable
50 µg/l Single value
Uranium 0.0012 mg/l 10 µg/l
12 %
Single value
Vinyl chloride <0.25 µg/l
below limit of quantification
0.5 µg/l
< 50 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (18)

Indicator parameters – Ortsnetz Kappel, Hochbehälter (Sattelbach)
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0.005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Ammonium <0.01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Calcite dissolution capacity -38 mg/l 5 mg/l CaCO3 Single value
Chloride 5.1 mg/l 250 mg/l
2 %
Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 0 KBE/ml ohne anormale Veränderung Single value
Colony count 36 °C 0 KBE/ml ohne anormale Veränderung Single value
Colour farblos - 0.5 m⁻¹ Single value
Conductivity (25 °C) 727 µS/cm 2,790 µS/cm Single value
Iron <0.01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0.0025 mg/l
below limit of quantification
50 µg/l
< 5 % *
Single value
Odour o.B. - für den Verbraucher annehmbar Single value
Sodium 5.7 mg/l 200 mg/l
3 %
Single value
Sulphate 8.3 mg/l 250 mg/l
3 %
Single value
Taste - -
not determined
für den Verbraucher annehmbar Single value
Temperature 13.0 °C Single value
Total organic carbon (TOC) 1.0 mg/l ohne anormale Veränderung Single value
Turbidity 0.08 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Ortsnetz Kappel, Hochbehälter (Sattelbach)
Parameter Value Parametric value Share of the parametric value Reference
Calcium 127 mg/l Single value
Carbonate hardness 20.2 °dH Single value
Free carbon dioxide 47.9 mg/l Single value
Magnesium 14.2 mg/l Single value
Potassium 2.0 mg/l Single value
Saturation index +0,26 - Single value
Sum of alkaline earth metals 3.9 mmol/l Single value
Total hardness 21.6 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 88263

Frequently asked questions about drinking water in Horgenzell

How hard is the water in Horgenzell?
Bürgermeisteramt Horgenzell publishes a total hardness of 21.6 °dH for the supply zone Ortsnetz Kappel, Hochbehälter (Sattelbach) (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Überlingen, 9. 7. 2025, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Horgenzell?
Bürgermeisteramt Horgenzell publishes a nitrate value of 15.2 mg/l for the supply zone Ortsnetz Kappel, Hochbehälter (Sattelbach). The statutory parametric value is 50 mg/l; the measured value represents 30 % of the parametric value. Basis: Überlingen, 9. 7. 2025, retrieved on 13/07/2026.
Who supplies the drinking water in Horgenzell?
Bürgermeisteramt Horgenzell. The values shown here come from the supply zone Ortsnetz Kappel, Hochbehälter (Sattelbach) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.