Skip to content
maunawai.info

Drinking water in Hasliberg Goldern

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
11.1 °dH
Hardness range medium
Key values Hasliberg Goldern
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1.15 mg/l 40 mg/l
3 %
Mean · Hasliberg Goldern
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Goldern
Sulphate 21.2 mg/l Mean · Hasliberg Goldern
Sodium 1.3 mg/l 200 mg/l
0.7 %
Mean · Hasliberg Goldern
Show all recorded parameters (14 — most recent value per parameter)

Microbiology (3)

Microbiology – Hasliberg Goldern
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria nn
not detectable
Unit not stated in the document
300 1/ml Mean · Hasliberg Goldern
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Goldern
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Goldern

Chemical parameters (2)

Chemical parameters – Hasliberg Goldern
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.08 mg/l
below limit of quantification
1.5 mg/l
< 5 % *
Mean · Hasliberg Goldern
Nitrate 1.15 mg/l 40 mg/l
3 %
Mean · Hasliberg Goldern

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – Hasliberg Goldern
Parameter Value Parametric value Share of the parametric value Reference
Chloride 0.3 mg/l Mean · Hasliberg Goldern
Conductivity (25 °C) 372 µS/cm Mean · Hasliberg Goldern
Sodium 1.3 mg/l 200 mg/l
0.7 %
Mean · Hasliberg Goldern
Sulphate 21.2 mg/l Mean · Hasliberg Goldern
Temperature 9 °C Mean · Hasliberg Goldern

Further parameters (4)

Further parameters – Hasliberg Goldern
Parameter Value Parametric value Share of the parametric value Reference
Calcium 70.25 mg/l Mean · Hasliberg Goldern
Magnesium 5.65 mg/l Mean · Hasliberg Goldern
Potassium 0.45 mg/l Mean · Hasliberg Goldern
Total hardness 19.85 °fH Mean · Hasliberg Goldern

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6085

Show 2 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
7.3 °dH
Hardness range soft
Key values Hasliberg Reuti
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 0.55 mg/l 40 mg/l
1 %
Mean · Hasliberg Reuti
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Reuti
Sulphate 8.85 mg/l Mean · Hasliberg Reuti
Sodium 0.55 mg/l 200 mg/l
0.3 %
Mean · Hasliberg Reuti
Show all recorded parameters (15 — most recent value per parameter)

Microbiology (3)

Microbiology – Hasliberg Reuti
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 1 KBE/ml 300 1/ml Mean · Hasliberg Reuti
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Reuti
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Reuti

Chemical parameters (2)

Chemical parameters – Hasliberg Reuti
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.08 mg/l
below limit of quantification
1.5 mg/l
< 5 % *
Mean · Hasliberg Reuti
Nitrate 0.55 mg/l 40 mg/l
1 %
Mean · Hasliberg Reuti

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Hasliberg Reuti
Parameter Value Parametric value Share of the parametric value Reference
Chloride 0.1 mg/l Mean · Hasliberg Reuti
Conductivity (25 °C) 261 µS/cm Mean · Hasliberg Reuti
Sodium 0.55 mg/l 200 mg/l
0.3 %
Mean · Hasliberg Reuti
Sulphate 8.85 mg/l Mean · Hasliberg Reuti
Temperature 6.3 °C Mean · Hasliberg Reuti
Turbidity 0.56 TE/F Mean · Hasliberg Reuti

Further parameters (4)

Further parameters – Hasliberg Reuti
Parameter Value Parametric value Share of the parametric value Reference
Calcium 48.15 mg/l Mean · Hasliberg Reuti
Magnesium 2.7 mg/l Mean · Hasliberg Reuti
Potassium 0.15 mg/l Mean · Hasliberg Reuti
Total hardness 13.1 °fH Mean · Hasliberg Reuti

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6085

Hasliberg Wasserwendi

Wasserversorgung Hasliberg

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
8.8 °dH
Hardness range medium
Key values Hasliberg Wasserwendi
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1.05 mg/l 40 mg/l
3 %
Mean · Hasliberg Wasserwendi
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Wasserwendi
Sulphate 11.6 mg/l Mean · Hasliberg Wasserwendi
Sodium 0.7 mg/l 200 mg/l
0.4 %
Mean · Hasliberg Wasserwendi
Show all recorded parameters (15 — most recent value per parameter)

Microbiology (3)

Microbiology – Hasliberg Wasserwendi
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria nn
not detectable
Unit not stated in the document
300 1/ml Mean · Hasliberg Wasserwendi
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Wasserwendi
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hasliberg Wasserwendi

Chemical parameters (2)

Chemical parameters – Hasliberg Wasserwendi
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.08 mg/l
below limit of quantification
1.5 mg/l
< 5 % *
Mean · Hasliberg Wasserwendi
Nitrate 1.05 mg/l 40 mg/l
3 %
Mean · Hasliberg Wasserwendi

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Hasliberg Wasserwendi
Parameter Value Parametric value Share of the parametric value Reference
Chloride 0.1 mg/l Mean · Hasliberg Wasserwendi
Conductivity (25 °C) 305.4 µS/cm Mean · Hasliberg Wasserwendi
Sodium 0.7 mg/l 200 mg/l
0.4 %
Mean · Hasliberg Wasserwendi
Sulphate 11.6 mg/l Mean · Hasliberg Wasserwendi
Temperature 6.4 °C Mean · Hasliberg Wasserwendi
Turbidity 0.036 TE/F Mean · Hasliberg Wasserwendi

Further parameters (4)

Further parameters – Hasliberg Wasserwendi
Parameter Value Parametric value Share of the parametric value Reference
Calcium 56.1 mg/l Mean · Hasliberg Wasserwendi
Magnesium 4.15 mg/l Mean · Hasliberg Wasserwendi
Potassium 0.3 mg/l Mean · Hasliberg Wasserwendi
Total hardness 15.7 °fH Mean · Hasliberg Wasserwendi

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6085

Frequently asked questions about drinking water in Hasliberg Goldern

How hard is the water in Hasliberg Goldern?
Wasserversorgung Hasliberg publishes a total hardness of 19.85 °fH for the supply zone Hasliberg Goldern — that corresponds to 11.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Hasliberg Goldern?
Wasserversorgung Hasliberg publishes a nitrate value of 1.15 mg/l for the supply zone Hasliberg Goldern. The statutory parametric value is 40 mg/l; the measured value represents 3 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Hasliberg Goldern?
Wasserversorgung Hasliberg. The values shown here come from the supply zone Hasliberg Goldern and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.