Skip to content
maunawai.info

Drinking water in Givisiez

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Givisiez

SINEF SA

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
15.4 °dH
Hardness range hard
Key values Givisiez
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 11 mg/l 40 mg/l
27 %
Mean · Givisiez
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Givisiez
Sulphate 28.5 mg/l Mean · Givisiez
Sodium 6.5 mg/l 200 mg/l
3 %
Mean · Givisiez
Show all recorded parameters (12 — most recent value per parameter)

Microbiology (3)

Microbiology – Givisiez
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 103 KBE/ml 300 1/ml Mean · Givisiez
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Givisiez
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Givisiez

Chemical parameters (1)

Chemical parameters – Givisiez
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 11 mg/l 40 mg/l
27 %
Mean · Givisiez

Indicator parameters (4)

Indicator parameters – Givisiez
Parameter Value Parametric value Share of the parametric value Reference
Chloride 13 mg/l Mean · Givisiez
Sodium 6.5 mg/l 200 mg/l
3 %
Mean · Givisiez
Sulphate 28.5 mg/l Mean · Givisiez
Temperature 13.3 °C Mean · Givisiez

Further parameters (4)

Further parameters – Givisiez
Parameter Value Parametric value Share of the parametric value Reference
Calcium 86 mg/l Mean · Givisiez
Magnesium 14.7 mg/l Mean · Givisiez
Potassium 1 mg/l Mean · Givisiez
Total hardness 27.5 °fH Mean · Givisiez

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1042/sinef-sa/3554/givisiez · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 1762

Show 2 more supply zones

Fribourg

SINEF SA

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
15.7 °dH
Hardness range hard
Key values Fribourg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9 mg/l 40 mg/l
23 %
Mean · Fribourg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Fribourg
Sulphate 14 mg/l Mean · Fribourg
Sodium 7 mg/l 200 mg/l
3 %
Mean · Fribourg
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – Fribourg
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 6 KBE/ml 300 1/ml Mean · Fribourg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Fribourg
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Fribourg

Chemical parameters (1)

Chemical parameters – Fribourg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9 mg/l 40 mg/l
23 %
Mean · Fribourg

PFAS (3)

PFAS – Fribourg
Parameter Value Parametric value Share of the parametric value Reference
Perfluorohexane sulfonic acid (PFHxS) 0 µg/l 0.3 µg/l
0 %
Mean · Fribourg
Perfluorooctanesulfonic acid (PFOS) 0 µg/l 0.3 µg/l
0 %
Mean · Fribourg
Perfluorooctanoic acid (PFOA) 0 µg/l 0.5 µg/l
0 %
Mean · Fribourg

Metabolites (2)

Metabolites – Fribourg
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0 µg/l 0.1 µg/l
0 %
Mean · Fribourg
Chlorothalonil metabolite R471811 0.045 µg/l 0.1 µg/l
45 %
Mean · Fribourg

Indicator parameters (7)

Indicator parameters – Fribourg
Parameter Value Parametric value Share of the parametric value Reference
Chloride 11 mg/l Mean · Fribourg
Conductivity (25 °C) 497 µS/cm Mean · Fribourg
Iron 0 mg/l 0.2 mg/l
0 %
Mean · Fribourg
Manganese 0 mg/l 50 µg/l
0 %
Mean · Fribourg
Sodium 7 mg/l 200 mg/l
3 %
Mean · Fribourg
Sulphate 14 mg/l Mean · Fribourg
Turbidity 0.12 TE/F Mean · Fribourg

Further parameters (4)

Further parameters – Fribourg
Parameter Value Parametric value Share of the parametric value Reference
Calcium 85 mg/l Mean · Fribourg
Magnesium 18 mg/l Mean · Fribourg
Potassium 1 mg/l Mean · Fribourg
Total hardness 28 °fH Mean · Fribourg

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1042/sinef-sa/3598/fribourg · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 1762

Zone de distribution

CEFREN

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.6 °dH
Hardness range hard
Key values Zone de distribution
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9 mg/l 40 mg/l
23 %
Mean · Zone de distribution
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Zone de distribution
Sodium 6 mg/l 200 mg/l
3 %
Mean · Zone de distribution
Show all recorded parameters (15 — most recent value per parameter)

Microbiology (3)

Microbiology – Zone de distribution
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3 KBE/ml 300 1/ml Mean · Zone de distribution
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Zone de distribution
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Zone de distribution

Chemical parameters (1)

Chemical parameters – Zone de distribution
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9 mg/l 40 mg/l
23 %
Mean · Zone de distribution

PFAS (3)

PFAS – Zone de distribution
Parameter Value Parametric value Share of the parametric value Reference
Perfluorohexane sulfonic acid (PFHxS) < 0.001 µg/l
below limit of quantification
0.3 µg/l
< 0.3 % *
Mean · Zone de distribution
Perfluorooctanesulfonic acid (PFOS) < 0.001 µg/l
below limit of quantification
0.3 µg/l
< 0.3 % *
Mean · Zone de distribution
Perfluorooctanoic acid (PFOA) < 0.001 µg/l
below limit of quantification
0.5 µg/l
< 0.2 % *
Mean · Zone de distribution

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Zone de distribution
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean · Zone de distribution
Chlorothalonil metabolite R471811 0 µg/l 0.1 µg/l
0 %
Mean · Zone de distribution

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (2)

Indicator parameters – Zone de distribution
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 453 µS/cm Mean · Zone de distribution
Sodium 6 mg/l 200 mg/l
3 %
Mean · Zone de distribution

Further parameters (4)

Further parameters – Zone de distribution
Parameter Value Parametric value Share of the parametric value Reference
Calcium 83 mg/l Mean · Zone de distribution
Magnesium 13 mg/l Mean · Zone de distribution
Potassium 1 mg/l Mean · Zone de distribution
Total hardness 26 °fH Mean · Zone de distribution

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1469/cefren/3394/zone-de-distribution · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 1762

Frequently asked questions about drinking water in Givisiez

How hard is the water in Givisiez?
SINEF SA publishes a total hardness of 27.5 °fH for the supply zone Givisiez — that corresponds to 15.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Givisiez?
SINEF SA publishes a nitrate value of 11 mg/l for the supply zone Givisiez. The statutory parametric value is 40 mg/l; the measured value represents 27 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Givisiez?
SINEF SA. The values shown here come from the supply zone Givisiez and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.