Drinking water in Hesel, Neukamperfehn u.a.
One supply zone, water supplier: Wasserversorgungsverband Moormerland-Uplengen-Hesel-Jümme.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
101 Reinwasser Ww.Ausgang
Wasserversorgungsverband Moormerland-Uplengen-Hesel-JümmeAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | < 1,00 mg/l below limit of quantification | 50 mg/l | < 2 % * | Single value |
| Sulphate | 16,50 mg/l | 250 mg/l | 7 % | Single value |
| Sodium | 11,88 mg/l | 200 mg/l | 6 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (85 — most recent value per parameter)
Chemical parameters (45)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < 0,000500 mg/l below limit of quantification | 3 µg/l | < 17 % * | Single value |
| 2,6-Dichlorobenzamide (BAM) | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| AMPA | < 0,000020 mg/l below limit of quantification | — | — | Single value |
| Atrazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Bentazone | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Benzene | < 0,000300 mg/l below limit of quantification | 1 µg/l | < 30 % * | Single value |
| Benzo(a)pyrene | < 0,000003 mg/l below limit of quantification | 10 ng/l | < 30 % * | Single value |
| Benzo(b)fluoranthene | < 0,000007 mg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | < 0,000007 mg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | < 0,000007 mg/l below limit of quantification | — | — | Single value |
| Boron | < 0,0500 mg/l below limit of quantification | 1 mg/l | < 5 % * | Single value |
| Bromacil | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Bromate | < 0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value |
| Chloridazon | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Chlorotoluron | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Desethylatrazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Desethylterbuthylazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Dichlorprop | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Dimethachlor | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Dimethenamid | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Diuron | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Ethidimuron | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Ethofumesate | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Fluoride | < 0,200 mg/l below limit of quantification | 1.5 mg/l | < 13 % * | Single value |
| Glyphosate | < 0,000020 mg/l below limit of quantification | — | — | Single value |
| Indeno(1,2,3-cd)pyrene | < 0,000007 mg/l below limit of quantification | — | — | Single value |
| Isoproturon | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| MCPA | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Mecoprop | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metalaxyl | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metamitron | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metazachlor | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metolachlor | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metribuzin | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Nitrate | < 1,00 mg/l below limit of quantification | 50 mg/l | < 2 % * | Single value |
| Nitrite | < 0,010 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Oxadixyl | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Polycyclic aromatic hydrocarbons | mg/l not detectable | 0.1 µg/l | — | Single value |
| Selenium | < 0,0030 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value |
| Simazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | < 0,000500 mg/l below limit of quantification | — | — | Single value |
| Trichloroethene | < 0,000500 mg/l below limit of quantification | — | — | Single value |
| Uranium | < 0,000100 mg/l below limit of quantification | 10 µg/l | < 1 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (21)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecane sulfonic acid (PFDoDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Trifluoroacetic acid (TFA) | < 0,000500 mg/l below limit of quantification | 60 µg/l UBA guide value | < 0.8 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
For trifluoroacetic acid (TFA), the German Drinking Water Ordinance does not specify a parametric value. The comparison is therefore made with the guide value of 60 µg/l issued by the Umweltbundesamt, which has replaced the earlier health-related guidance value of 3 µg/l. A guide value is not a legal maximum but a health-related classification.
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Desphenyl-chloridazon | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Methyl-desphenyl-chloridazon | < 0,000025 mg/l below limit of quantification | — | — | Single value |
Indicator parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | < 0,050 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value |
| Calcite dissolution capacity | 3,31 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 17,95 mg/l | 250 mg/l | 7 % | Single value |
| Colour | farblos ohne | 0.5 m⁻¹ | — | Single value |
| Odour | geruchlos ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 7,93 ohne | 6,5–9,5 | — | Single value |
| Sodium | 11,88 mg/l | 200 mg/l | 6 % | Single value |
| Sulphate | 16,50 mg/l | 250 mg/l | 7 % | Single value |
| Taste | geschmacklos ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 16,40 °C | — | — | Single value |
| Total organic carbon (TOC) | 0,790 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | keine ohne | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 1,310 mmol/l | — | — | Single value |
| Calcium | 24,54 mg/l | — | — | Single value |
| Magnesium | 3,2 mg/l | — | — | Single value |
| Potassium | 2,2 mg/l | — | — | Single value |
| Total hardness | 0,745 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 26835
Frequently asked questions about drinking water in Hesel, Neukamperfehn u.a.
- How hard is the water in Hesel, Neukamperfehn u.a.?
- Wasserversorgungsverband Moormerland-Uplengen-Hesel-Jümme publishes a total hardness of 0,745 mmol/l for the supply zone 101 Reinwasser Ww.Ausgang — that corresponds to 4.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 09. Juni 2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Hesel, Neukamperfehn u.a.?
- Wasserversorgungsverband Moormerland-Uplengen-Hesel-Jümme publishes a nitrate value of < 1,00 mg/l for the supply zone 101 Reinwasser Ww.Ausgang. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: 09. Juni 2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Hesel, Neukamperfehn u.a.?
- Wasserversorgungsverband Moormerland-Uplengen-Hesel-Jümme. The values shown here come from the supply zone 101 Reinwasser Ww.Ausgang and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.