Who supplies the drinking water in Hochstadt a. Main?

Gemeinde Hochstadt a. Main / Wasserversorgung Hochstadt. The values shown here come from the supply zone Wasserversorgung Hochstadt, Burgstaller Str. 2 (Probenahmeort: Katzogelhalle, EH nach Wasseruhr, Hochstadt) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Hochstadt a. Main

One supply zone, water supplier: Gemeinde Hochstadt a. Main / Wasserversorgung Hochstadt.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Wasserversorgung Hochstadt, Burgstaller Str. 2 (Probenahmeort: Katzogelhalle, EH nach Wasseruhr, Hochstadt)

Gemeinde Hochstadt a. Main / Wasserversorgung Hochstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (12 — most recent value per parameter)

Microbiology (1)

Microbiology – Wasserversorgung Hochstadt, Burgstaller Str. 2 (Probenahmeort: Katzogelhalle, EH nach Wasseruhr, Hochstadt)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Intestinal enterococci	0 KBE/100ml	0/100 ml	—	Single value

Indicator parameters (10)

Indicator parameters – Wasserversorgung Hochstadt, Burgstaller Str. 2 (Probenahmeort: Katzogelhalle, EH nach Wasseruhr, Hochstadt)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Coliform bacteria	0 1/100ml	0/100 ml	—	Single value
Colony count 22 °C	0 1/ml	ohne anormale Veränderung	—	Single value
Colony count 36 °C	2 1/ml	ohne anormale Veränderung	—	Single value
Colour	farblos Unit not stated in the document	0.5 m⁻¹	—	Single value
Conductivity (25 °C)	662 µS/cm	2,790 µS/cm	—	Single value
Odour	ohne	für den Verbraucher annehmbar	—	Single value
pH	7,9	6,5–9,5	—	Single value
Taste	ohne	für den Verbraucher annehmbar	—	Single value
Temperature	8,0 °C	—	—	Single value
Turbidity	0,31 FNU	1 NTU	—	Single value

Further parameters (1)

Further parameters – Wasserversorgung Hochstadt, Burgstaller Str. 2 (Probenahmeort: Katzogelhalle, EH nach Wasseruhr, Hochstadt)
Parameter	Value	Parametric value	Share of the parametric value	Reference
Oxygen	- mg/l not determined	—	—	Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.hochstadt-main.de/fileadmin/Hochstadt/Buergerservice_und_Politik/Ver_und_Entsorgung/Wasser_Abwasser/2026_Pr%C3%BCfbericht_Trinkwasser.pdf · 27.02.2026 · Prüfzeitraum 24.02.2026 - 27.02.2026 · retrieved on 13/07/2026

Postcodes in this zone: 96272

Frequently asked questions about drinking water in Hochstadt a. Main

Who supplies the drinking water in Hochstadt a. Main?: Gemeinde Hochstadt a. Main / Wasserversorgung Hochstadt. The values shown here come from the supply zone Wasserversorgung Hochstadt, Burgstaller Str. 2 (Probenahmeort: Katzogelhalle, EH nach Wasseruhr, Hochstadt) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.