Skip to content
maunawai.info

Drinking water in Hennigsdorf

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
20.6 °dH
Hardness range hart
Key values Hennigsdorf
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,0000013 mg/l Single value
Nitrate 2,18 mg/l 50 mg/l
4 %
Single value
Lead <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Single value
Sulphate 145,6 mg/l 250 mg/l
58 %
Single value
Sodium 26,6 mg/l 200 mg/l
13 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (59 — most recent value per parameter)

Microbiology (2)

Microbiology – Hennigsdorf
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Single value
Intestinal enterococci 0 Anzahl/100ml 0/100 ml Single value

Chemical parameters (27)

Chemical parameters – Hennigsdorf
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0009 mg/l
below limit of quantification
3 µg/l
< 30 % *
Single value
Acrylamide <0,00001 mg/l
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Antimony <0,0003 mg/l
below limit of quantification
5 µg/l
< 6 % *
Single value
Arsenic 0,0003 mg/l 10 µg/l
3 %
Single value
Benzene <0,0003 mg/l
below limit of quantification
1 µg/l
< 30 % *
Single value
Benzo(a)pyrene 0.0000 mg/l 10 ng/l
0 %
Single value
Bisphenol A <0,00005 mg/l
below limit of quantification
2.5 µg/l
< 2 % *
Single value
Boron <0.02 mg/l
below limit of quantification
1 mg/l
< 2 % *
Single value
Bromate <0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Chromium <0,0001 mg/l
below limit of quantification
25 µg/l
< 0.4 % *
Single value
Copper 0,023 mg/l 2 mg/l
1 %
Single value
Cyanide <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Epichlorohydrin <0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Single value
Fluoride 0,28 mg/l 1.5 mg/l
19 %
Single value
Lead <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Mercury <0,00003 mg/l
below limit of quantification
1 µg/l
< 3 % *
Single value
Nickel <0,0005 mg/l
below limit of quantification
20 µg/l
< 3 % *
Single value
Nitrate 2,18 mg/l 50 mg/l
4 %
Single value
Nitrite <0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value
Pesticides — Total <0,00003 mg/l
below limit of quantification
0.5 µg/l
< 6 % *
Single value
Polycyclic aromatic hydrocarbons <0,000005 mg/l
below limit of quantification
0.1 µg/l
< 5 % *
Single value
Selenium <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Tetrachloroethene and Trichloroethene (sum) <0,0002 mg/l
below limit of quantification
10 µg/l
< 2 % *
Single value
Trihalomethanes — Total <0,0005 mg/l
below limit of quantification
50 µg/l
< 1 % *
Single value
Uranium 0,00010 mg/l 10 µg/l
1 %
Single value
Vinyl chloride <0,0001 mg/l
below limit of quantification
0.5 µg/l
< 20 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Hennigsdorf
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,000001 mg/l
below limit of quantification
Single value
Sum of PFAS 0,0000013 mg/l Single value

Indicator parameters (18)

Indicator parameters – Hennigsdorf
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,007 g/m³
below limit of quantification
0.2 mg/l Single value
Ammonium 0,020 mg/l 0.5 mg/l
4 %
Single value
Calcite dissolution capacity -22,80 mg/l CaCO3 5 mg/l CaCO3 Single value
Chloride 48,4 mg/l 250 mg/l
19 %
Single value
Coliform bacteria 0 Anzahl/100 ml 0/100 ml Single value
Colony count 22 °C 12,5 Anzahl/ml ohne anormale Veränderung Single value
Colony count 36 °C 2,4 Anzahl/ml ohne anormale Veränderung Single value
Colour 0,30 m-1 0.5 m⁻¹ Single value
Conductivity (25 °C) 787,3 µS/cm 2,790 µS/cm Single value
Iron 0,011 mg/l 0.2 mg/l
5 %
Single value
Manganese 0,002 mg/l 50 µg/l
4 %
Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,41 6,5–9,5 Single value
Sodium 26,6 mg/l 200 mg/l
13 %
Single value
Sulphate 145,6 mg/l 250 mg/l
58 %
Single value
Taste ohne für den Verbraucher annehmbar Single value
Total organic carbon (TOC) 4,94 g/m³ ohne anormale Veränderung Single value
Turbidity 0,19 NTU 1 NTU Single value

Further parameters (10)

Further parameters – Hennigsdorf
Parameter Value Parametric value Share of the parametric value Reference
Calcium 3,17 mmol/l Single value
Carbonate hardness 12,2 °dH Single value
Free carbon dioxide 11,0 Single value
Hardness range (WRMG) hart - Single value
Magnesium 0,50 mmol/l Single value
Oxygen 8.4 mg/l Single value
Potassium 0,10 mmol/l Single value
Silicate / silicic acid 8,4 g/m³ Single value
Sum of alkaline earth metals 3,67 mol/m³ Single value
Total hardness 20,6 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 16761

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.6 °dH
Hardness range hart
Key values Wasserwerk Staaken
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,0000027 mg/l Single value
Nitrate 1,86 mg/l 50 mg/l
4 %
Single value
Lead <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Single value
Sulphate 110,4 mg/l 250 mg/l
44 %
Single value
Sodium 18,8 mg/l 200 mg/l
9 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (59 — most recent value per parameter)

Microbiology (2)

Microbiology – Wasserwerk Staaken
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Single value
Intestinal enterococci 0 Anzahl/100ml 0/100 ml Single value

Chemical parameters (27)

Chemical parameters – Wasserwerk Staaken
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0009 mg/l
below limit of quantification
3 µg/l
< 30 % *
Single value
Acrylamide <0,00001 mg/l
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Antimony <0,0003 mg/l
below limit of quantification
5 µg/l
< 6 % *
Single value
Arsenic <0,0010 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Benzene <0,0003 mg/l
below limit of quantification
1 µg/l
< 30 % *
Single value
Benzo(a)pyrene <0,000001 mg/l
below limit of quantification
10 ng/l
< 10 % *
Single value
Bisphenol A <0,00005 mg/l
below limit of quantification
2.5 µg/l
< 2 % *
Single value
Boron <0,02 mg/l
below limit of quantification
1 mg/l
< 2 % *
Single value
Bromate <0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Chromium <0,0001 mg/l
below limit of quantification
25 µg/l
< 0.4 % *
Single value
Copper 0,100 mg/l 2 mg/l
5 %
Single value
Cyanide <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Epichlorohydrin <0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Single value
Fluoride 0,16 mg/l 1.5 mg/l
11 %
Single value
Lead <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Mercury <0,00003 mg/l
below limit of quantification
1 µg/l
< 3 % *
Single value
Nickel <0,0005 mg/l
below limit of quantification
20 µg/l
< 3 % *
Single value
Nitrate 1,86 mg/l 50 mg/l
4 %
Single value
Nitrite <0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value
Pesticides — Total <0,00003 mg/l
below limit of quantification
0.5 µg/l
< 6 % *
Single value
Polycyclic aromatic hydrocarbons <0,000005 mg/l
below limit of quantification
0.1 µg/l
< 5 % *
Single value
Selenium <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Tetrachloroethene and Trichloroethene (sum) <0,0002 mg/l
below limit of quantification
10 µg/l
< 2 % *
Single value
Trihalomethanes — Total <0,0005 mg/l
below limit of quantification
50 µg/l
< 1 % *
Single value
Uranium 0,00010 mg/l 10 µg/l
1 %
Single value
Vinyl chloride <0,0001 mg/l
below limit of quantification
0.5 µg/l
< 20 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Wasserwerk Staaken
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,0000007 mg/l Single value
Sum of PFAS 0,0000027 mg/l Single value

Indicator parameters (18)

Indicator parameters – Wasserwerk Staaken
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,007 g/m³ 0.2 mg/l Single value
Ammonium 0,020 mg/l 0.5 mg/l
4 %
Single value
Calcite dissolution capacity -31,20 mg/l CaCO3 5 mg/l CaCO3 Single value
Chloride 29,7 mg/l 250 mg/l
12 %
Single value
Coliform bacteria 0 Anzahl/100 ml 0/100 ml Single value
Colony count 22 °C 10,5 100/ml ohne anormale Veränderung Single value
Colony count 36 °C 3,3 100/ml ohne anormale Veränderung Single value
Colour 0,18 m-1 0.5 m⁻¹ Single value
Conductivity (25 °C) 707,9 µS/cm 2,790 µS/cm Single value
Iron 0,016 mg/l 0.2 mg/l
8 %
Single value
Manganese 0,004 mg/l 50 µg/l
8 %
Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,57 6,5–9,5 Single value
Sodium 18,8 mg/l 200 mg/l
9 %
Single value
Sulphate 110,4 mg/l 250 mg/l
44 %
Single value
Taste ohne für den Verbraucher annehmbar Single value
Total organic carbon (TOC) 3,26 g/m³ ohne anormale Veränderung Single value
Turbidity 0,20 NTU 1 NTU Single value

Further parameters (10)

Further parameters – Wasserwerk Staaken
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,93 mmol/l Single value
Carbonate hardness 12,4 °dH Single value
Free carbon dioxide 7,1 Single value
Hardness range (WRMG) hart - Single value
Magnesium 0,38 mmol/l Single value
Oxygen 8,8 mg/l Single value
Potassium 0,09 mmol/l Single value
Silicate / silicic acid 8,9 g/m³ Single value
Sum of alkaline earth metals 3,31 mol/m³ Single value
Total hardness 18,6 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 16761

Frequently asked questions about drinking water in Hennigsdorf

How hard is the water in Hennigsdorf?
OWA GmbH (Falkensee) – Wasserwerk Staaken publishes a total hardness of 20.6 °dH for the supply zone Hennigsdorf (hardness range hart). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 25/07/2026.
How much nitrate is in the drinking water in Hennigsdorf?
OWA GmbH (Falkensee) – Wasserwerk Staaken publishes a nitrate value of 2,18 mg/l for the supply zone Hennigsdorf. The statutory parametric value is 50 mg/l; the measured value represents 4 % of the parametric value. Basis: Publication by the water supplier, retrieved on 25/07/2026.
Who supplies the drinking water in Hennigsdorf?
OWA GmbH (Falkensee) – Wasserwerk Staaken. The values shown here come from the supply zone Hennigsdorf and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.