Skip to content
maunawai.info

Drinking water in Hinterforst

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.9 °dH
Hardness range hard
Key values Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.5 mg/l 40 mg/l
14 %
Mean · Altstätten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Altstätten
Sulphate 12.7 mg/l Mean · Altstätten
Sodium 6.8 mg/l 200 mg/l
3 %
Mean · Altstätten
Show all recorded parameters (17 — most recent value per parameter)

Microbiology (3)

Microbiology – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 9.3 KBE/ml 300 1/ml Mean · Altstätten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Altstätten
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Altstätten

Chemical parameters (2)

Chemical parameters – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.2 mg/l 1.5 mg/l
13 %
Mean · Altstätten
Nitrate 5.5 mg/l 40 mg/l
14 %
Mean · Altstätten

Indicator parameters (7)

Indicator parameters – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Chloride 8.1 mg/l Mean · Altstätten
Conductivity (25 °C) 545.8 µS/cm Mean · Altstätten
pH 7.7 Mean · Altstätten
Sodium 6.8 mg/l 200 mg/l
3 %
Mean · Altstätten
Sulphate 12.7 mg/l Mean · Altstätten
Temperature 12.1 °C Mean · Altstätten
Turbidity 0.1 TE/F Mean · Altstätten

Further parameters (5)

Further parameters – Altstätten
Parameter Value Parametric value Share of the parametric value Reference
Calcium 76.2 mg/l Mean · Altstätten
Hydrogen carbonate 348.3 mg/l Mean · Altstätten
Magnesium 18.4 mg/l Mean · Altstätten
Potassium 1.5 mg/l Mean · Altstätten
Total hardness 26.6 °fH Mean · Altstätten

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/901/wasserwerk-altstatten/3680/altstatten · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 9452

Show 2 more supply zones

Eichberg

Eichberg

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12.8 °dH
Hardness range medium
Key values Eichberg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.6 mg/l 40 mg/l
12 %
Mean · Eichberg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Eichberg
Sulphate 6.9 mg/l Mean · Eichberg
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Eichberg
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 101.1 KBE/ml 300 1/ml Mean · Eichberg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Eichberg
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Eichberg

Chemical parameters (1)

Chemical parameters – Eichberg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.6 mg/l 40 mg/l
12 %
Mean · Eichberg

Indicator parameters (6)

Indicator parameters – Eichberg
Parameter Value Parametric value Share of the parametric value Reference
Chloride 1.6 mg/l Mean · Eichberg
Conductivity (25 °C) 458.7 µS/cm Mean · Eichberg
pH 7.5 Mean · Eichberg
Sulphate 6.9 mg/l Mean · Eichberg
Temperature 14 °C Mean · Eichberg
Turbidity 0.3 TE/F Mean · Eichberg

Further parameters (3)

Further parameters – Eichberg
Parameter Value Parametric value Share of the parametric value Reference
Calcium 75.1 mg/l Mean · Eichberg
Magnesium 10 mg/l Mean · Eichberg
Total hardness 22.9 °fH Mean · Eichberg

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/814/eichberg/2810/eichberg · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 9452

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.9 °dH
Hardness range medium
Key values Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.1 mg/l 40 mg/l
13 %
Mean · Lienz / Plona
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lienz / Plona
Sulphate 3.6 mg/l Mean · Lienz / Plona
Sodium 0.6 mg/l 200 mg/l
0.3 %
Mean · Lienz / Plona
Show all recorded parameters (15 — most recent value per parameter)

Microbiology (3)

Microbiology – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 6.2 KBE/ml 300 1/ml Mean · Lienz / Plona
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lienz / Plona
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Lienz / Plona

Chemical parameters (1)

Chemical parameters – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.1 mg/l 40 mg/l
13 %
Mean · Lienz / Plona

Indicator parameters (7)

Indicator parameters – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Chloride 0.8 mg/l Mean · Lienz / Plona
Conductivity (25 °C) 338.2 µS/cm Mean · Lienz / Plona
pH 7.9 Mean · Lienz / Plona
Sodium 0.6 mg/l 200 mg/l
0.3 %
Mean · Lienz / Plona
Sulphate 3.6 mg/l Mean · Lienz / Plona
Temperature 12.9 °C Mean · Lienz / Plona
Turbidity 0.1 TE/F Mean · Lienz / Plona

Further parameters (4)

Further parameters – Lienz / Plona
Parameter Value Parametric value Share of the parametric value Reference
Calcium 67.4 mg/l Mean · Lienz / Plona
Magnesium 1.9 mg/l Mean · Lienz / Plona
Potassium 0.5 mg/l Mean · Lienz / Plona
Total hardness 17.6 °fH Mean · Lienz / Plona

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/901/wasserwerk-altstatten/3679/lienz-plona · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 9452

Frequently asked questions about drinking water in Hinterforst

How hard is the water in Hinterforst?
Wasserwerk Altstätten publishes a total hardness of 26.6 °fH for the supply zone Altstätten — that corresponds to 14.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Hinterforst?
Wasserwerk Altstätten publishes a nitrate value of 5.5 mg/l for the supply zone Altstätten. The statutory parametric value is 40 mg/l; the measured value represents 14 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Hinterforst?
Wasserwerk Altstätten. The values shown here come from the supply zone Altstätten and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.