How hard is the water in Hasliberg Reuti?

Wasserversorgung Hasliberg publishes a total hardness of 13.1 °fH for the supply zone Hasliberg Reuti — that corresponds to 7.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Hasliberg Reuti?

Wasserversorgung Hasliberg publishes a nitrate value of 0.55 mg/l for the supply zone Hasliberg Reuti. The statutory parametric value is 40 mg/l; the measured value represents 1 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.

Who supplies the drinking water in Hasliberg Reuti?

Wasserversorgung Hasliberg. The values shown here come from the supply zone Hasliberg Reuti and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Hasliberg Reuti

One supply zone, water supplier: Wasserversorgung Hasliberg.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Hasliberg Reuti

Wasserversorgung Hasliberg

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

7.3 °dH

Hardness range soft

Key values Hasliberg Reuti
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	0.55 mg/l	40 mg/l	1 %	Mean · Hasliberg Reuti
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Hasliberg Reuti
Sulphate	8.85 mg/l	—	—	Mean · Hasliberg Reuti
Sodium	0.55 mg/l	200 mg/l	0.3 %	Mean · Hasliberg Reuti

Show all recorded parameters (15 — most recent value per parameter)

Microbiology (3)

Microbiology – Hasliberg Reuti
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	1 KBE/ml	300 1/ml	—	Mean · Hasliberg Reuti
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Hasliberg Reuti
Intestinal enterococci	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Hasliberg Reuti

Chemical parameters (2)

Chemical parameters – Hasliberg Reuti
Parameter	Value	Parametric value	Share of the parametric value	Reference
Fluoride	< 0.08 mg/l below limit of quantification	1.5 mg/l	< 5 % *	Mean · Hasliberg Reuti
Nitrate	0.55 mg/l	40 mg/l	1 %	Mean · Hasliberg Reuti

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Hasliberg Reuti
Parameter	Value	Parametric value	Share of the parametric value	Reference
Chloride	0.1 mg/l	—	—	Mean · Hasliberg Reuti
Conductivity (25 °C)	261 µS/cm	—	—	Mean · Hasliberg Reuti
Sodium	0.55 mg/l	200 mg/l	0.3 %	Mean · Hasliberg Reuti
Sulphate	8.85 mg/l	—	—	Mean · Hasliberg Reuti
Temperature	6.3 °C	—	—	Mean · Hasliberg Reuti
Turbidity	0.56 TE/F	—	—	Mean · Hasliberg Reuti

Further parameters (4)

Further parameters – Hasliberg Reuti
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	48.15 mg/l	—	—	Mean · Hasliberg Reuti
Magnesium	2.7 mg/l	—	—	Mean · Hasliberg Reuti
Potassium	0.15 mg/l	—	—	Mean · Hasliberg Reuti
Total hardness	13.1 °fH	—	—	Mean · Hasliberg Reuti

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/649/wasserversorgung-hasliberg/2834/hasliberg-reuti · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 6086

Frequently asked questions about drinking water in Hasliberg Reuti

How hard is the water in Hasliberg Reuti?: Wasserversorgung Hasliberg publishes a total hardness of 13.1 °fH for the supply zone Hasliberg Reuti — that corresponds to 7.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Hasliberg Reuti?: Wasserversorgung Hasliberg publishes a nitrate value of 0.55 mg/l for the supply zone Hasliberg Reuti. The statutory parametric value is 40 mg/l; the measured value represents 1 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Hasliberg Reuti?: Wasserversorgung Hasliberg. The values shown here come from the supply zone Hasliberg Reuti and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.