Skip to content
maunawai.info

Drinking water in Goldach

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.2 °dH
Hardness range medium
Key values Bergzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Bergzone Goldach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Bergzone Goldach
Sulphate 33 mg/l Mean · Bergzone Goldach
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Bergzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 1.5 KBE/ml 300 1/ml Mean · Bergzone Goldach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Bergzone Goldach
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Bergzone Goldach

Chemical parameters (1)

Chemical parameters – Bergzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Bergzone Goldach

Indicator parameters (6)

Indicator parameters – Bergzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7 mg/l Mean · Bergzone Goldach
Conductivity (25 °C) 345 µS/cm Mean · Bergzone Goldach
pH 7.9 Mean · Bergzone Goldach
Sulphate 33 mg/l Mean · Bergzone Goldach
Temperature 13.2 °C Mean · Bergzone Goldach
Turbidity 0.1 TE/F Mean · Bergzone Goldach

Further parameters (3)

Further parameters – Bergzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 51 mg/l Mean · Bergzone Goldach
Magnesium 9 mg/l Mean · Bergzone Goldach
Total hardness 16.5 °fH Mean · Bergzone Goldach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 9403

Show 2 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.2 °dH
Hardness range medium
Key values Oberzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Oberzone Goldach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Oberzone Goldach
Sulphate 33 mg/l Mean · Oberzone Goldach
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Oberzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 7.5 KBE/ml 300 1/ml Mean · Oberzone Goldach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Oberzone Goldach
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Oberzone Goldach

Chemical parameters (1)

Chemical parameters – Oberzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Oberzone Goldach

Indicator parameters (6)

Indicator parameters – Oberzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7 mg/l Mean · Oberzone Goldach
Conductivity (25 °C) 345 µS/cm Mean · Oberzone Goldach
pH 7.9 Mean · Oberzone Goldach
Sulphate 33 mg/l Mean · Oberzone Goldach
Temperature 13 °C Mean · Oberzone Goldach
Turbidity 0.1 TE/F Mean · Oberzone Goldach

Further parameters (3)

Further parameters – Oberzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 51 mg/l Mean · Oberzone Goldach
Magnesium 9 mg/l Mean · Oberzone Goldach
Total hardness 16.5 °fH Mean · Oberzone Goldach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 9403

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.2 °dH
Hardness range medium
Key values Unterzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Unterzone Goldach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Unterzone Goldach
Sulphate 33 mg/l Mean · Unterzone Goldach
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Unterzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 1.5 KBE/ml 300 1/ml Mean · Unterzone Goldach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Unterzone Goldach
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Unterzone Goldach

Chemical parameters (1)

Chemical parameters – Unterzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Unterzone Goldach

Indicator parameters (6)

Indicator parameters – Unterzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7 mg/l Mean · Unterzone Goldach
Conductivity (25 °C) 345 µS/cm Mean · Unterzone Goldach
pH 7.9 Mean · Unterzone Goldach
Sulphate 33 mg/l Mean · Unterzone Goldach
Temperature 12 °C Mean · Unterzone Goldach
Turbidity 0.1 TE/F Mean · Unterzone Goldach

Further parameters (3)

Further parameters – Unterzone Goldach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 51 mg/l Mean · Unterzone Goldach
Magnesium 9 mg/l Mean · Unterzone Goldach
Total hardness 16.5 °fH Mean · Unterzone Goldach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 9403

Frequently asked questions about drinking water in Goldach

How hard is the water in Goldach?
Technische Betriebe Goldach publishes a total hardness of 16.5 °fH for the supply zone Bergzone Goldach — that corresponds to 9.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Goldach?
Technische Betriebe Goldach publishes a nitrate value of 4 mg/l for the supply zone Bergzone Goldach. The statutory parametric value is 40 mg/l; the measured value represents 10 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Goldach?
Technische Betriebe Goldach. The values shown here come from the supply zone Bergzone Goldach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.