Skip to content
maunawai.info

Drinking water in Hallein, Grödig

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
16.5 °dH
Hardness range hard
Key values Ittenthal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 10 mg/l 40 mg/l
25 %
Mean · Ittenthal
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Ittenthal
Show all recorded parameters (10 — most recent value per parameter)

Microbiology (3)

Microbiology – Ittenthal
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 8.6 KBE/ml 300 1/ml Mean · Ittenthal
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Ittenthal
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Ittenthal

Chemical parameters (1)

Chemical parameters – Ittenthal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 10 mg/l 40 mg/l
25 %
Mean · Ittenthal

Metabolites (2)

Metabolites – Ittenthal
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0.02 µg/l 0.1 µg/l
20 %
Mean · Ittenthal
Chlorothalonil metabolite R471811 0.02 µg/l 0.1 µg/l
20 %
Mean · Ittenthal

Indicator parameters (1)

Indicator parameters – Ittenthal
Parameter Value Parametric value Share of the parametric value Reference
Temperature 12 °C Mean · Ittenthal

Further parameters (3)

Further parameters – Ittenthal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 109 mg/l Mean · Ittenthal
Magnesium 5.5 mg/l Mean · Ittenthal
Total hardness 29.4 °fH Mean · Ittenthal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 5083

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
31.4 °dH
Hardness range hard
Key values Kaisten
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 30 mg/l 40 mg/l
75 %
Mean · Kaisten
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Kaisten
Show all recorded parameters (10 — most recent value per parameter)

Microbiology (3)

Microbiology – Kaisten
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 21 KBE/ml 300 1/ml Mean · Kaisten
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Kaisten
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Kaisten

Chemical parameters (1)

Chemical parameters – Kaisten
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 30 mg/l 40 mg/l
75 %
Mean · Kaisten

Metabolites (2)

Metabolites – Kaisten
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0.097 µg/l 0.1 µg/l
97 %
Mean · Kaisten
Chlorothalonil metabolite R471811 0.27 µg/l 0.1 µg/l
270 % Mean above the parametric value
Mean · Kaisten

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

Indicator parameters (1)

Indicator parameters – Kaisten
Parameter Value Parametric value Share of the parametric value Reference
Temperature 13.5 °C Mean · Kaisten

Further parameters (3)

Further parameters – Kaisten
Parameter Value Parametric value Share of the parametric value Reference
Calcium 167 mg/l Mean · Kaisten
Magnesium 34.7 mg/l Mean · Kaisten
Total hardness 56 °fH Mean · Kaisten

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 5083

Frequently asked questions about drinking water in Hallein, Grödig

How hard is the water in Hallein, Grödig?
Wasserversorgung Gemeinde Kaisten publishes a total hardness of 29.4 °fH for the supply zone Ittenthal — that corresponds to 16.5 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Hallein, Grödig?
Wasserversorgung Gemeinde Kaisten publishes a nitrate value of 10 mg/l for the supply zone Ittenthal. The statutory parametric value is 40 mg/l; the measured value represents 25 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Hallein, Grödig?
Wasserversorgung Gemeinde Kaisten. The values shown here come from the supply zone Ittenthal and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.