Skip to content
maunawai.info

Drinking water in Hohenrain

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19.2 °dH
Hardness range hard
Key values Hohenrain
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 13 mg/l 40 mg/l
33 %
Single value · Hohenrain
Sulphate 11 mg/l Single value · Hohenrain
Show all recorded parameters (7 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Hohenrain
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil
not determined
Single value · Hohenrain
Nitrate 13 mg/l 40 mg/l
33 %
Single value · Hohenrain

Indicator parameters (2)

Indicator parameters – Hohenrain
Parameter Value Parametric value Share of the parametric value Reference
Chloride 6 mg/l Single value · Hohenrain
Sulphate 11 mg/l Single value · Hohenrain

Further parameters (3)

Further parameters – Hohenrain
Parameter Value Parametric value Share of the parametric value Reference
Calcium 107 mg/l Single value · Hohenrain
Magnesium 18 mg/l Single value · Hohenrain
Total hardness 34.2 fH° Single value · Hohenrain

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.hohenrain.ch/verwaltung/wasserversorgungen.html/59 · 2023-2026 · retrieved on 12/08/2026

Postcodes in this zone: 6276

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
23.7 °dH
Hardness range hard
Key values Kleinwangen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 24-26 mg/l 40 mg/l Single value · Kleinwangen
Sulphate 17 mg/l Single value · Kleinwangen
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Kleinwangen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 24-26 mg/l 40 mg/l Single value · Kleinwangen

Indicator parameters (2)

Indicator parameters – Kleinwangen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 22 mg/l Single value · Kleinwangen
Sulphate 17 mg/l Single value · Kleinwangen

Further parameters (3)

Further parameters – Kleinwangen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 146 mg/l Single value · Kleinwangen
Magnesium 13.8 mg/l Single value · Kleinwangen
Total hardness 42.3 fH° Single value · Kleinwangen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.hohenrain.ch/verwaltung/wasserversorgungen.html/59 · 2023-2026 · retrieved on 12/08/2026

Postcodes in this zone: 6276

Frequently asked questions about drinking water in Hohenrain

How hard is the water in Hohenrain?
Gemeinde Hohenrain (mehrere Wasserversorgungen: Ballwil, Günikon, Hohenrain, Kleinwangen, Lieli-Dorf, Oberebersol) publishes a total hardness of 34.2 fH° for the supply zone Hohenrain — that corresponds to 19.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 12/08/2026.
How much nitrate is in the drinking water in Hohenrain?
Gemeinde Hohenrain (mehrere Wasserversorgungen: Ballwil, Günikon, Hohenrain, Kleinwangen, Lieli-Dorf, Oberebersol) publishes a nitrate value of 13 mg/l for the supply zone Hohenrain. The statutory parametric value is 40 mg/l; the measured value represents 33 % of the parametric value. Basis: Publication by the water supplier, retrieved on 12/08/2026.
Who supplies the drinking water in Hohenrain?
Gemeinde Hohenrain (mehrere Wasserversorgungen: Ballwil, Günikon, Hohenrain, Kleinwangen, Lieli-Dorf, Oberebersol). The values shown here come from the supply zone Hohenrain and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.