Skip to content
maunawai.info

Drinking water in Heppenheim

One supply zone, water supplier: Stadtwerke Heppenheim.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
17.5 °dH
Hardness range hard
Key values Erbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6,9 mg/l 50 mg/l
14 %
Single value
Lead < kleiner Bestimmungsgrenze mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Sulphate 37,6 mg/l 250 mg/l
15 %
Single value
Sodium 11,3 mg/l 200 mg/l
6 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (21 — most recent value per parameter)

Chemical parameters (7)

Chemical parameters – Erbach
Parameter Value Parametric value Share of the parametric value Reference
Benzene < kleiner Bestimmungsgrenze mg/l
below limit of quantification
1 µg/l
< 30 % *
Single value
Benzo(a)pyrene < kleiner Bestimmungsgrenze mg/l
below limit of quantification
10 ng/l
< 30 % *
Single value
Cadmium < kleiner Bestimmungsgrenze mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Fluoride < kleiner Bestimmungsgrenze mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value
Lead < kleiner Bestimmungsgrenze mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Nitrate 6,9 mg/l 50 mg/l
14 %
Single value
Tetrachloroethene < kleiner Bestimmungsgrenze mg/l
below limit of quantification
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Erbach
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < kleiner Bestimmungsgrenze mg/l
below limit of quantification
0.2 mg/l
< 25 % *
Single value
Ammonium < kleiner Bestimmungsgrenze mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Chloride 25,9 mg/l 250 mg/l
10 %
Single value
Iron < kleiner Bestimmungsgrenze mg/l
below limit of quantification
0.2 mg/l
< 25 % *
Single value
Manganese < kleiner Bestimmungsgrenze mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
pH 7,90 einheitenlos 6,5–9,5 Single value
Sodium 11,3 mg/l 200 mg/l
6 %
Single value
Sulphate 37,6 mg/l 250 mg/l
15 %
Single value
Temperature 11,2 °C Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Erbach
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 4,930 mmol/l Single value
Calcium 104,7 mg/l Single value
Magnesium 15,3 mg/l Single value
Potassium 2,0 mg/l Single value
Total hardness 17,5 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 64646

Frequently asked questions about drinking water in Heppenheim

How hard is the water in Heppenheim?
Stadtwerke Heppenheim publishes a total hardness of 17.5 °dH for the supply zone Erbach (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 03.05.2020, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Heppenheim?
Stadtwerke Heppenheim publishes a nitrate value of 6,9 mg/l for the supply zone Erbach. The statutory parametric value is 50 mg/l; the measured value represents 14 % of the parametric value. Basis: 03.05.2020, retrieved on 11/07/2026.
Who supplies the drinking water in Heppenheim?
Stadtwerke Heppenheim. The values shown here come from the supply zone Erbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.