Skip to content
maunawai.info

Drinking water in Hermaringen

6 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Betriebsführung Sontheim

Stadtwerke Giengen GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
18.5 °dH
Hardness range hart
Key values Betriebsführung Sontheim
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15,6 mg/L 50 mg/l
31 %
Single value · Betriebsführung Sontheim
Sulphate 19,1 mg/L 250 mg/l
8 %
Single value · Betriebsführung Sontheim
Sodium 3,3 mg/L 200 mg/l
2 %
Single value · Betriebsführung Sontheim
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (12)

Chemical parameters – Betriebsführung Sontheim
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/L
below limit of quantification
3 µg/l
< 10 % *
Single value · Betriebsführung Sontheim
Benzene <0,00025 mg/L
below limit of quantification
1 µg/l
< 25 % *
Single value · Betriebsführung Sontheim
Boron <0,01 mg/L
below limit of quantification
1 mg/l
< 1 % *
Single value · Betriebsführung Sontheim
Bromate <0,0005 mg/L
below limit of quantification
10 µg/l
< 5 % *
Single value · Betriebsführung Sontheim
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value · Betriebsführung Sontheim
Cyanide <0,002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Single value · Betriebsführung Sontheim
Fluoride 0,09 mg/L 1.5 mg/l
6 %
Single value · Betriebsführung Sontheim
Mercury <0,00005 mg/L
below limit of quantification
1 µg/l
< 5 % *
Single value · Betriebsführung Sontheim
Nitrate 15,6 mg/L 50 mg/l
31 %
Single value · Betriebsführung Sontheim
Selenium 0,005 mg/L 10 µg/l
50 %
Single value · Betriebsführung Sontheim
Tetrachloroethene <0,0001 mg/L
below limit of quantification
Single value · Betriebsführung Sontheim
Trichloroethene <0,0001 mg/L
below limit of quantification
Single value · Betriebsführung Sontheim

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Betriebsführung Sontheim
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Betriebsführung Sontheim
Chloride 10,1 mg/L 250 mg/l
4 %
Single value · Betriebsführung Sontheim
Manganese <0,0025 mg/L
below limit of quantification
50 µg/l
< 5 % *
Single value · Betriebsführung Sontheim
Sodium 3,3 mg/L 200 mg/l
2 %
Single value · Betriebsführung Sontheim
Sulphate 19,1 mg/L 250 mg/l
8 %
Single value · Betriebsführung Sontheim
Taste neutral - für den Verbraucher annehmbar Single value · Betriebsführung Sontheim
Total organic carbon (TOC) 0,4 mg/L ohne anormale Veränderung Single value · Betriebsführung Sontheim
Turbidity 0,02 NTU 1 NTU Single value · Betriebsführung Sontheim

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Betriebsführung Sontheim
Parameter Value Parametric value Share of the parametric value Reference
Calcium 109 mg/L Single value · Betriebsführung Sontheim
Carbonate hardness 17,0 ° dH Single value · Betriebsführung Sontheim
Hardness range (WRMG) hart - Single value · Betriebsführung Sontheim
Magnesium 14 mg/L Single value · Betriebsführung Sontheim
Potassium 0,9 mg/L Single value · Betriebsführung Sontheim
Total hardness 18,5 ° dH Single value · Betriebsführung Sontheim

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 89568

Show 5 more supply zones

Burgberg Hürben

Stadtwerke Giengen GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.4 °dH
Hardness range mittel
Key values Burgberg Hürben
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22,1 mg/L 50 mg/l
44 %
Mean · Burgberg Hürben
Sulphate 22,9 mg/L 250 mg/l
9 %
Mean · Burgberg Hürben
Sodium 11,9 mg/L 200 mg/l
6 %
Mean · Burgberg Hürben
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (12)

Chemical parameters – Burgberg Hürben
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/L
below limit of quantification
3 µg/l
< 10 % *
Mean · Burgberg Hürben
Benzene <0,00025 mg/L
below limit of quantification
1 µg/l
< 25 % *
Mean · Burgberg Hürben
Boron 0,01 mg/L 1 mg/l
1 %
Mean · Burgberg Hürben
Bromate <0,0005 mg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · Burgberg Hürben
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Mean · Burgberg Hürben
Cyanide <0,002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Mean · Burgberg Hürben
Fluoride 0,06 mg/L 1.5 mg/l
4 %
Mean · Burgberg Hürben
Mercury <0,00005 mg/L
below limit of quantification
1 µg/l
< 5 % *
Mean · Burgberg Hürben
Nitrate 22,1 mg/L 50 mg/l
44 %
Mean · Burgberg Hürben
Selenium <0,001 mg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Burgberg Hürben
Tetrachloroethene <0,0001 mg/L
below limit of quantification
Mean · Burgberg Hürben
Trichloroethene <0,0001 mg/L
below limit of quantification
Mean · Burgberg Hürben

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Burgberg Hürben
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Burgberg Hürben
Chloride 30,5 mg/L 250 mg/l
12 %
Mean · Burgberg Hürben
Manganese <0,0025 mg/L
below limit of quantification
50 µg/l
< 5 % *
Mean · Burgberg Hürben
Sodium 11,9 mg/L 200 mg/l
6 %
Mean · Burgberg Hürben
Sulphate 22,9 mg/L 250 mg/l
9 %
Mean · Burgberg Hürben
Taste neutral - für den Verbraucher annehmbar Mean · Burgberg Hürben
Total organic carbon (TOC) 0,9 mg/L ohne anormale Veränderung Mean · Burgberg Hürben
Turbidity 0,03 NTU 1 NTU Mean · Burgberg Hürben

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Burgberg Hürben
Parameter Value Parametric value Share of the parametric value Reference
Calcium 77 mg/L Mean · Burgberg Hürben
Carbonate hardness 10,2 ° dH Mean · Burgberg Hürben
Hardness range (WRMG) mittel - Mean · Burgberg Hürben
Magnesium 10,9 mg/L Mean · Burgberg Hürben
Potassium 2,2 mg/L Mean · Burgberg Hürben
Total hardness 13,4 ° dH Mean · Burgberg Hürben

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 89568

Gemeinde Syrgenstein

Stadtwerke Giengen GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
19.3 °dH
Hardness range hart
Key values Gemeinde Syrgenstein
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 18,0 mg/L 50 mg/l
36 %
Single value · Gemeinde Syrgenstein
Sulphate 17,7 mg/L 250 mg/l
7 %
Single value · Gemeinde Syrgenstein
Sodium 6,5 mg/L 200 mg/l
3 %
Single value · Gemeinde Syrgenstein
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (12)

Chemical parameters – Gemeinde Syrgenstein
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/L
below limit of quantification
3 µg/l
< 10 % *
Single value · Gemeinde Syrgenstein
Benzene <0,00025 mg/L
below limit of quantification
1 µg/l
< 25 % *
Single value · Gemeinde Syrgenstein
Boron <0,01 mg/L
below limit of quantification
1 mg/l
< 1 % *
Single value · Gemeinde Syrgenstein
Bromate <0,0005 mg/L
below limit of quantification
10 µg/l
< 5 % *
Single value · Gemeinde Syrgenstein
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value · Gemeinde Syrgenstein
Cyanide <0,002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Single value · Gemeinde Syrgenstein
Fluoride 0,06 mg/L 1.5 mg/l
4 %
Single value · Gemeinde Syrgenstein
Mercury <0,00005 mg/L
below limit of quantification
1 µg/l
< 5 % *
Single value · Gemeinde Syrgenstein
Nitrate 18,0 mg/L 50 mg/l
36 %
Single value · Gemeinde Syrgenstein
Selenium <0,001 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Gemeinde Syrgenstein
Tetrachloroethene 0,0001 mg/L Single value · Gemeinde Syrgenstein
Trichloroethene <0,0001 mg/L
below limit of quantification
Single value · Gemeinde Syrgenstein

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Gemeinde Syrgenstein
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Gemeinde Syrgenstein
Chloride 32,5 mg/L 250 mg/l
13 %
Single value · Gemeinde Syrgenstein
Manganese <0,0025 mg/L
below limit of quantification
50 µg/l
< 5 % *
Single value · Gemeinde Syrgenstein
Sodium 6,5 mg/L 200 mg/l
3 %
Single value · Gemeinde Syrgenstein
Sulphate 17,7 mg/L 250 mg/l
7 %
Single value · Gemeinde Syrgenstein
Taste neutral - für den Verbraucher annehmbar Single value · Gemeinde Syrgenstein
Total organic carbon (TOC) 0,4 mg/L ohne anormale Veränderung Single value · Gemeinde Syrgenstein
Turbidity 0,04 NTU 1 NTU Single value · Gemeinde Syrgenstein

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Gemeinde Syrgenstein
Parameter Value Parametric value Share of the parametric value Reference
Calcium 128 mg/L Single value · Gemeinde Syrgenstein
Carbonate hardness 16,1 ° dH Single value · Gemeinde Syrgenstein
Hardness range (WRMG) hart - Single value · Gemeinde Syrgenstein
Magnesium 6,1 mg/L Single value · Gemeinde Syrgenstein
Potassium 1,1 mg/L Single value · Gemeinde Syrgenstein
Total hardness 19,3 ° dH Single value · Gemeinde Syrgenstein

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 89568

Giengen Hohenmemmingen

Stadtwerke Giengen GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
19.5 °dH
Hardness range hart
Key values Giengen Hohenmemmingen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 18,5 mg/L 50 mg/l
37 %
Single value · Giengen Hohenmemmingen
Sulphate 17,7 mg/L 250 mg/l
7 %
Single value · Giengen Hohenmemmingen
Sodium 6,9 mg/L 200 mg/l
3 %
Single value · Giengen Hohenmemmingen
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (12)

Chemical parameters – Giengen Hohenmemmingen
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/L
below limit of quantification
3 µg/l
< 10 % *
Single value · Giengen Hohenmemmingen
Benzene <0,00025 mg/L
below limit of quantification
1 µg/l
< 25 % *
Single value · Giengen Hohenmemmingen
Boron <0,01 mg/L
below limit of quantification
1 mg/l
< 1 % *
Single value · Giengen Hohenmemmingen
Bromate 0,001 mg/L 10 µg/l
10 %
Single value · Giengen Hohenmemmingen
Chromium 0,001 mg/L 25 µg/l
4 %
Single value · Giengen Hohenmemmingen
Cyanide <0,002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Single value · Giengen Hohenmemmingen
Fluoride 0,06 mg/L 1.5 mg/l
4 %
Single value · Giengen Hohenmemmingen
Mercury <0,00005 mg/L
below limit of quantification
1 µg/l
< 5 % *
Single value · Giengen Hohenmemmingen
Nitrate 18,5 mg/L 50 mg/l
37 %
Single value · Giengen Hohenmemmingen
Selenium <0,001 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Giengen Hohenmemmingen
Tetrachloroethene <0,0001 mg/L
below limit of quantification
Single value · Giengen Hohenmemmingen
Trichloroethene <0,0001 mg/L
below limit of quantification
Single value · Giengen Hohenmemmingen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Giengen Hohenmemmingen
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Giengen Hohenmemmingen
Chloride 33,7 mg/L 250 mg/l
13 %
Single value · Giengen Hohenmemmingen
Manganese <0,0025 mg/L
below limit of quantification
50 µg/l
< 5 % *
Single value · Giengen Hohenmemmingen
Sodium 6,9 mg/L 200 mg/l
3 %
Single value · Giengen Hohenmemmingen
Sulphate 17,7 mg/L 250 mg/l
7 %
Single value · Giengen Hohenmemmingen
Taste neutral - für den Verbraucher annehmbar Single value · Giengen Hohenmemmingen
Total organic carbon (TOC) 0,4 mg/L ohne anormale Veränderung Single value · Giengen Hohenmemmingen
Turbidity 0,25 NTU 1 NTU Single value · Giengen Hohenmemmingen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Giengen Hohenmemmingen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 129 mg/L Single value · Giengen Hohenmemmingen
Carbonate hardness 15,9 ° dH Single value · Giengen Hohenmemmingen
Hardness range (WRMG) hart - Single value · Giengen Hohenmemmingen
Magnesium 6,1 mg/L Single value · Giengen Hohenmemmingen
Potassium 1,1 mg/L Single value · Giengen Hohenmemmingen
Total hardness 19,5 ° dH Single value · Giengen Hohenmemmingen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 89568

Hermaringen Betriebsführung

Stadtwerke Giengen GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
22.1 °dH
Hardness range sehr hart
Key values Hermaringen Betriebsführung
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 24,3 mg/L 50 mg/l
49 %
Single value · Hermaringen Betriebsführung
Sulphate 18,8 mg/L 250 mg/l
8 %
Single value · Hermaringen Betriebsführung
Sodium 8,4 mg/L 200 mg/l
4 %
Single value · Hermaringen Betriebsführung
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (12)

Chemical parameters – Hermaringen Betriebsführung
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/L
below limit of quantification
3 µg/l
< 10 % *
Single value · Hermaringen Betriebsführung
Benzene <0,00025 mg/L
below limit of quantification
1 µg/l
< 25 % *
Single value · Hermaringen Betriebsführung
Boron <0,01 mg/L
below limit of quantification
1 mg/l
< 1 % *
Single value · Hermaringen Betriebsführung
Bromate <0,0005 mg/L
below limit of quantification
10 µg/l
< 5 % *
Single value · Hermaringen Betriebsführung
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value · Hermaringen Betriebsführung
Cyanide <0,002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Single value · Hermaringen Betriebsführung
Fluoride 0,07 mg/L 1.5 mg/l
5 %
Single value · Hermaringen Betriebsführung
Mercury <0,00005 mg/L
below limit of quantification
1 µg/l
< 5 % *
Single value · Hermaringen Betriebsführung
Nitrate 24,3 mg/L 50 mg/l
49 %
Single value · Hermaringen Betriebsführung
Selenium <0,001 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Hermaringen Betriebsführung
Tetrachloroethene 0,0010 mg/L Single value · Hermaringen Betriebsführung
Trichloroethene <0,0001 mg/L
below limit of quantification
Single value · Hermaringen Betriebsführung

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Hermaringen Betriebsführung
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Hermaringen Betriebsführung
Chloride 43,4 mg/L 250 mg/l
17 %
Single value · Hermaringen Betriebsführung
Manganese <0,0025 mg/L
below limit of quantification
50 µg/l
< 5 % *
Single value · Hermaringen Betriebsführung
Sodium 8,4 mg/L 200 mg/l
4 %
Single value · Hermaringen Betriebsführung
Sulphate 18,8 mg/L 250 mg/l
8 %
Single value · Hermaringen Betriebsführung
Taste neutral - für den Verbraucher annehmbar Single value · Hermaringen Betriebsführung
Total organic carbon (TOC) 0,4 mg/L ohne anormale Veränderung Single value · Hermaringen Betriebsführung
Turbidity 0,02 NTU 1 NTU Single value · Hermaringen Betriebsführung

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Hermaringen Betriebsführung
Parameter Value Parametric value Share of the parametric value Reference
Calcium 130 mg/L Single value · Hermaringen Betriebsführung
Carbonate hardness 18,0 ° dH Single value · Hermaringen Betriebsführung
Hardness range (WRMG) sehr hart - Single value · Hermaringen Betriebsführung
Magnesium 17 mg/L Single value · Hermaringen Betriebsführung
Potassium 1,4 mg/L Single value · Hermaringen Betriebsführung
Total hardness 22,1 ° dH Single value · Hermaringen Betriebsführung

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 89568

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
20.6 °dH
Hardness range hart
Key values Sachsenhausen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 24,6 mg/L 50 mg/l
49 %
Single value · Sachsenhausen
Sulphate 24,2 mg/L 250 mg/l
10 %
Single value · Sachsenhausen
Sodium 4,6 mg/L 200 mg/l
2 %
Single value · Sachsenhausen
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (12)

Chemical parameters – Sachsenhausen
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/L
below limit of quantification
3 µg/l
< 10 % *
Single value · Sachsenhausen
Benzene <0,00025 mg/L
below limit of quantification
1 µg/l
< 25 % *
Single value · Sachsenhausen
Boron <0,01 mg/L
below limit of quantification
1 mg/l
< 1 % *
Single value · Sachsenhausen
Bromate <0,0005 mg/L
below limit of quantification
10 µg/l
< 5 % *
Single value · Sachsenhausen
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value · Sachsenhausen
Cyanide <0,002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Single value · Sachsenhausen
Fluoride 0,12 mg/L 1.5 mg/l
8 %
Single value · Sachsenhausen
Mercury <0,00005 mg/L
below limit of quantification
1 µg/l
< 5 % *
Single value · Sachsenhausen
Nitrate 24,6 mg/L 50 mg/l
49 %
Single value · Sachsenhausen
Selenium 0,005 mg/L 10 µg/l
50 %
Single value · Sachsenhausen
Tetrachloroethene <0,0001 mg/L
below limit of quantification
Single value · Sachsenhausen
Trichloroethene <0,0001 mg/L
below limit of quantification
Single value · Sachsenhausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Sachsenhausen
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Sachsenhausen
Chloride 28,6 mg/L 250 mg/l
11 %
Single value · Sachsenhausen
Manganese <0,0025 mg/L
below limit of quantification
50 µg/l
< 5 % *
Single value · Sachsenhausen
Sodium 4,6 mg/L 200 mg/l
2 %
Single value · Sachsenhausen
Sulphate 24,2 mg/L 250 mg/l
10 %
Single value · Sachsenhausen
Taste neutral - für den Verbraucher annehmbar Single value · Sachsenhausen
Total organic carbon (TOC) 0,3 mg/L ohne anormale Veränderung Single value · Sachsenhausen
Turbidity 0,02 NTU 1 NTU Single value · Sachsenhausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Sachsenhausen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 111 mg/L Single value · Sachsenhausen
Carbonate hardness 16,4 ° dH Single value · Sachsenhausen
Hardness range (WRMG) hart - Single value · Sachsenhausen
Magnesium 22 mg/L Single value · Sachsenhausen
Potassium 1,0 mg/L Single value · Sachsenhausen
Total hardness 20,6 ° dH Single value · Sachsenhausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 89568

Frequently asked questions about drinking water in Hermaringen

How hard is the water in Hermaringen?
Stadtwerke Giengen GmbH publishes a total hardness of 18.5 °dH for the supply zone Betriebsführung Sontheim (hardness range hart). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Hermaringen?
Stadtwerke Giengen GmbH publishes a nitrate value of 15,6 mg/L for the supply zone Betriebsführung Sontheim. The statutory parametric value is 50 mg/l; the measured value represents 31 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Hermaringen?
Stadtwerke Giengen GmbH. The values shown here come from the supply zone Betriebsführung Sontheim and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.