Skip to content
maunawai.info

Drinking water in Herrstein

12 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
5.6 °dH
Hardness range soft
Key values HB Silberich
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS < 0.02 µg/L
below limit of quantification
0.1 µg/l
< 20 % *
Mean · HB Silberich
Nitrate 3.4 mg/L 50 mg/l
7 %
Mean · HB Silberich
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Silberich
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Silberich
Sulphate 16 mg/L 250 mg/l
6 %
Mean · HB Silberich
Sodium 7.3 mg/L 200 mg/l
4 %
Mean · HB Silberich

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – HB Silberich
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Silberich

Chemical parameters (14)

Chemical parameters – HB Silberich
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · HB Silberich
Arsenic < 2 µg/L
below limit of quantification
10 µg/l
< 20 % *
Mean · HB Silberich
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · HB Silberich
Cadmium < 1 µg/L
below limit of quantification
3 µg/l
< 33 % *
Mean · HB Silberich
Copper < 0.002 mg/L
below limit of quantification
2 mg/l
< 0.1 % *
Mean · HB Silberich
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Silberich
Fluoride < 0.1 mg/L
below limit of quantification
1.5 mg/l
< 7 % *
Mean · HB Silberich
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Silberich
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · HB Silberich
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · HB Silberich
Nitrate 3.4 mg/L 50 mg/l
7 %
Mean · HB Silberich
Nitrite < 0.03 mg/L
below limit of quantification
0.5 mg/l
< 6 % *
Mean · HB Silberich
Selenium 4 µg/L 10 µg/l
40 %
Mean · HB Silberich
Uranium < 0.5 µg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · HB Silberich

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – HB Silberich
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS < 0.02 µg/L
below limit of quantification
0.1 µg/l
< 20 % *
Mean · HB Silberich

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (10)

Indicator parameters – HB Silberich
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · HB Silberich
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · HB Silberich
Chloride 11 mg/L 250 mg/l
4 %
Mean · HB Silberich
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · HB Silberich
Iron < 0.001 mg/L
below limit of quantification
0.2 mg/l
< 0.5 % *
Mean · HB Silberich
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Silberich
pH 8.1 - 6,5–9,5 Mean · HB Silberich
Sodium 7.3 mg/L 200 mg/l
4 %
Mean · HB Silberich
Sulphate 16 mg/L 250 mg/l
6 %
Mean · HB Silberich
Temperature 13.9 °C Mean · HB Silberich

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – HB Silberich
Parameter Value Parametric value Share of the parametric value Reference
Calcium 35 mg/L Mean · HB Silberich
Magnesium 2.5 mg/L Mean · HB Silberich
Potassium < 0.3 mg/L
below limit of quantification
Mean · HB Silberich
Total hardness 0.99 mmol/l Mean · HB Silberich

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2541695087/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 55756

Show 11 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
3.9 °dH
Hardness range soft
Key values WiLa
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · WiLa
Nitrate 6.7 mg/L 50 mg/l
13 %
Mean · WiLa
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · WiLa
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · WiLa
Sulphate 6.7 mg/L 250 mg/l
3 %
Mean · WiLa
Sodium 3.7 mg/L 200 mg/l
2 %
Mean · WiLa

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – WiLa
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · WiLa

Chemical parameters (14)

Chemical parameters – WiLa
Parameter Value Parametric value Share of the parametric value Reference
Antimony 1 µg/L 5 µg/l
20 %
Mean · WiLa
Arsenic 4 µg/L 10 µg/l
40 %
Mean · WiLa
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · WiLa
Cadmium < 1 µg/L
below limit of quantification
3 µg/l
< 33 % *
Mean · WiLa
Copper < 0.002 mg/L
below limit of quantification
2 mg/l
< 0.1 % *
Mean · WiLa
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · WiLa
Fluoride < 0.1 mg/L
below limit of quantification
1.5 mg/l
< 7 % *
Mean · WiLa
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · WiLa
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · WiLa
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · WiLa
Nitrate 6.7 mg/L 50 mg/l
13 %
Mean · WiLa
Nitrite < 0.03 mg/L
below limit of quantification
0.5 mg/l
< 6 % *
Mean · WiLa
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · WiLa
Uranium < 0.2 µg/L
below limit of quantification
10 µg/l
< 2 % *
Mean · WiLa

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – WiLa
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · WiLa

Indicator parameters (10)

Indicator parameters – WiLa
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · WiLa
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · WiLa
Chloride 7.2 mg/L 250 mg/l
3 %
Mean · WiLa
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · WiLa
Iron < 0.001 mg/L
below limit of quantification
0.2 mg/l
< 0.5 % *
Mean · WiLa
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · WiLa
pH 8.3 - 6,5–9,5 Mean · WiLa
Sodium 3.7 mg/L 200 mg/l
2 %
Mean · WiLa
Sulphate 6.7 mg/L 250 mg/l
3 %
Mean · WiLa
Temperature 11.8 °C Mean · WiLa

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – WiLa
Parameter Value Parametric value Share of the parametric value Reference
Calcium 23 mg/L Mean · WiLa
Magnesium 1.4 mg/L Mean · WiLa
Potassium < 0.3 mg/L
below limit of quantification
Mean · WiLa
Total hardness 0.7 mmol/l Mean · WiLa

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2541695302/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 55756

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
3.5 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Allenbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,50 mmol/l Single value · Allenbach
Hardness range (WRMG) weich Single value · Allenbach
Total hardness 3,5 ° dH Single value · Allenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.1 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,55 mmol/l Single value · Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler
Hardness range (WRMG) weich Single value · Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler
Total hardness 4,1 ° dH Single value · Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.5 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,71 mmol/l Single value · Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden
Hardness range (WRMG) weich Single value · Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden
Total hardness 5,5 ° dH Single value · Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.6 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,73 mmol/l Single value · Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt
Hardness range (WRMG) weich Single value · Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt
Total hardness 5,6 ° dH Single value · Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
3.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,44 mmol/l Single value · Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach
Hardness range (WRMG) weich Single value · Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach
Total hardness 3,3 ° dH Single value · Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.6 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Gerach, Hintertiefenbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,71 mmol/l Single value · Gerach, Hintertiefenbach
Hardness range (WRMG) weich Single value · Gerach, Hintertiefenbach
Total hardness 5,6 ° dH Single value · Gerach, Hintertiefenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Gösenroth, Schwerbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,68 mmol/l Single value · Gösenroth, Schwerbach
Hardness range (WRMG) weich Single value · Gösenroth, Schwerbach
Total hardness 4,3 ° dH Single value · Gösenroth, Schwerbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Hettenrodt, Kirschweiler, Mackenrodt

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.4 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Hettenrodt, Kirschweiler, Mackenrodt
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,69 mmol/l Single value · Hettenrodt, Kirschweiler, Mackenrodt
Hardness range (WRMG) weich Single value · Hettenrodt, Kirschweiler, Mackenrodt
Total hardness 5,4 ° dH Single value · Hettenrodt, Kirschweiler, Mackenrodt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
2.6 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Horbruch, Krummenau
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,35 mmol/l Single value · Horbruch, Krummenau
Hardness range (WRMG) weich Single value · Horbruch, Krummenau
Total hardness 2,6 ° dH Single value · Horbruch, Krummenau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.5 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Katzenloch
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,71 mmol/l Single value · Katzenloch
Hardness range (WRMG) weich Single value · Katzenloch
Total hardness 5,5 ° dH Single value · Katzenloch

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55756

Frequently asked questions about drinking water in Herrstein

How hard is the water in Herrstein?
TWIST RLP - HB Silberich publishes a total hardness of 0.99 mmol/l for the supply zone HB Silberich — that corresponds to 5.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Herrstein?
TWIST RLP - HB Silberich publishes a nitrate value of 3.4 mg/L for the supply zone HB Silberich. The statutory parametric value is 50 mg/l; the measured value represents 7 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Are PFAS detectable in the drinking water in Herrstein?
TWIST RLP - HB Silberich publishes for the supply zone HB Silberich a sum value PFAS-20 below the limit of quantification (entry in the report: "< 0.02 µg/L"). This is not to be read as "PFAS-free": below the limit of quantification, the measurement cannot make any statement. The statutory parametric value is 0.1 µg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Herrstein?
TWIST RLP - HB Silberich. The values shown here come from the supply zone HB Silberich and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.